CAMBRIONIX TS3-C10 User manual

User Manual
TS3-C10
سسس/ش
©2021Cambrionix Ltd.ﻊﻴﻤﺟقﻮﻘﺤﻟا.ﺔﻇﻮﻔﺤﻣ
EN

TS3-C10ﺔﺤﻔﺻ1ﻦﻣ36
1.Table of Contents
1.Table of Contents1
2.Your TS3-C10 at a glance3
2.1.Key Features3
3.Safety4
3.1.Signal word panel4
3.2.Safety alert symbol5
3.3.Pictograms5
3.4.Product modification5
3.5.Power supply6
3.6.Storage and Installation7
4.Getting Started8
4.1.Opening your product8
4.2.What's Included8
4.3.Connecting to the mains9
4.4.لﺎﺼﺗﻻاﻒﻴﻀﻤﻟﺎﺑ9
4.5.Registration9
4.6.Help and Support9
5.Using your TS3-C1011
5.0.1LED Configuration11
5.1.Using without connecting to host11
5.2.Using when connected to host11
5.2.1Connecting the Hub to a host computer12
5.2.2ﺾﻳﻮﻔﺗThunderbolt ™ hubsﻰﻠﻋLinux®12
5.2.3Charging12
5.2.4Data Transfer13
5.2.5ﺔﻬﺟاولﺎﺼﺗﻻالﻮﻛﻮﺗوﺮﺒﻟاو14
5.3.Scalability15
5.4.Manage Ports & Your TS3-C1016
5.4.1Port Modes16
5.4.2Charging Profiles16
5.4.3Firmware16
5.5.Software18
5.5.1Installing-Software18
5.5.2LiveViewer19
5.5.3Cambrionix API20

TS3-C10ﺔﺤﻔﺻ2ﻦﻣ36
5.5.4Updating Software20
5.5.5Removing Software21
5.5.6Command Line Instructions (CLI(22
5.6.Cleaning your TS3-C1024
6.Product Specifications25
6.1.تﺎﺒﻠﻄﺘﻣﺔﻗﺎﻃلﺎﺧدﻹا25
6.2.جﺎﺘﻧاﺔﻗﺎﻄﻟا25
6.3.تﺎﻔﺻاﻮﻤﻟاﺔﻳدﺎﻤﻟا25
6.4.داﻮﻤﻟاﺔﻴﻛﻼﻬﺘﺳﻻاﻊﺿووﺮﻣاوﻷا25
6.5.Power Supply28
7.Troubleshooting29
7.1.Initial troubleshooting tips29
7.2.Logging through LiveViewer29
7.3.Hardware Failure29
7.4.Device connection.30
7.5.Hub connection issues31
7.6.No GUI31
8.Disposal33
9.Returns and Damaged Products34
9.1.What do I do if my order arrives and something the product is faulty
or is physically damaged?34
9.2.What happens after I have requested a Return?34

TS3-C10ﺔﺤﻔﺻ3ﻦﻣ36
2.Your TS3-C10 at a glance
The TS3-C10 has been designed to provide high-speed data transfer to USB compliant devices
without being constrained by endpoint limits.
The TS3-C10 can charge attached USB devices without using a local computer. The TS3-C10
allows almost any device to be charged at its optimum rate (up to 3أ.(The firmware can be up-
dated to ensure the TS3-C10 can charge the latest devices. It is ready to charge out-of-the-box
and to sync devices when attached to a host computer.
When a local (host) computer is attached the host can control the operation of each individual
port using software provided by Cambrionix. Device charging and synchronisation can be
monitored through Cambrionix’s LiveViewer Application, the Application Programming
Interface (API) or Command Line Interface (CLI). Cambrionix’s free monitoring and control
software can be downloaded from www.cambrionix.com/products/api
With your TS3-C10 there is a Thunderbolt™ connection to the host which is capable of up to ,
meaning your upstream speeds to the host will be capable of this data transfer rate. The
upstream data transfer rate will be shared amongst the downstream 10ﺬﻓﺎﻨﻣUSB 3.2ﻦﻣعﻮﻨﻟاC
connections.
2.1.Key Features
Up To
5ﺖﺑﺎﺠﻴﺟﻲﻓﺔﻴﻧﺎﺜﻟا
per Port
Up To
3أ
per Port
Up To
60
Devices
Transfer Data SeamlesslyPowerScalability
Each high speed port can
transfer data up to 5ﺖﺑﺎﺠﻴﺟ
ﻲﻓﺔﻴﻧﺎﺜﻟا
Each port can charge devices up
to 3أ)15طاو(
Up to 60 devices can be
connected at once using
multiple hubs

