Broyhill A208035600 User manual

ASSEMBLY INSTRUCTIONS
ITEM#: A208035600
SKU# 810500183
CASTLE PINES
40 IN CHATING TABLE
Need help? We are here for you! 1(866)578.6569 24/ Ć Toll Free
CASTLE PINES

MAINTENANCE:
WARRANTY:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
2/8
• Please read and understand this entire manual before attempting to assemble or install the product.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Do not place the product on a damp or conductive subsurface.
• Standing on or misuse of this table may result in damage and injury. Read and follow mfg. assembly and use
instructions. Not intended for commercial use.
• Keep all children and pets away from assembly area.
• Children and pets should be supervised when they are in the area of the Chair construction.
• Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches,
laundry line or electrical wires.
• Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure!
• Steel components for this table are treated with rust inhibiting paint that protects it from rusting. However, due to the
nature of steel, surface oxidation (rusting) will occur if these protective coatings are scratched. This is not a defect and
thus not covered by the warranty.
• Do not use bleach, acid, or other abrasive cleaners on the roof or frame parts.
• Keep instruction manual for future reference.
• Surface rust can also be easily removed with a very light application of regular cooking oil or WD-40. If surface
oxidation (rusting) occurs and if no measure is taken to prevent this, the oxidation may start dripping onto deck or
patio and caused damaging stains, which may be difficult to remove. This can be prevented if the above-mentioned
measures are taken to keep the product from oxidizing.
WHAT IS COVERED?
The limited warranty is extended to the original purchaser and applies to material and manufacturer’s defect provided
the item is maintained with care and used only for personal, residential purposes.
Warranty: 12 months

EXPLODED DRAWING
3/8

PARTS LIST
HARDWARE LIST
Label Part Number Description Qty Part Image
A P006500040 Umbrella Hole
Cap 1
B P002100302 Table Top 1
C P005400225 Leg 1 1
D P005400226 Leg 2 2
E P005100321 Adjustable Bolt 1
F P005300076 Adjust Pad
Pre-assembled 4
Label Part Number Description Qty Add Part Image
H1 H100010023 Bolt M6*15 16 2
HW H090030002 Wrench M6 1 0
4/8

HELPFUL HINTS
• Tools needed and not included
• Separating parts before starting
How many people DUHneeded for the installation
Provided in hardware pack Provided
5/8

STEP 1
Assembled View:
Attached the Leg 2 (D) to Leg 1(C) with
Bolt(H1), tighten the Bolt to 80% depth
with Wrench(HW).
1x 2x
6x
6/8

STEP 2
Assembled View:
Attached the Leg 2 (D) and Leg 1(C) to
Table Top (B) with Bolt(H1), tighten all the
Bolt to 100% depth with Wrench(HW) at
last..
1x
10x
7/8

STEP 3
Assembled View:
Put the Umbrella Hole Cap (A) to the
Table Top (B), attach Adjustable Bolt (E)
to Leg 1( C)
1x
1x
8/8