Broyhill Legacy ASHFORD AW GB21-812 User manual

修改
ASSEMBLY INSTRUCTIONS
ITEM# : GB21-812
SKU# : 810499639
ASHFORD AW WICKER CHAIR WITH CUSHION
Need help? We are here for you! 1-888-733-8169 Toll Free
Or email us at [email protected],[e-mail]
[email protected]

Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Helpful hints provided along the way
Retain these assembly instructions for future reference.
WARNINGS:
Use the correct bolts as indicated. All bolts should be hand tighten until the complete piece is assembled ( This will make the assembly
process much easier ). Once the piece is fully assembled, then go back and tighten all bolts with provided tool.
Regularly check hardware and tighten if necessary.
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children and pets away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Chair is for sitting purposes only. Standing on or misuse of chair may result in damage or injury.
Weight limit is 300 lbs ( 136.4 kg). Not intended for commercial use.
MAINTENANCE
Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other solvents on
the frame or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or a commercial foaming upholstery cleaner if necessary.
If washed, rinse well and hang to dry. Do not machine wash or dry.
Well recommend the use of furniture covers when not in use.
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and safety of your product.
In order to prolong the life and beauty of your product, we recommend that it be stored in a dry and protected area during off season periods.
GENERAL BEST PRACTICE FOR ASSEMBLY:
WARNINGS:
MAINTENANCE:

Part No. Part Qty Image Part No. Part Qty Image
1Chair Back 1Right Armrest Support
( with two threaded hole) 1
2Seat Panel Frame 16Short Bolt (M6x15mm) 8
Left Armrest 17Bolt (M6x28mm) 10
Right Armrest 18Bolt (M6x41mm) 2
Left Armrest Support
( with one threaded hole) 19Washer 20
Right Armrest Support
( with one threaded hole) 110 Back Cushion 1
Left Armrest Support
( with two threaded hole) 111 Seat Cushion 1
Tools
PARTS LIST
PARTS LIST:
Tightening Loosing
L3
R3
L4
R4
L5
R4
R3
L3
L4
L5
R5
R5

STEP 4
STEP 1
PART REQUIRED: L3, R3, L4, R4, L5 & R5
Keep the bolts loose.
Note: After assembled, keep all the threaded holes inwards.
PART REQUIRED: 1 & 2
Keep the bolts loose.
STEP 1
X8 X8
9
6
9
6
STEP 2
X4
2
9
7
X4
1
7
9
R3
R4 R5

PART REQUIRED: 1, 2, L3, R3, L4, R4, L5 & R5
Keep the bolts loose.
PART REQUIRED: 1, 2, L3, R3, L4, R4, L5 & R5
Keep the bolts loose.
STEP 4
X6
2
9
7
X6
STEP 3
X2
2
9
8
X2
1
7
9
8
9
R3
R5
R4
L3
L5
L4
R3 L3
L5
R5
R4 L4

Warranty
One-year limited warrantly.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer's responsibility for freight and packing charges to and from the service center.
PART REQUIRED: 10 & 11
Finished!
11
STEP 5
10