TS3-C10ﺔﺤﻔﺻ4ﻦﻣ36
3.Safety
This user manual is for informational purposes only, it contains information for start-up and
operation of this product. Note: the contents and the product described are subject to change
without notice. To avoid injuries and damage observe the safety instructions of the user
manual.
This manual has been arranged to follow IEC/ICEE 82079-1 standards. This is to facilitate the
easier understanding and location of information relating to the TS3-C10. Any errors or
omissions can be reported back using our support ticket system (see"Help and Support") this
way any issues can be collected and fixed.
Understanding and observing the instructions in this user manual are prerequisites for
hazard-free use and safety during operation. This user manual cannot cover all conceivable
applications. If you would like additional information or if problems arise that are not
sufficiently addressed in this manual please ask your distributor or contact us directly using the
means preferred which are located on the back cover of this manual.
رﺬﺤﻟا
Personal Injury and Damage to the product
lObserve the safety instructions in this user manual
3.1.Signal word panel
Depending on the probability of serious consequences, potential dangers are identified with a
signal word, the corresponding safety colour, and if appropriate, the safety alert symbol.
رﺬﺤﻟا
Indicates a potentially hazardous situation which, if not avoided, may result in moderate or
minor (reversible) injury.
رﺬﺤﻟا
Indicates a potentially hazardous situation which, if not avoided, may result in damage to the
product and/ or its functions or of a property in its proximity.

TS3-C10ﺔﺤﻔﺻ5ﻦﻣ36
3.2.Safety alert symbol
Use of the safety alert symbol indicates a risk of injury.
Observe all measures that are marked with the safety alert symbol in order to
avoid injury
3.3.Pictograms
Warning Signs
Electrical hazardFire Hazard
Mandatory action signs
Read operating instructionsMandatory regulation
3.4.Product modification
Cambrionix products are designed and manufactured to meet the requirements of UK and
International safety regulations. Modifications to the product could affect safety and render the
product non-compliant to relevant safety standards, which could result in injury or damage to
the product.
رﺬﺤﻟا
Electric shock or personal injury may occur
lDo not modify the product in any way

TS3-C10ﺔﺤﻔﺻ6ﻦﻣ36
رﺬﺤﻟا
lDo not dismantle the product
رﺬﺤﻟا
Fire or personal injury may occur
lDo not obstruct air vents on the product
lDo not cover the product in combustible material
رﺬﺤﻟا
Damage to your product may occur
lDo not bend or compress any part of the product
3.5.Power supply
This section describes safety precautions you must follow when using the power supply.
رﺬﺤﻟا
Electric shock or personal injury may occur
lDo not use a damaged power cord or plug, or a loose power socket
lDo not touch the power plug with wet hands
lDo not allow liquids to come into contact with the unit or power supply
رﺬﺤﻟا
Damage to your product may occur
lDo not short circuit the Power Supply Unit (PSU) supplied with your
product
lDo not disconnect the power cord while the product is being used

TS3-C10ﺔﺤﻔﺻ7ﻦﻣ36
رﺬﺤﻟا
lDo not bend or pull the power cord with excessive force
3.6.Storage and Installation
This section describes safety precautions you must follow when installing and storing your TS3-
C10.
رﺬﺤﻟا
Electric shock or personal injury may occur
lDo not place the power cord near heat sources
lConnect the plug to an earthed socket
رﺬﺤﻟا
Damage to your Cambrionix product may occur
lOperate the product only in an environment where the ambient
temperature is inside the operating temperature range
lOperate the product only in an environment where the relative humidity is
inside the operating range
lBe careful not to leave the power cord underneath a heavy object
رﺬﺤﻟا
Overheated power sockets may cause a fire
lDo not overload the power socket that your hub is connected to
lInsert the power plug all the way into the socket so that it is not loose

TS3-C10ﺔﺤﻔﺻ8ﻦﻣ36
4.Getting Started
This manual provides a reference for end-users who are installing for the first time and using
their hub thereafter. As well as a guide for product safety-related information.
The TS3-C10 is intended to be used in an indoor static environment in which the environment
falls within the tested specifications to provide charge, sync and management functionality. For
information on the environment specifications please see the physical specifications section of
this manual.
4.1.Opening your product
When you have received your product please check the packing slip to ensure all products and
quantities of them are correct before opening. This is to avoid retesting and repackaging any
items which are not required.
When opening the packaging use a suitable method to open the box i.e. do not use a knife. This
is to ensure the product is not damaged.
4.2.What's Included
l
Thunderbolt ™ 3 Cable (to provide communication between host system and the hub(
l
TS3-C10 Hub
l
2m Mains power cable (Country specified on order including fuse for UKplugs(
l
Power Supply Unit
ءﺰﺟﻒﺻﻮﻟاﻢﻗرﺔﻌﻄﻘﻟا
Thunderbolt ™ 3ﻞﺑﺎﻛﺚﻳﺪﺤﺘﻟا200369
ةﺪﺣوتاداﺪﻣاﺔﻗﺎﻄﻟا200402
ﻞﺑﺎﻛءﺎﺑﺮﻬﻜﻟاﻲﻧﺎﻄﻳﺮﺒﻟا200144
ﻞﺑﺎﻛﺔﻗﺎﻄﻟاﻲﻜﻳﺮﻣﻷا200327
ﻞﺑﺎﻛﺔﻗﺎﻃدﺎﺤﺗﻻاﻲﺑوروﻷا200329
ﻞﺑﺎﻛﺔﻗﺎﻄﻟاAUS200337
ﻞﺑﺎﻛءﺎﺑﺮﻬﻜﻟاIND200341

