BVF NYBRO User manual

SMART PANEL HEATER
user manual

2
ENG
SAFETY ADVICE
READ THIS NOTICE CAREFULLY BEFORE OPERATING THE APPLIANCE.
• This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children without supervision.
• Children of less than 3 years should be kept away unless continuously supervised.
• Children aged from 3 years and less than 8 years shall only switch on/o the appliance
provided that it has been placed or installed in its intended normal operating position and
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children aged from 3 years and less than 8 years
shall not plug in, regulate and clean the appliance or perform user maintenance.
• CAUTION - Some parts of this product can become very hot and cause burns.
Particular attention has to be given where children and vulnerable people are
present.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualied persons in order to avoid a hazard.
• CAUTION - In order to avoid a hazard due to inadvertent resetting of the thermal cutout,
this appliance must not be supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and o by the utility.
• WARNING - In order to avoid overheating, do not cover the heater.
• The heater must not be located immediately below a socket-outlet.
• Do not use this heater in the immediate
surroundings of a bath, a shower or a swimming
pool.
• Always use your appliance with rollers or feet
xed.
• Fixed heaters are to be installed so that switches
and other controls cannot be touched by a person
in the bath or shower.
• Warning: this product shall be installed in the
volume 2 only according the national wiring rules
(For France NF C 15-100).
• Note - The drawing below is for reference only.
• We suggest that you contact a professional
electrician for assistance.
CONTENTS
Safety advice.................................................................................................................................................................................................................................. 10
Installation ...................................................................................................................................................................................................................................... 11
How to use ..................................................................................................................................................................................................................................... 13
WiFi conguration and video tutorials ............................................................................................................................................................ 15
Cleaning and maintenance .......................................................................................................................................................................................... 15

BVF NYBRO SMART PANEL HEATER 3
ENG
INSTALLATION
Wall mounting
Make sure that the distance from walls and
objects is respected.
Optional stand feet
Put the heater on a at, dry and clean surface. Install the feet as shown on the below drawing.

4
ENG
Warning! Be sure to keep the distance between the heater and oor, wall and so on at least
30cm.
Warning! When drilling holes, always check to ensure there is no wiring, pipework, etc. in the
area to be drilled.
A. Put the hanging rack on the wall as a guide ruler (please make sure the holes at parallel
level), use a mark pen to mark the hole position.
B. Drill holes on the wall with ø8mm drill bit and insert the plastic wall plug.
C. Fasten the hanging rack on the wall with the screws, do make sure the hanging rack is in
correct direction.
D. Gently insert the heater body of the bottom to the hanging rack rst and then push the
heater body to be hooked on the whole hanging rack.
Warning! Before plugging in the unit make sure the radiator is properly attached to the wall.
Otherwise problems can occur.

BVF NYBRO SMART PANEL HEATER 5
ENG
HOW TO USE
Standby
WiFi indicator
Increase function
Comfort mode indicator
Decrease function
ECO mode indicator
Mode selection
Heating status indicator
WiFi
Standby indicator: on/o
Timer
Timer indicator
1. Plug the appliance to the socket, and press down the on/o switch. The standby indicator
light is on.
2. Press to turn on the heater, which is in state of factory default when rst time use.
Factory default: Heating mode: comfort mode | Target temperature setting: 22°C
  Date:1(Monday);Time:00:00(O)|Windowopenfunction:O|Timer:O
Ifdefaultsettingsaredierent,itwillsimplybecausetheunithasbeenqualitytestedafter
production.
3. To stop the heater working, press to turn o the heater.
Unplug the product when it’s not in use.
Clock and day of week setting
1. Press down 3 secs to enter clock and day of week setting.
2. The screen display d, press and to select the day from 1-7.
1:Monday,2:Tuesday,3:Wednesdayetc.
3. Press to conrm day setting and enter the clock hour setting, with the screen display H.
4. Press and to set the current hour.
5. Press to conrm hour setting and enter the minute setting, with the screen display .
6. Press and to set the current minute.
7. Press to conrm settings.
Note: The clock and calendar will be reset to factory default if without power supply.
U
Heating mode
• Press to enter mode selection. By pressing ,
heating mode runs in a continuous cycle:
Comfort mode: press and to set the temperature from 5-35°C.
ECO mode: press and to set the temperature from 1-31°C.
Note: ECO mode = Comfort mode – 4°C
Pre-set heating program.
Note:Iftheclockanddaysettingarenotnished,thersttimetoenterP1/P2/P3programset-
ting,itisrequestedtosetdayandclocksettinginadvance.
Anti-frost mode: the target temperature is 7°C. The temperature can’t be adjusted.
P1
Fr
P2 P3

6
ENG
P3 adjustable program setting
1. When under P3 mode, press over 3 secs to enter day setting.
2. The screen displays d1, press and to set from d1– d7(Monday-Sunday).
3. Press to conrm and enter hour setting, the screen displays 00 .
4. Press and to set from 00-24.
5. Press to choose heating mode for every hour (Comfort mode: , ECO mode: ,
Anti-frost mode: neither of 2 lights are illuminated).
6. Repeat the operation until you have completed the schedule of every hour and every day.
Note: After setting heating mode for hour 23, press to come back to day setting.
Note: when screen displays d7 , press nish all setting with display of P3 .
Timer off function
1. Press one time, the screen display 0H and keeps ashing.
2. Press and to set timer from 0-24 hours.
3. Press again to conrm setting, the timer indicator light is on.
Open window function
• When the product is in status of stand-by, long press the screen display O or OF,
press or to set the open window function on or o.
• When the heater is under working, the temperature of environment decrease 2 degrees
within 2 minutes, the open window function will be activated, the heater will stop working.
The screen will display E3 , press to get back working.
Default program schedules
P1: (Monday-Sunday) Unadjustable program
P2: (Monday-Friday) Unadjustable program
P2: (Saturday-Sunday) Unadjustable program
P3: (Monday-Friday) Adjustable program
P3: (Saturday-Sunday) Adjustable program
U

