BZB Gear BG-DA-1X4AS User manual

BG-DA-1X4AS
1x4 HDMI 2.0 Splitter with
Scaler/Audio Extract

Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this manual
for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Table of Contents
1. Introduction...........................................................................................1
2. Features.................................................................................................1
3. Package Contents.................................................................................1
4. Specifications........................................................................................2
5. Operation Controls and Functions......................................................3
5.1. Front Panel...................................................................................3
5.2. Rear Panel. ...................................................................................4
6. Application Example.............................................................................5
7. Warranty. ...............................................................................................6
8. Mission Statement. ...............................................................................7

1
1. Introduction
The 1x4 HDMI 2.0 Splitter simultaneously routes one HDMI source to four
HDMI displays. It supports resolutions up to 4K2K@60Hz (4:4:4) and HDCP
2.2. This product supports audio extraction from the HDMI source to optical
and analog outputs. It also features COPY and AUTO EDID settings.
Output supports bypass and downscaler (4K->1080P) functions.
2. Features
☆ HDMI 2.0b, HDCP2.2/HDCP1.4 compliant.
☆ Supports HDMI resolution the maximum up to 4K2K@50/60Hz (4:4:4)
☆ Supports digital and analog audio extract output from the HDMI source.
☆ Supports output bypass and 4K->1080P downscaler function via dial
switch on panel.
☆ EDID features COPY and AUTO modes selectable via dial switch on panel.
(COPY: It copies OUT 1 port EDID setting to all output ports, If no HDMI
OUT 1 capable EDID is detected then the unit will copyHDMI OUT 2. If no
HDMI OUT 1~2 capable EDID is detected then the unit will copy HDMI
OUT 3...etc. Thepriority order is OUT 1 to OUT 4.
AUTO: Compare OUT 1~OUT 4 EDID setting and output the best resolution
supported by all outputs).
☆ Supports analog audio PCM 2.0.
☆ Supports optical audio pass-through format about LPCM 2.0/2.1/5.1CH,
Dolby 5.1, Dolby True HD, Dolby DD+, DTS 5.1, DTS-ES 6/DTS-HDMA
5.1, DTS HD-HRA 5.1.
3.
Package Contents
① 1× 1×4 HDMI 2.0 Splitter
② 1× 5V/1A PowerAdapter
③ 1× User Manual

2
4. Specifications
Technical
HDMI Compliance
HDMI 2.0b
HDCP Compliance
HDCP 2.2 and HDCP 1.4
Video Bandwidth
18Gbps
Video Resolution
720P50/60Hz, 1080P50/60Hz, 4K2K24Hz, 4K2K30Hz,
4K2K@50/60Hz (4:4:4)
Color Space
RGB, YCbCr 4:4:4, YCbCr 4:2:2
Color Depth
4K60Hz 8-bit, 1080P 12-bit
HDMI Audio Formats
LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,
DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
L/R Audio Formats
PCM 2.0
Optical Audio Formats
LPCM[2.0/2.1]CH, Dolby 5.1, Dolby True HD, Dolby DD+,
DTS 5.1, DTS-ES 6, DTS-HDMA 5.1, DTS HD-HRA 5.1
ESD Protection
Human-body Model: ±8kV (Air-gap discharge) ,
±4kV (Contact discharge)
Connections
Inputs
1×HDMI Type A [19-pin female]
Outputs
4×HDMI Type A [19-pin female]
1×L/R Audio out [3.5mm Stereo Mini-jack]
1×Optical out [S/PDIF]
Mechanical
Housing
Metal Enclosure
Color
Black
Dimensions
180mm(W)×62mm(D)×14mm(H)
Weight
227g
Power Supply
Input: AC100~240V 50/60Hz
Output: DC5V/1A(US/EU standards，CE/FCC/UL certified)
Power Consumption
3.5W
Operating
Temperature
0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature
-20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity
20~90% RH (non-condensing)