TS3-C10ﺔﺤﻔﺻ9ﻦﻣ36
4.3.Connecting to the mains
Connect the Power Supply Unit (PSU) to the hub using the 4نﻮﻨﺳﻲﻨﻴﻣﻦﻳدplug.ﻢﻗﻞﻴﺻﻮﺘﺑﻞﺒﻛ
ﺔﻗﺎﻄﻟاةﺪﺣﻮﺑPSU.ﺪﻛﺄﺗﻦﻣماﺰﺘﻟﻻاﺢﺋاﻮﻠﺑﺔﻣﻼﺴﻟاﺔﻴﻠﺤﻤﻟا،ﻢﻗوﻞﻴﺻﻮﺘﺑﻞﺒﻛﺔﻗﺎﻄﻟاﺬﺧﺄﻤﺑﺔﻗﺎﻄﻟاﻲﺴﻴﺋﺮﻟا100-
250ﺖﻟﻮﻓرﺎﻴﺗددﺮﺘﻣﻢﻗوﻞﻴﻐﺸﺘﺑرﻮﺤﻤﻟاماﺪﺨﺘﺳﺎﺑحﺎﺘﻔﻣﺔﻗﺎﻄﻟاﺮﻴﻐﺼﻟادﻮﺟﻮﻤﻟاراﻮﺠﺑﻞﺻﻮﻣلﺎﺧدإﺔﻗﺎﻄﻟاﻲﻓ
.رﻮﺤﻤﻟاﺪﻨﻋﻞﻴﻐﺸﺗزﺎﻬﺠﻟا،ءﻲﻀﻴﺳﺮﺷﺆﻣLED.ﺮﻤﺣأرﻮﺤﻤﻟاﺰﻫﺎﺟنﻵاﻦﺤﺸﻟةﺰﻬﺟﻷا.ﺔﻠﺼﺘﻤﻟا
Periodic inspection should be made to power supply cables and any USB cables for any signs of
damage. If any damage is found then replace damaged cord before further use.
4.4.لﺎﺼﺗﻻاﻒﻴﻀﻤﻟﺎﺑ
Once the power is connected connect the TS3-C10 to your host system using a Thunderbolt ™ 3
cable.ﺪﻗيدﺆﻳماﺪﺨﺘﺳاﻞﺒﻛﻒﻴﻀﻣﺮﻴﻏﺢﻴﺤﺻﻰﻟإمﺪﻋفﺮﻌﺘﻟاﻰﻠﻋﺔﺣﻮﻟﻞﺻﻮﻟاﻊﻴﻤﺟوﺬﻓﺎﻨﻤﻟاﺔﻘﺣﻼﻟاﻦﻣﻞﺒﻗ
.ﻚﻔﻴﻀﻣ
Cambrionix would recommend using the Thunderbolt™ cable that is provided with our TS3-C10.
اذإﺖﻨﻛﺚﺤﺒﺗﻦﻋءاﺮﺷﻞﺑﺎﻛصﺎﺧﻚﺑ،ﻲﻜﻠﻓﻖﻘﺤﺗ40ﺖﺑﺎﺠﻴﺟﻲﻓﺔﻴﻧﺎﺜﻟا،نﻮﻜﻴﺳﻞﺑﺎﻜﻟاﺐﺳﺎﻨﻤﻟا:ﺎﻣإ
l
ﻰﺘﺣ0.8ﺮﺘﻣﻲﺒﻠﺳ
l
ﺎﻣﻞﺼﻳﻰﻟإ2ﺮﺘﻣ.ﻂﺸﻧ
Cambrionix recommend using cables certified by Intel® , all cables with the Thunderbolt™ logo
should have certification.
Please note that USB specifications require a minimum 100 mA charge current to be delivered
during data transfer. As indicated in above, if the attached device has a BC1.2 compliant CDP
port, the device can draw up to 3أwhile transferring data.
4.5.Registration
You may register your product at www.cambrionix.com/product-registration
4.6.Help and Support
FAQs and help can be found on the Help page here
l
www.cambrionix.com/help_pages/help.
You can raise a support ticket for more in depth support here
l
https://cambrionix.atlassian.net/servicedesk/customer/portals
You can also download any of our manuals and keep up to date at the link here

TS3-C10ﺔﺤﻔﺻ10ﻦﻣ36
l
www.cambrionix.com/product-user-manuals
When contacting support it will be helpful to supply us with the product information for the
hub in question. This can be found on the Device Information Plate which is either on the
underside or back of the unit. Including serial and POnumbers can help identify the product in
question faster and speed up the process.

