CALIVE FLUTTERBY 640W User manual

0130 0131
Warning
FLUTTERBY 640W
Warranty
FLUTTERBY 640W
1. The installation should be performed by qualified electricians or technicians.
2. Before conducting any installation, maintenance, or removal, the luminaires should
be powered off and cooled down.
3. Do not touch the fixture while it is turned on.
4. If there are any issues with the fixture, do not power off and attempt to repair
it unless you are a qualified technician, electrician, or customer service member.
GROWWING I product is covered by a 5 year limited warranty. GROWWING I
grow light warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 5 years from date of
purchase. To obtain warranty service please contact your local distributor or sales
rep for further instruction.
CALIVE LLC reserves the right to update all product
data sheets at any time. Consult CALIVE marketing
specialists for publication updates at [email protected]
Copyright©2021–2022 CALIVE LLC,
All Rights Reserved.
1460 Park Avenue.
Emeryville, CA 94608 USA
www.calivellc.com
CALIVE
GROW LIGHT
FLUTTERBY
640W
Total PPF: 1,750 μmol/s
380 430 480 530 580 630 680 730 780
POWER 640W
INPUT VOLTAGE 100–277V
DIMMING 0–10V Dim (Inventronics)
FIXTURE DIMENSIONS 43.9" L x 45.7" W x 2.8" H
LED CHIPS Lumleds + Prolight (660nm)
LED EFFICACY 2.8μmol/J Total PPF: 1,750μmol/s

0132 0133
Installation Guide
FLUTTERBY 640W
01.
02.
Gently open the luminaire until it is flat.
Attach the Y-fit hangers to the luminaire
on the four positions shown above
and then hang the other ends onto a
sturdy surface.
03.
Connect the AC power cord and the
dimming cord for dimming options.
AC Power Soure
Dimming Device
Please open the cable connector cap
before you connect the cable.
Cable
Connector Cap
A B
Connect plug A to plug B on each light.