BVF NYBRO SMART PANEL HEATER 7
ENG
Sensor calibration
1. When in stand-by mode, long press and buttons together for 3 seconds
2. The screen will display the current temperature which the heater read from it’s sensor.
3. Press or , to make the temperature as the right temperature you read from other
device (room thermometer).
Forexample,theheaterdisplays20degrees,buttheexactrightroomtemperatureis22degrees,
thenpress tomakeitinto22,done.
Notes: to calibrate the temperature, pls ensure the heater is already working for more than
30 minutes.
WIFI CONFIGURATION AND VIDEO TUTORIALS
For up-to-date information please visit the website or scan the QR code below.
CLEANING AND MAINTENANCE
• Switch o and unplug from the power supply before cleaning.
• Using a soft, moist cloth, with or without a mild soap solution, carefully clean the exterior
surface of the product.
• CAUTION: Allow the product to completely cool before handling or cleaning it.
• Do not allow water or other liquids to run into the interior of the product, as this could crea-
te a re and/or electrical hazard.
• We also recommend the periodic cleaning of this appliance by lightly running a vacuum
cleaner nozzle over the guards to remove any dust or dirt that may have accumulated inside
or on the unit.
• CAUTION: Do not use harsh detergents, chemical cleaners or solvents as they may damage
the surface nish of the plastic components.
This marking indicates that this product should not be disposed with other household was-
tes throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for environmental safe
recycling.
bvfheating.sk/nybro

8
ENG
Table 1
Information requirements for electric local space heaters
Model identier(s): BVF-NYBRO500
Item Sym-
bol Value Unit Item Unit
Heat output Type of heat input, for electric storage local
space heaters only
Nominal heat output Pnom 0.5 kW Manual heat charge control with inte-
grated thermostat No
Minimum heat output
(indicative) Pmin 0.5 kW Manual heat charge control with room and/or outdoor temperature feedback No
Maximum continuous heat
output Pmax,c 0.5 kW
Electronic heat charge control with
room and/or outdoor temperature
feedback
No
Auxiliary electricity consumption Fan assisted heat output No
At nominal heat output elmax NA kW Type of heat output/room temperature
control
At minimum heat output elmin NA kW Single stage heat output, no room
temperature control No
In standby mode elSB 0.00061 kW Two or more manual stages, no room
temperature control No
With mechanic thermostat room tem-
perature control No
Model identier(s): BVF-NYBRO1000 With electronic room temperature
control No
Item Sym-
bol Value Unit With electronic room temperature control plus day timer No
Heat output With electronic room temperature
control plus week timer Yes
Nominal heat output Pnom 1.0 kW Other control options
Minimum heat output
(indicative) Pmin 1.0 kW Room temperature control, with pres- ence detection No
Maximum continuous heat
output Pmax,c 1.0 kW Room temperature control, with open window detection Yes
Auxiliary electricity consumption with distance control option Yes
At nominal heat output elmax NA kW with adaptive start control No
At minimum heat output elmin NA kW with working time limitation No
In standby mode elSB 0.00061 kW with black bulb sensor No
Contact details

BVF NYBRO SMART PANEL HEATER 9
ENG
Table 1
Information requirements for electric local space heaters
Model identier(s): BVF-NYBRO1500
Item Sym-
bol Value Unit Item Unit
Heat output Type of heat input, for electric storage local
space heaters only
Nominal heat output Pnom 1.5 kW Manual heat charge control with inte-
grated thermostat No
Minimum heat output
(indicative) Pmin 1.5 kW Manual heat charge control with room and/or outdoor temperature feedback No
Maximum continuous heat
output Pmax,c 1.5 kW
Electronic heat charge control with
room and/or outdoor temperature
feedback
No
Auxiliary electricity consumption Fan assisted heat output No
At nominal heat output elmax NA kW Type of heat output/room temperature
control
At minimum heat output elmin NA kW Single stage heat output, no room
temperature control No
In standby mode elSB 0.00061 kW Two or more manual stages, no room
temperature control No
With mechanic thermostat room tem-
perature control No
Model identier(s): BVF-NYBRO1000 With electronic room temperature
control No
Item Sym-
bol Value Unit With electronic room temperature control plus day timer No
Heat output With electronic room temperature
control plus week timer Yes
Nominal heat output Pnom 2.0 kW Other control options
Minimum heat output
(indicative) Pmin 2.0 kW Room temperature control, with pres- ence detection No
Maximum continuous heat
output Pmax,c 2.0 kW Room temperature control, with open window detection Yes
Auxiliary electricity consumption with distance control option Yes
At nominal heat output elmax NA kW with adaptive start control No
At minimum heat output elmin NA kW with working time limitation No
In standby mode elSB 0.00061 kW with black bulb sensor No
Contact details

NYBRO.SK
bvfheating.sk
This product is only suitable for well insulated spaces or occasional use.