TS3-C10ﺔﺤﻔﺻ11ﻦﻣ36
5.Using your TS3-C10
In this section you can find information information on how to use your hub in a charge only or
a charge and sync application. You can also find information on managing your hub and
changing port modes, connecting multiple hubs to one host and using Cambrionix Software.
5.0.1LED Configuration
Your TS3-C10 has inbuilt LEDs used to show the state of the ports or devices. These LEDs can be
configured to support your own use case, this can be controlled either by using the APIto send
commands directly or through separate software.
The default LED behaviour of the hub is below.
ColourBehaviour
BlueDevice connected and port is on
RedDevice has reached charged threshold
5.1.Using without connecting to host
When the Hub is switched on and is not connected to a local host computer it is
automatically configured to charge devices using its intelligent charging algorithm. Simply
connect the devices to be charged to any of the available ports (not the Host Port) using
USB - compliant cables.
Once the devices are connected, the algorithm will detect the highest charge rate allowable for
each attached device. Charging at the optimum rate (up to 3أ(specified by the manufacturer
will commence once profiling is complete. Depending on the state of charge of the device
attached, this may take tens of seconds.
5.2.Using when connected to host

TS3-C10ﺔﺤﻔﺻ12ﻦﻣ36
5.2.1Connecting the Hub to a host computer
ﻚﻨﻜﻤﻳماﺪﺨﺘﺳاﺬﻔﻨﻣThunderbolt™ﻒﻴﻀﻤﻟاﻲﻓءﺰﺠﻟاﻲﻔﻠﺨﻟاﻦﻣﺔﺣﻮﻟﻞﺻﻮﻟالﺎﺼﺗﻼﻟمﺎﻈﻨﻟﺎﺑﻒﻴﻀﻤﻟا
صﺎﺨﻟاﻚﺑ،كﺎﻨﻫوﻦﻳﺬﻔﻨﻣﻲﻓﻒﻠﺨﻟاﻰﺘﺣﻦﻜﻤﺘﺗﻦﻣماﺪﺨﺘﺳاﺬﻔﻨﻣﺪﺣاوﻞﻴﺻﻮﺘﻟﻒﻴﻀﻤﻟاﺬﻔﻨﻤﻟاوﺮﺧﻵاﻂﺑﺮﻟ
ةﺪﻋتﺎﺣﻮﻟﻞﺻو.ﺎًﻌﻣ
5.2.2ﺾﻳﻮﻔﺗThunderbolt ™ hubsﻰﻠﻋLinux®
ﻊﻣﺔﻤﻈﻧأLinux®،ﻦﻣيروﺮﻀﻟاﺺﻴﺧﺮﺗ/ﻞﻴﺠﺴﺗﻒﻠﻣTS3-C10ﻞﺒﻗنأ.ﻞﺼﺘﻳ
مﺎﻴﻘﻠﻟﻚﻟﺬﺑ،جﺎﺘﺤﺘﺳﻰﻟإماﺪﺨﺘﺳا"boltctl"يﺬﻟامﺪﺨﺘﺴﻳﻢﻜﺤﺘﻠﻟﻲﻓﺮﻳﺪﻣزﺎﻬﺟThunderbolt ™. "boltctl"
ﻲﻫﺔﻬﺟاوﺮﻄﺳﺮﻣاوﻷاﻞﻋﺎﻔﺘﻠﻟﻊﻣboltd،ﺞﻣﺎﻧﺮﺒﻟاﻲﻔﺨﻟاﻲﻓمﺎﻈﻨﻟايﺬﻟاﺮﻳﺪﻳةﺰﻬﺟأThunderbolt ™ 3.™
ماﺪﺨﺘﺳﺎﺑ"boltctl"،ﻞﺧدأﺮﻣاوﻷاﺔﻴﻟﺎﺘﻟاﺺﻴﺧﺮﺘﻟﻞﻴﺠﺴﺗوﻒﻠﻣTS3-C10.
ةﻮﻗ-]t|-ﻲﻧاﻮﺛ[ﺔﻠﻬﻤﻟا
ﻢﻗﻞﻴﻐﺸﺘﺑةﺪﺣوﻢﻜﺤﺗThunderbolt.™اذإﻢﻟﻦﻜﺗةﺪﺣوﻢﻜﺤﺗThunderbolt™ﻲﻓ"ﺔﻴﻠﺻأ"
ﻊﺿوداﺪﻌﺘﻟاﻦﻜﻤﻳ"فﺎﻘﻳإﻪﻠﻴﻐﺸﺗﻞﻣﺎﻜﻟﺎﺑﺔﻄﺳاﻮﺑﺞﻣاﺮﺒﻟاﺔﺘﺑﺎﺜﻟا/BIOS.ﻒﻴﻀﻤﻠﻟﻰﻠﻋ
ﺔﻤﻈﻧﻷاﺔﻣﻮﻋﺪﻤﻟاكﺎﻨﻫﺔﻬﺟاو"ضﺮﻔﻟ"ةﺪﺣوﻢﻜﺤﺗThunderbolt.™اذإ
ﻢﻋداﺬﻫﺮﻣﻷاﺐﻠﻄﻴﺳﻦﻣﺞﻣﺎﻧﺮﺒﻟاﻲﻔﺨﻟامﺎﻴﻘﻟا.ﻚﻟﺬﺑﺞﻣﺎﻧﺮﺒﻟاﻲﻔﺨﻟاﻊﺒﺘﺘﻴﺳﻞﻛءﻲﺷ
ﺐﻠﻄﻳﻞﻴﻤﻌﻟارﺮﺤﻴﺳوةﻮﻗزوﺎﺠﺗةﻮﻘﻟاﺎﻣﺪﻨﻋنﻮﻜﻳﺐﻠﻄﻟاﺮﻴﺧﻷا
.رﺪﺻ
ﺾﻳﻮﻔﺗDEVICE
ﻞﻳﻮﺨﺗزﺎﻬﺟﺮﻴﻏحﺮﺼﻣﻪﺑﺎًﻴﻟﺎﺣﻢﺗهﺪﻳﺪﺤﺗﺮﺒﻋﻪﻓﺮﻌﻣﺪﻳﺮﻔﻟا)uuid) DEVICE.اذانﺎﻛ
ﻢﺘﻳﻦﻳﺰﺨﺗحﺎﺘﻔﻤﻟاﻲﻓةﺪﻋﺎﻗتﺎﻧﺎﻴﺒﻟاﻲﺘﻟاﻢﺘﻴﺳﺎﻬﻣاﺪﺨﺘﺳا،ﺮﻈﻨﻟﺎﺑﻰﻟإىﻮﺘﺴﻣنﺎﻣألﺎﺠﻤﻟا
ﻢﻋﺪﻳلﺎﺼﺗازﺎﻬﺠﻟا.ﻦﻣﻵامﺪﺨﺘﺳاﺔﻤﺋﺎﻗboltctlﺔﻓﺮﻌﻤﻟuuid.زﺎﻬﺠﻠﻟ
ﻞﻴﺠﺴﺗ-]ﺔﺳﺎﻴﺴﻟا[ﺔﻴﺿاﺮﺘﻓﻻاDEVICE
ﻞﻳﻮﺨﺗﻞﻴﺠﺴﺗوزﺎﻬﺠﻟافﺮﻌﻤﻟﺎﺑﺪﻳﺮﻔﻟاDEVICEﻲﻓةﺪﻋﺎﻗ.تﺎﻧﺎﻴﺒﻟااذإنﺎﻛلﺎﺠﻤﻟا
ﻢﻋﺪﻳلﺎﺼﺗﻻاﻦﻣﻵا،ﻢﺘﻴﺳءﺎﺸﻧإحﺎﺘﻔﻣﺪﻳﺪﺟﻪﻨﻳﺰﺨﺗوﻲﻓةﺪﻋﺎﻗتﺎﻧﺎﻴﺒﻟا
ﺐﻧﺎﺠﺑﻢﺳازﺎﻬﺠﻟاﻢﺳاو.ﻊﺋﺎﺒﻟاحﺎﺘﻔﻤﻟا،اذإﻢﺗهؤﺎﺸﻧإ،ﻢﺘﻴﺳﻪﻣاﺪﺨﺘﺳاﻲﻓﻞﺒﻘﺘﺴﻤﻟا
ﺾﻳﻮﻔﺘﻟزﺎﻬﺠﻟاﻞﻜﺸﺑ.ﻦﻣآ
5.2.3Charging
When the Host Port is connected to a local computer, the hub defaults to Sync mode and
charge currents are determined according to USB Implementers Forum (USBIF) Super-Speed
USB3 specifications. If the attached device complies with USB-IF Battery Charging
specification BC1.2 and supports Charging Downstream Port (CDP), the hub can provide

