Broyhill EASTLAKE 2PK AW WICKER CHAIRS User manual

ASSEMBLY INSTRUCTION
ITEM# : GBO21-305-1
SKU# : 810493158
EASTLAKE 2PK AW WICKER CHAIRS
Need help? We are here for you! 1-888-733-8169 Toll Free
Or email us at [e-mail], [e-mail]
[e-mail]

Read all instructions before starting
Clear a flat covered space to being
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the products
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
WARNINGS:
Use the correct screws as indicated. All screws should be hand tight untill the complete piece is assembled ( This will make
the assembly process much easier ). Once the piece is fully assembled, then go back and tight all screws with provided tool.
Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the product
construction.
Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry line or electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be followed to reduce the
risk of personal injury and damage to the product. Please read all instructions before assembly and use.
The chairs are not to be used for standing purposes and will not function as a stool or step-ladder. Use on even surfaces only.
The chair is used at weight of 300lb (136.4kg). Improper use of this product or failure to use as directed may result in injury.
Not intended for commercial use.
MAINTENANCE
STAIN RESISTANT CUSHIONS CARE —— KEEP THE CUSHIONS IN STORAGE IN RAINING DAY.
SPILLS: Immediately wipe up the spill using a white damp cloth. Repeat process if necessary until stain is gone. Allow cushions to air dry.
FABRIC CARE: Hand wash cold, non-chlorine bleach when needed, lay flat to dry. Cool iron if necessary. Do not dry clean.
ALL WEATHER WICKER PRODUCT CARE
Before using, clean the product completely with a soft dry towel. When not in use, wipe free of any dirt or loose objects, wash with a mild
solution of soap and water, rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners. Over time screws can loosen.
Occasinally, check screws on all chairs, re-tighten if necessary.
GENERAL BEST PRACTISE FOR ASSEMBLY:
WARNINGS:
MAINTENANCE:

Part No. Part Qty Image Part No. Part Qty Image
1Right Arm 15Screw(φ6x35mm) 10
2Left Arm 16Washer 10
3Chair Back 17Seat Cushion 1
4Seat Panel 18Back Cushion 1
Tools
PARTS LIST
PARTS LIST:
PRODUCT FRAME MAP
3
1
4
72
8

STEP 1
PART REQUIRED: 2,3
Keep the screw loose.
STEP 2
PART REQUIRED: 1, 2 & 3
Keep the screw loose.
STEP 1
5
STEP 2
X2 X2
X2 X2
2
3
3
1
2
6
5
6
5
6
5
6

STEP 4
Warranty
One-year limited warrantly.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer's responsibility for freight and packing charges to and from the service center.
STEP 3
PART REQUIRED: 1,2,3 & 4
Keep the screw loose.
PART REQUIRED: 7,8
Tighten all the screws.
Finished!
STEP 3
X6 X6
STEP 4
7
8
5
6
5
6
2
3
4
1