Broyhill Logan Ridge Mandrino BL-ET-004 User manual

Determine you have adequate space for assembly.
Assembly by two adults is recommended.
Assemble on soft surfaces to prevent damage to product finish.
Keep children away during assembly. This item contains small parts which can be
swallowed by children.
Do not discard any of packaging until you have checked that you have all parts
and hardware.
Retain the assembly instructions for future reference.
The manufacturer will not accept responsibility for unauthorized repairs or modifications
to this product.
This product is for residential use only, not for commercial use.
Should this product become damaged, and/or components are broken or missing,
DO NOT USE.
Wipe with a damp cloth. Use Furniture polish or lemon oil on the wood as needed.
Avoid prolonged exposure to moisture.
Do not scratch or chip the finish.
Do not put hot objects which are more than 80 degrees Fahrenheit directly on the surface.
Check bolts/screws periodically and tighten if necessary.
To prolong the life of product we recommend storage in a dry area when not in
use or during austere weather conditions.
GENERAL BEST PRACTICES FOR ASSEMBLY:
WARNINGS:
MAINTENANCE:
Page 1 of 4

PARTS LIST
Page 2 of 4
Table Top x1pcs Post x1pcs
Mounting plate x1 pcs
Legs x4pcs
Bottom post x 1 pc
A
D
B
E
C
HARDWARE LIST
5
Spring Washer x 8 pcs Flat Washer x 8 pcs Allen Key x 1pcs
Ø5/16'' Ø5/16''
23
Allen Bolt x 4 pcs
Ø 5/16'' x 32mmL
1
Wood dowel x4pcs
Ø12x40mm
67
Nut x 4pcs
Ø5/16'' x 12mm
Wrench x 1pcs
4

Page 3 of 4
STEP 1
Hardware needed
B
5
C
E
C
B
7
3
6
2
Assembled View:
Insert Wood Dowel (5) into Legs (C).
Align the inserted wood dowels with the holes of Post (B).
Secure the Legs (C) to Post (B) with Flat Washer (3),
Spring Washer (2) and Nut (6) using Wrench (7).
Fully tighten nuts.
Attach the Bottom Post (E) to Post (B) by turning in
clockwise until it tightens.
Adjustable
x4
x4
6
2
x4
x1
7
3
x4
5

STEP 2
PRINTED IN VIETNAM
ASSEMBLY IS COMPLETED
x2
Hardware needed
x1
4
x4
x4
2
3
1
2
3
3
D
B
1
2
3
4
A
Page 4 of 4
Return the assembled post to upright position.
Align the holes of Mouting Plate (D) and slide it into place as shown.
Attach the Mounting Plate (D) to Post (B) with Flat Washer (3), Spring
Washer (2) and Bolts (1) using Allen Key (4). Fully tighten bolts.
Place the Table Top (A) upside down on a smooth surface. Align the
holes of Mounting Plate (D) and Slide it into place as shown.
Attach the Mounting Plate (D) to Table Top (A) with Flat Washer (3),
Spring Washer (2) and Bolts (1) using Allen Key (4). Fully tighten bolts.
Return End Table to upright position.
1