TS3-C10ﺔﺤﻔﺻ13ﻦﻣ36
high-speed charging at up to 3أ.If the connected device does not comply with BC1.2, the
charge current will be limited to 900ﻲﻠﻠﻣﺮﻴﺒﻣأin compliance with USB specifications.
If you wish to limit the charging to your devices whilst connected to your host system then you
can disable CDPon all ports by inputting the following commands.
The CLI commands for turning off the sync charg options, with a 1 or 0 per port.
settings_unlock
settings_reset
settings_set sync_chrg 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
settings_set alt_sync_chrg 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
reboot
This can also be done via the API if this is easier. Just supply that string (joined with \n) like:
cbrxapi.cbrx_connection_set(handle, "Settings", "settings_unlock\nsettings_reset\nsettings_
set sync_chrg 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0\nsettings_set alt_sync_chrg 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0\nreboot("
Note that settings_reset clears any previous settings, so if you need to retain something else, it
would be better to issue settings_display first, which gives you the entire settings which you
can then modify and re-issue in entirity.
5.2.4Data Transfer
If you wish to transfer data, change applications, restore or update your mobile device, a data
connection to a local host computer is required. The hub is compatible with macOS®,
Windows™ and Linux® operating systems and can transfer data between these operating
systems and many mobile operating systems such as iOS™ and Android.™
In order to transfer data, connect the host port to your local (host) computer using a
Thunderbolt ™ 3 compliant cable. Any devices connected to the hub will now appear as if they
were connected to the host computer’s USB port.
ﻞﻘﻨﻟتﺎﻧﺎﻴﺒﻟا،ﻢﻗﻞﻴﺻﻮﺘﺑﺬﻔﻨﻣThunderbolt™ﺮﺗﻮﻴﺒﻤﻜﻠﻟﻲﻠﺤﻤﻟا(ﻒﻴﻀﻤﻟا)ﺪﺣﺄﺑﺬﻓﺎﻨﻣThunderbolt™
ةدﻮﺟﻮﻤﻟاﻰﻠﻋءﺰﺠﻟاﻲﻔﻠﺨﻟاﻦﻣرﻮﺤﻤﻟاماﺪﺨﺘﺳﺎﺑﻞﺑﺎﻛﻖﻓاﻮﺘﻣﻊﻣThunderbolt ™ 3.ﻦﻜﻤﻳﺎًﻀﻳأماﺪﺨﺘﺳاﻞﺒﻛ
Thunderbolt ™ 2ﻊﻣلﻮﺤﻣThunderbolt ™ 2-3تﺎﻋﺮﺴﺑﻞﻘﻧتﺎﻧﺎﻴﺑ.ﺔﻀﻔﺨﻨﻣﺮﻬﻈﺘﺳنﻵايأةﺰﻬﺟأﺔﻠﺼﺘﻣ
ﺔﺣﻮﻠﺑﻞﺻﻮﻟاﺎﻤﻛﻮﻟﺖﻧﺎﻛﺔﻠﺼﺘﻣﺬﻔﻨﻤﺑUSBﺮﺗﻮﻴﺒﻤﻜﻠﻟ.ﻒﻴﻀﻤﻟارﻮﺤﻤﻟاﻖﻓاﻮﺘﻣﺎًﻣﺎﻤﺗﻊﻣSuperSpeed USB3.2
ﻪﻨﻜﻤﻳوﺮﻴﻓﻮﺗتﺎﻋﺮﺳﻞﻘﻧتﺎﻧﺎﻴﺑﻞﺼﺗﻰﻟإ5ﺖﺑﺎﺠﻴﺟﻲﻓﺔﻴﻧﺎﺜﻟاﻞﻜﻟ.ﺬﻔﻨﻣأقرزأءﻲﻀﻴﺳﺮﺷﺆﻣLEDقﻮﻓﻞﻛ
ﺬﻔﻨﻣﺪﻨﻋ.ﺔﻨﻣاﺰﻤﻟاﻚﻨﻜﻤﻳماﺪﺨﺘﺳاﺞﻣﺎﻧﺮﺒﻟايﺬﻟاهرﺎﺘﺨﺗﻞﻘﻨﻟتﺎﻧﺎﻴﺒﻟاﻦﻣﻰﻟإو.كزﺎﻬﺟ

