Buffalo CloudStation CS-X User manual

User Manual
CloudStation
CS-X, CS-WX, and CS-WV
www.buffalotech.com v2.8
™

2
Introduction
Thank you for purchasing the Buffalo CloudStation. This simple device gives you the
exibility of cloud-based storage without the worries that come with storing your important
data on someone else’s servers. Using Pogoplug software, CloudStation lets you serve up
les, photos, and multimedia over the Web to any of your devices, wherever you may be.
Turn to page 4 to set up your CloudStation.
Because we’re constantly updating our products, the images and text in this manual may
vary slightly from the images and text displayed by your CloudStation. As time passes,
future user interfaces, updated software, and later versions of this manual may be available
for download from www.buffalotech.com. For more information on CloudStation, see
buffalocloudstation.com.

3
Table of Contents
Introduction
Setup 4
Diagrams and Layout (CS-WX & CS-WV) 7
Power Mode Switch 10
Diagrams and Layout (CS-X) 11
Using your CloudStation
Login 13
Uploading 14
Downloading 15
Pogoplug Applications 16
Sharing 17
Search 19
Slideshows 20
Creating New Folders 21
Renaming Files and Folders 22
Renaming Devices 23
Active Copy 24
Settings and Conguration
General Settings 25
Social Settings 26
Media Settings 28
Security Settings 29
Upload Settings 30
Adding a Printer 31
Device Settings 34
Local Settings 35
Adding a Second Drive 38
Time Machine 40
BitTorrent Client 41
Direct Copy 43
Troubleshooting
Status LED Flash Codes 45
Appendix
Specications (CS-WX & CS-WV) 47
Specications (CS-X) 48
Contact Information (USA) 49
Contact Information (Europe) 50
GPL Information 51

4
Open a browser window on your computer and go to https://cloudstation.pogoplug.com/. Click
Set Up Your CloudStation.
Plug one end of the included Ethernet cable into the Ethernet port on your CloudStation and the
other end into any available LAN port on your router.
In the browser window, click Next.
Setup
USB
FUNCTION
AUTO
ON
OFF
DC-IN
LAN
LAN
WAN
LAN LAN

5
Now, plug your CloudStation into a surge protector, wall socket, or power strip.
Move the power mode switch on the back of the unit to the on (middle) position. The blue power
LED will begin to blink.
Wait for the CloudStation to boot. This will take about 5 minutes. When the power LED on the
front panel stops blinking and glows steadily, the unit has nished booting. The info/error LED
should not be blinking. If it is, turn to the next page to troubleshoot.
In the browser window, click Next. Follow the instructions on the screen to nish installing your
CloudStation.
USB
FUNCTION
AUTO
ON
OFF
DC-IN
LAN

6
If you’ve connected your CloudStation to a power source and to a router, but the info/error LED
is ashing amber or your CloudStation suddenly turned off by itself, here are some things you
can check:
Is the power mode switch on the back of the CloudStation (CS-WX and CS-WV models only) in
the On position? If it’s in the Auto (top) position, the CloudStation may suddenly shut down
after a few minutes. Move it to the On (bottom) position until you’ve installed NAS Navigator
software on your computers.
Is the amber info/error LED on the front of your CloudStation (CS-WX and CS-WV models only)
ashing? Check the following:
Is the Ethernet cable connected to your CloudStation and to your router?
Is your router turned on?
Is your router congured to automatically assign IP addresses (DHCP)?
Do you have a rewall installed that blocks UDP, or is UDP disabled on your router?
If you have veried all of the above and the info/error LED on the front of your CloudStation is
still ashing, please move the power mode switch to the Off position, wait until the power LED
turns off, and then move it back to the On position. It will take about ve minutes to boot.
If you continue to have problems, please contact tech support. Tech support contact
information is available on pages 49 and 50.
Troubleshooting

7
Back Panel Layout
Front (CS-WX and CS-WV)
Power LED
Function LED
Info/Error LED
Front Cover
(pull the left
side straight
toward you to
remove)

8
Back Panel Layout
Front Panel Removed (CS-WX and CS-WV)
Second hard
drive
Main hard drive
Press tab to
release drive

9
Front Panel Layout
Rear (CS-WX and CS-WV)
Function Button
USB
Fan
Auto Power
Power On
Power Off
Ethernet
(to router)
Power
Socket for
Kensington-style lock
Power cord
stress relief

10
The “Power Mode” switch on the back of the
unit has three positions: Auto, On, and Off.
The Auto position automatically powers the
unit on or off with your PC. If your PC is turned
on the CloudStation will power up; if the PC is
turned off the CloudStation will power down.
You must have installed the NAS Navigator
software (available from www.buffalotech.com)
on your PC for this feature to work. Otherwise,
if you move the switch to Auto, your unit will
power down by itself and you will have to
manually turn it back on.
Move the switch to the On (middle) position to
have the CloudStation turn on and stay on.
To turn off the CloudStation, move the switch
to the Off position. It will take several minutes
to fully shut down. Do not unplug the unit
until shutdown is complete and the power LED
is no longer lit.
Power Mode Switch (CS-WX and CS-WV)
Power
Mode