Brother Pocket Jet PJ-763MFi Operation instructions

Tutorial
for installation
configuration «Stencil Mode»
and first usage
of thermal printer
Brother Pocket Jet

Begin the installation of your Brother Stencil Machine,
downloading the drivers for your O.S. from:
http://support.brother.com/g/b/producttop.aspx?c=it&lang=it&prod=pj763mfieuk
Installation

When the installation of the Brother Stencil Machine is completed, to proceed to the
activation of the "Stencil Mode" you have to update the product firmware.
Configuration «Stencil Mode»
Download the application from
http://support.brother.com/g/b/downloadlist.aspx?c=gb&lang=en&prod=pj723euk&os=10011
Run the setup.exe application and complete the installation wizard.

After the firmware of the Pocket Jet is updated,
install the application “Printer Setting Tools” also provided on the installation CD
included in the box.
Configuration «Stencil Mode»
In the event that your PC is without the CD player, download the application from
http://support.brother.com/g/b/producttop.aspx?c=it&lang=it&prod=pj723euk
Run the setup.exe application and complete the installation wizard.

When the application is installed, turn on the Pocket Jet and connect with the USB cable
to the PC.
Open the application.
Configuration «Stencil Mode»
Select the Print Settings Tab
Click “ON”
Save and Exit

Use only original Spirit paper (Classic or Green Thermal Paper).
Set up the paper by removing the yellow sheet on the back and the velina in the middle.
Avoid handling too much the paper during the set up.
First usage

In the event that the paper is not perfectly aligned,
open up the front cover of the printer and align the paper
manually.
Insert paper in the automatic feeder by checking that the
paper is aligned with the guide on the right and down.
First usage

Assicurarsi che il foglio di carta sia steso ed il
percorso carta libero da ostacoli… ... start printing and wait until the process end.
Make sure the paper is flat and the paper path
free of obstructions…
First usage

Al termine della stampa rimuovere il foglio di carta
aprendo il vano anteriore… ... open up the sheet of paper and see the stencil
printed!
After printing remove the paper by opening the front cover ...
First usage

Mobile device: Bluetooth paring
Press the Bluetooth button to put it into pairing mode.
The Bluetooth indicator will begin to flash blue.
Select the PJ763MFI from your device's Bluetooth list, and
if prompted for a code enter the last 4 number of your s/n
prompted on the back.
The Bluetooth indicator will go solid blue when pairing has
been established.