TS3-C10ﺔﺤﻔﺻ14ﻦﻣ36
5.2.5ﺔﻬﺟاولﺎﺼﺗﻻالﻮﻛﻮﺗوﺮﺒﻟاو
لاTS3-C10ﺮﻬﻈﻳﺬﻔﻨﻤﻛﻲﻠﺴﻠﺴﺗﻲﺿاﺮﺘﻓاﻰﻤﺴﻳ)ﺎًﻀﻳأUARTوأVCP.(ﻲﻓMicrosoft ™ Windows،ﺮﻬﻈﻴﺳ
مﺎﻈﻨﻟاﺬﻔﻨﻤﻛCOM.ﻰﻠﻋmacOS®،ﻢﺘﻳءﺎﺸﻧإﻒﻠﻣزﺎﻬﺟﻲﻓﻞﻴﻟﺪﻟا./اﺬﻫﻦﻣﻞﻜﺸﻟا/dev/tty.usbserial Sﺚﻴﺣ
Sةرﺎﺒﻋﻦﻋﺔﻠﺴﻠﺳﺔﻴﻠﺴﻠﺴﺗﺔﻳﺪﺠﺑأﺔﻴﻤﻗرةﺪﻳﺮﻓﻞﻜﻟ.زﺎﻬﺟ
ﻦﻤﻀﺘﺗةﺰﻬﺟﻷالﻮﺤﻣFT230X USBﻰﻟإUART ICﻦﻣFTDI International.ﻲﻓمﺎﻈﻧﻞﻴﻐﺸﺘﻟاWindows 7وأ
ثﺪﺣﻷا،ﺪﻗﻢﺘﻳﺖﻴﺒﺜﺗﺞﻣﺎﻧﺮﺑﻞﻴﻐﺸﺘﻟاﺎًﻴﺋﺎﻘﻠﺗاذإ)ﻢﺗﻦﻳﻮﻜﺗWindowsﻞﻳﺰﻨﺘﻟﺞﻣاﺮﺑﻞﻴﻐﺸﺘﻟاﻦﻣﺖﻧﺮﺘﻧﻹا.(ﺎًﻴﺋﺎﻘﻠﺗ
اذإﻢﻟﻦﻜﻳﺮﻣﻷاﻚﻟﺬﻛ،وأاذإﻢﺗماﺪﺨﺘﺳامﺎﻈﻧﻞﻴﻐﺸﺘﻟاMac®وأLinux®،ﻦﻜﻤﻴﻓﻞﻳﺰﻨﺗﺞﻣﺎﻧﺮﺑﻞﻴﻐﺸﺘﻟاﻦﻣ
www.ftdichip.com.ﺞﻣاﺮﺑﻞﻴﻐﺸﺗVCP.ﺔﺑﻮﻠﻄﻣﺔﺒﺴﻨﻟﺎﺑةﺰﻬﺟﻷﺮﺗﻮﻴﺒﻤﻛLinux®وأMac،ﺐﺠﻳماﺪﺨﺘﺳاﺞﻣاﺮﺑ
ﻞﻴﻐﺸﺗمﺎﻈﻧﻞﻴﻐﺸﺘﻟا.ﺔﻴﺿاﺮﺘﻓﻻا
ﺐﺠﻳﻦﻴﻴﻌﺗتاداﺪﻋإتﻻﺎﺼﺗﻻاﺔﻴﺿاﺮﺘﻓﻻاﻰﻠﻋ115200دوﺎﺑ،و8تﺎﺘﺑتﺎﻧﺎﻴﺑ،نوﺪﺑوﻞﺛﺎﻤﺗ،ﺖﺑوﻒﻗﻮﺗ.ﺪﺣاو
رﺎﺸﻳﻰﻟإاﺬﻫﺎًﻧﺎﻴﺣأـﺑ115200،8،N، 1.ﻻﻢﺘﻳماﺪﺨﺘﺳاﻢﻜﺤﺘﻟاﻲﻓ.ﻖﻓﺪﺘﻟاﺐﺠﻳﺪﻳﺪﺤﺗةﺎﻫﺎﻀﻣفﺮﻃANSI

