Broyhill A222011906 User manual

ASSEMBLY INSTRUCTIONS
ITEM#: A222011906
SKU#:810546478
SANDPOINTE 6PC
HIGH DINING CHAIRS
Need help? We are here for you! 1(866)578-6569 24/7 • Toll Free
SANDPOINTE

• Please read and understand this entire manual before attempting to assemble or install the product.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Do not place the product on a damp or conductive subsurface.
• Chair is for sitting purpose only. Standing on or misuse of chair may result in damage or injury.
Not intended for commercial use.
• WEIGHT LIMIT 250 LBS(113KG).
• Keep all children and pets away from assembly area.
• Children and pets should be supervised when they are in the area of the Chair construction.
• Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry
line or electrical wires.
• Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure!
• Before using, clean the Chair completely with a soft dry towel.
• Do not use harsh abrasives or cleaners.
• When not in use, store in a cool, dry area.
• Steel components for this table are treated with rust inhibiting paint that protects it from rusting. However, due to the
nature of steel, surface oxidation (rusting) will occur if these protective coatings are scratched. This is not a defect and
thus not covered by the warranty.
WHAT IS COVERED ?
The limited warranty is extended to the original purchaser and applies to material and manufacturer’s defect provided
the item is maintained with care and used only for personal, residential purposes.
Warranty: 12 months
GENERAL BEST PRACTICES FOR ASSEMBLY:
WARNINGS:
WARRANTY:
MAINTENANCE:
2/9

EXPLODED DRAWING
3/9

A P004800006 Chair Back 1
B P007400028 Rotary Plate
Pre-assembled 1
C P005400520 Chair Leg 4
D P000501537 Footrest 1
E P00180017301 Seat Cushion 1
F P005300082 Foot pad
Pre-assembled 4
G P005300047 Foot pad
Pre-assembled 4
JP008100019 Plastic plug
Pre-assembled 2
K P005300013 Plastic plug
Pre-assembled 2
PARTS LIST
Label Part Number Description Qty Part Image
4/9

H1 H010030030 Bolt M6*15 12 2
H2 H010030023 Bolt M6*35 4 1
H3 H050020017 Spring
Washer M6 16 2
H4 H050010025 Flat was her
M6 16 2
HW H090030002 Wrench M6 1 0
HARDWARE LIST
Add
Label Part Number Description Qty Part Image
5/9

• Tools needed and not included
• Separating parts before starting
How many people needed for the installation work
Provided in hardware pack Provided
HELPFUL HINTS
6/9

Assembled View:
Attached Chair Leg(C) to Footrest(D) with
Bolt(H2), Spring Washer(H3) and Flat
washer(H4), tighten the Bolt(H2) to 80%
depth with Wrench(HW).
4x
4x 4x 4x
1x
STEP 1
7/9

Assembled View:
Attached Chair Leg(C) to Seat Back(A) with
Bolt(H1), Spring Washer(H3) and Flat
washer(H4),tighten the bolts on Footrest to 100%
depth at first, then tighthen the Bolts on Rotary Plate
to 100% depth with Wrench(HW) at last.
12x 12x 12x
1x
STEP 2
8/9

Assembled View:
Put the Seat Cushion(E) on the Chair
Back(A).
1x
STEP 3
9/9