1. TABLE TOP SIZE 1525×1370× MM- 2 NOS.
2. LEGS (Z) SIZE 765×730×125×50MM - 4 NOS.
3. CENTRE PIPE TO ATTACH LEGS SIZE 1205×125×50MM - 2 NOS.
4. ANGLE TO ATTACH TABLE FRAME WITH LEGS (Z) SIZE 75×9MM - 8 NOS.
5. POST SET - 1 NOS.
6. STEEL NET - 1 NOS.
7. BOLT TOATTACH LEGS (Z) WITH CENTRE PIPE SIZE 75×9MM - 8 NOS.
35
P4
8. BOLT TOATTACH SIDE FRAME WITH POST SIZE 20×8MM - 8NOS.
9. BOLT TO ATTACH POST WITH NET SIZE 38MM- 4 NOS.
10. PLASTIC CAP FOR POST SIZE 25×38MM - 4 NOS.
11. ROD TO ATTACH LEGS WITH GROUND SIZE 9×200MM - 4 NOS.
12. WASHER SIZE 9MM - 4 NOS.
13. SPANNER SIZE 9×7.5MM - 2 NOS.
14. SPANNER SIZE 6×7.5MM - 2 NOS.
P2
P3
P7
P13 - SIZE 9/7.5MM QTY. 2 P14 - SIZE 6/7.5 QTY. 2P6 QTY. 1
ADULT ASSEMBLY REQUIRED
Please read the safety instructions at the bottom of page- 4
STEP - 1
P11
SIZE 9×200MM QTY. 4
P4 & P7
SIZE 75×9MM QTY. 16 P9
SIZE38MM QTY. 4 P8
SIZE 20×8MM QTY. 8
P4 & P7
SIZE 9MM QTY. 16
P 12
SIZE 9MM QTY. 4 P 5
QTY. 4 P 2
SIZE 765×730×125×50MM QTY. 4 P 3
SIZE 1205×125×50MM QTY. 2
Attach
pipe (P3)
with legs (P2) using
nut & bolt size
75×9mm & tighten
it with help of to
spanners (P13)
centre
STEP - 2
Repeat step 1 for second half
Attach table frame angle
(P4) with legs (Z) (P2)
using nut & bolt size 75×9mm
& tighten it with the help of
2 spanners (P13)
STEP - 3
PARTS LIST
P1
P5
P6
P8
P9
P10
P11