BT T46 User manual

T46 Phone Guide

Installation
Included in your parcel
Connecting
If you have a POE (Power over Ethernet) switch, you can power your
phone from your switch, otherwise use the Power Adapter

How to
Transfer a call
There are three ways to transfer a call
Blind Transfer
1. Press the Tran soft key during a call.
2. Enter the number you want to transfer the call to.
3. Finally press the Tran soft key to complete the transfer.
Semi-Attended Transfer
1. Press the Tran soft key during a call.
2. Do one of the following
- Enter the number you want to transfer call to
- Press Directory soft key to find number
3. Now press OK or #send to dial out
4. Press TRAN soft key to complete transfer when receiving ring back
Attended Transfer
1. Press the Tran soft key during a call.
2. Do one of the following
- Enter the number you want to transfer call to
- Press Directory soft key to find number
3. Press OK or #send to dial out
4. After the call is answered press Tran to complete transfer.
Do Not Disturb (DND).
Press the DND soft key when the phone is idle.
The icon on the idle screen indicates that DND is on.
Incoming calls will be rejected automatically and “n Missed Call(s)
” (“n” indicates the number of the missed calls) will prompt on the LCD
screen.

Helpful Icons

Emergency Calls
999 or 112 emergency calls
Your Cloud Voice phone number is registered to a specific address, so when you
make a 999 or 112 call from your phone number, that’s the address the
emergency services will see.
You might not be able to make 999 or 112 calls when there’s a power or network
failure or if using the service through an app on a mobile device.
Call 01782 608608, email [e-mail] or
visit https //telephonesystems.cloud/help/ for additional support.