TS3-C10ﺔﺤﻔﺻ15ﻦﻣ36
5.3.Scalability
يﻮﺘﺤﺗتاﺪﺣوﻢﻜﺤﺗUSBﻞﻜﺸﺑمﺎﻋﻰﻠﻋﺪﺣﺔﻄﻘﻨﻟﺔﻳﺎﻬﻨﻟا،ﺎﻤﻣﺪﺤﻳﻦﻣدﺪﻋةﺰﻬﺟﻷاﻲﺘﻟاﻦﻜﻤﻳﺎﻫداﺪﻌﺗﺪﻨﻋ
لﺎﺼﺗﻻاﺬﻔﻨﻤﺑUSB3صﺎﺨﻟازﺎﻬﺠﺑﺮﺗﻮﻴﺒﻤﻛ.ﻲﻠﺤﻣﻒﻴﻀﻣﺬﻔﻨﻣUSB3 xHCI
دﺪﺤﺗتاﺪﺣوﻢﻜﺤﺘﻟاﻲﻓﻢﻈﻌﻣةﺰﻬﺟأﺮﺗﻮﻴﺒﻤﻜﻟادﺪﻋطﺎﻘﻧﺔﻳﺎﻬﻨﻟاﻲﺘﻟاﻦﻜﻤﻳﺎﻫداﺪﻌﺗﻦﻴﺑ64و128.ﺪﻌُﺗةﺰﻬﺟﻷا
ﺔﻟﻮﻤﺤﻤﻟاﺮﺜﻛأﻦﻣﺔﻄﻘﻧﺔﻳﺎﻬﻧةﺪﺣاو،ﺎًﺒﻟﺎﻏوﺎﻣﻢﺘﻳداﺪﻌﺗةﺰﻬﺟﻷاةﺪﻘﻌﻤﻟاةدوﺰﻤﻟاتﺎﺣﻮﻠﺑﻞﻤﻌﺗﺲﻤﻠﻟﺎﺑﻲﻓﻞﻜﺷ5
وأ6طﺎﻘﻧ.ﺔﻳﺎﻬﻧﻲﻟﺎﺘﻟﺎﺑو،نﺈﻓدﺪﻋةﺰﻬﺟﻷاﻲﺘﻟاﻦﻜﻤﻳﺎﻫداﺪﻌﺗحﺎﺠﻨﺑﺮﺼﺘﻘﻳًةدﺎﻋﻰﻠﻋﻞﻗأﻦﻣ.ﻦﻳﺮﺸﻋ
By using Thunderbolt™ connectivity and incorporating host controllers inside the hub each port
can handle up to 16 endpoints.اذإﺖﻨﻛﺐﻏﺮﺗﻲﻓﺔﻨﻣاﺰﻣﺪﻳﺰﻤﻟاﻦﻣةﺰﻬﺟﻷا،ﻦﻜﻤﻴﻓﻂﺑرﺪﻳﺪﻌﻟاﻦﻣروﺎﺤﻤﻟا
ﻞﺴﻠﺴﺘﺑيﺰﻳدحﺎﻤﺴﻠﻟﺎﻤﺑﻞﺼﻳﻰﻟإ60ةﺰﻬﺟأﻦﻜﻤﻳﺎﻬﺗرادإﻦﻣﺮﺗﻮﻴﺒﻤﻛﻒﻴﻀﻣﺪﺣاوﻲﻓﺲﻔﻧ.ﺖﻗﻮﻟا
ﻦﻣﻞﺟأﺔﻠﺴﻠﺳيﺰﻳدةدﺪﻌﺘﻣروﺎﺤﻤﻟا،ﺐﺠﻳﻞﻴﺻﻮﺗﻞﻛرﻮﺤﻣﺔﻗﺎﻄﻟﺎﺑﺔﻴﺴﻴﺋﺮﻟاindividually and the first hub
in the chain should be connected to the local computer through one of the Thunderbolt™ ports.
The next hub in the daisy-chain is then connected using one of its Thunderbolt™ ports to the
remaining Thunderbolt™ port of the first hub. A third, fourth and fifth hub can be added in the
same way, connecting the available Thunderbolt™ port of theprevious hub to one of the
Thunderbolt™ ports of the next device in the daisy-chain.ماﺪﺨﺘﺳﺎﺑاﺬﻫﺞﻬﻨﻟا،ﻦﻜﻤﻳﻂﺑرﺔﺘﺳروﺎﺤﻣ
ﺪﺤﻛﻰﺼﻗأﺎًﻌﻣ،ﺎﻤﻣﺢﻤﺴﻳﻲﻟﺎﻤﺟﺈﺑ60ةﺰﻬﺟﻷاداﺮﻤﻟاﺎﻬﺘﻨﻣاﺰﻣﻦﻣزﺎﻬﺟﺮﺗﻮﻴﺒﻤﻛﻒﻴﻀﻣ.ﺪﺣاو