3
AUTO
CO P Y
OF F
ON
POWER IN
SE RVIC E
EDID
1 2 3 4
4K 1080P
1 2
3
4
5
6
OU T 1 OU T 2 OU T 3 OUT 4
5. Operation Controls and Functions
5.1 Front Panel
Number
Name
Function description
1
POWER LED
This blue LED will illuminate when the unit is connected
to an active power supply.
2
HDMI INPUT
LED
This blue LED will illuminate when the HDMI IN port is
connected to an active HDMI source.
3
HDMI
OUTPUTLED
These blue LEDs will illuminate when the HDMI OUTport
is connected an active display device.
4
SERVICE port
Firmware update used. (Manufacturer use only.)
5
EDID
•AUTO: Compare the EDID setting of the HDMI OUT 1~ 4
port displaydevice,then transmit the best EDID signal to
source device, the source device will transmitagainthe
EDID signal to all outputs.
•COPY: Copythe HDMI OUT1 portEDIDsettingto source
device(IfnoHDMIOUT1capable EDID is detected then
the unit will copy HDMI OUT 2. If no HDMI OUT 1~2
capable EDID is detected then the unit will copy HDMI
OUT3...etc.ThepriorityorderisOUT1toOUT4), thesource
device will transmit again the signal to all outputs.
6
Dial switch
(4K→1080P)
•OFF: When the dial switch is dialled in ‘OFF’ position ,
signal input and output is in bypassmode.
•ON: When the dial switch isdialled in ‘ON’position,signal
input will downscale(4k->1080P ) output.

4
5.2 Rear Panel
HDMI OU T 4 HDMI OUT 3 HDMI OUT 2 HDMI OUT 1 OPTICAL OUT L/R OUT HDMI IN DC 5V
Number
Name
Function description
1
HDMI OUTPUT
Connectto HDMIdisplaydevice.
2
OPTICAL OUT
Optical audio output.
(This port outputs audio from HDMI IN port.)
3
L/R OUT
Analog audio output.
(This port outputs audio from HDMI IN port.)
4
HDMI IN
Connect to HDMI source device.
5
DC 5V
Plug the 5V/1A DC power supply into the unit and
connect the adapter to an AC outlet.
1
2
3
4
5

5
6. Application Example
HDMIOUT4 HDMIOUT3 HDMIOUT2 HDMIOUT1 OPTICAL OUT L/R OUT
HDMI IN DC 5V
UHDTV
UHDTV
Amplifier DVD or Blu-ray Player
2.0 Speakers

6
7. Warranty
BZBGEAR wants to assure you peace of mind. We're so confident in the
quality of our products that along with the manufacturer's one-year
limited warranty, we are offering free second-year warranty coverage
upon registration*.
Taking advantage of this program is simple, just follow the steps below:
1. Register your product within 90 days of purchase by visiting
BZBGEAR.com/warranty.
2. Complete the registration form. Provide all necessary proof of
purchase details, including serial number and a copy of your sales
receipt.
For questions, please call 1.888.499.9906 or email
suppor[email protected].
For complete warranty information, please visit BZBGEAR.com/warranty
or scan the QR code below.
*Terms and conditions apply. Registration is required.

7
8. Mission Statement
BZBGEAR manifests from the competitive nature of the audiovisual
industry to innovate while keeping the customer in mind. AV solutions
can cost a pretty penny, and new technology only adds to it. We believe
everyone deserves to see, hear, and feel the advancements made in
today’s AV world without having to break the bank. BZBGEAR is the
solution for small to medium-sized applications requiring the latest
professional products in AV.
We live in a DIY era where resources are abundant on the internet. With
that in mind, our team offers system design consultation and expert tech
support seven days a week for the products in our BZBGEAR catalog.
You’ll notice comparably lower prices with BZBGEAR solutions, but the
quality of the products is on par with the top brands in the industry. The
unparalleled support from our team is our way of showing we care for
every one of our customers. Whether you’re an integrator, home theater
enthusiast, or a do-it-yourselfer, BZBGEAR offers the solutions to allow
you to focus on your project and not your budget.