Callpod Phoenix User manual

a
e
g
i
h

Standard Bluetooth 2.0
Frequency Band 2.4 - 2.4865 GHz
Modulation MethodP 1/4 DQPSK (2Mbps) & 8 DPSK (3Mbps)
Spread SpectrumAFH (Adaptive Frequency Hopping)
RF Output Power Class 1
Working RangeUp to 100 meters (328 ft.)
Sensitivity =<81.0 dBm at 0.1% BER
Input Power 3.7 VDC Built in Lithium Ion Batteryor 5VDC
I/O Interface USB/Bluetooth
®
Baseband Bluetooth V2.0 + EDR Features Including AFH
Services Supported Headset 1.0, Hands-free 1.5
EnvironmentOperating Temp: 0C to +50 C / 32 F to 122 F
Dimensions/Weight 2.75"W [69.85mm]x 4.87"L [123.70mm]x 1.02"H [25.90mm]; 6.2 oz [175.8 g]
Storage Temp: -10 C to +70 C / 14 F to 158 F
Humidity: 5to 90% Non-Condensing
Battery
Specifications
Functional Time: Upto 8 Hours at Full Capacity
Chariging Time: 8 Hoursfor Full BatteryCharge
Specifications

a
b
c
d
e
f
g

a
d
c
b
g
f
e

Before using your Callpod®Dragon headset, you must fully charge the headset.
Charge the Dragon using the included Chargepod adapter. The Dragon is
powered by an internal lithium-ion rechargeable battery. Please do not attempt
to remove the battery from the case, as damage will occur to the headset and
void your warranty.
The red indicator light will turn on during charging. It may take a moment before
charging starts, and it may take up to 2 hours to fully charge the battery. When
charging is complete, the red LED will turn off.
If the battery becomes low on power while the headset is in use, you will hear a
short beep every 20 seconds.
Charging