TS3-C10ﺔﺤﻔﺻ16ﻦﻣ36
5.4.Manage Ports & Your TS3-C10
Each port on your TS3-C10 can be managed either individually or all together. You can turn the
ports off and on, change the port mode or change the charging profiles. This can be done either
through LiveViewer or by connecting to the hub via the API.
5.4.1Port Modes
Sync
Turn specific ports or the whole hub to sync mode (data and power
channels open(
Off
Turn specific ports on or off or switch the whole hub on or off. (no
power and no data channels open(
5.4.2Charging Profiles
To ensure attached devices charge at their optimum rate, our smart USB hubs come with the
below intelligent charging profiles built in:
1900mA
21.5A
33A
5.4.3Firmware
The firmware can be kept up to date using our LiveViewer software. As part of delivering an
easy user experience our LiveViewer application is now a set-and-forget solution. The
LiveViewer application will find out what firmware your USB hub has and present an update for
you, ready to just hit install.
To update the firmware first go to the firmware updater section of LiveViewer. Here you can
see the available Firmware versions available to download and install to the hub. To download
a firmware file click on the version under the "downloadable firmware updates" section. once
downloaded it will appear in the "Available firmware files" section.
The current firmware version on the hub is displayed in the firmware updater section alongside
the hubs name. This will appear red if a newer version is available or green if it is the most up to
date.

TS3-C10ﺔﺤﻔﺻ17ﻦﻣ36
To install the firmware onto the hub simply click the hub/ hubs connected that you want to
update and then select the firmware version you want to upgrade to. Once selected press the
update button at the top and the update will commence.
رﺬﺤﻟا
Your Cambrionix Firmware may get corrupted
lDo not interrupt the Firmware update process
lDo not disconnect the power during the update process

TS3-C10ﺔﺤﻔﺻ18ﻦﻣ36
5.5.Software
ﺪﻳﺰﻤﻟاﻦﻣﺔﻴﺟﺎﺘﻧﻹا،ﺎﻤﻣﺮﻓﻮﻳﻚﻟ.ﺖﻗﻮﻟاﺮﻓﻮﻳCambrionixثﻼﺛتﺎﻬﺟاوﻦﻜﻤﻳﻦﻣﺎﻬﻟﻼﺧﺔﺒﻗاﺮﻣةرادإوHub:
•LiveViewer
•ﺔﻬﺟاوﺔﺠﻣﺮﺑتﺎﻘﻴﺒﻄﺗCambrionix
•تﺎﻤﻴﻠﻌﺗﺮﻄﺳﺮﻣاوﻷا
The TS3-C10 uses string commands to communicate with the host system. These can be sent
via the virtual serial port of the TS3-C10 directly, or the API can be used to provide other
protocols that sends translated string commands. LiveViewer can use the API to interact with
the devices through a user friendly application.
There are three different channels for both our LiveViewer application and the API. The three
channels are Alpha/ Beta and Release. We would recommend using the release version of both
the APIand LiveViewer.
We will push bug fixes and any updates through Alpha and then onto Beta before it is merged
into the Release version. If you have found a bug that we have a fix for, the Alpha and Beta
releases may already have addressed these and implemented fixes.
5.5.1Installing-Software
Cambrionix has 2 pieces of software which can be used to manage the devices and your hub
using different host systems. In this section we have instructions and information on using our
software on 3 of the most popular host systems.
Our software is available to download from www.cambrionix.com/software, you will find
software available for Windows™, Mac® and Linux® Systems.
To install on Mac® and Windows™ systems download the install files from the above link, once
downloaded run the install process and dialogue boxes will appear to help you through
installation and initial set up.
For Linux® systems download the install files from the website at the above link. Once
downloaded, you can either install it from the desktop GUI, or from the command line via:
sudo apt install/.

TS3-C10ﺔﺤﻔﺻ19ﻦﻣ36
after this command you will need to enter the file name that has just been downloaded from
our website.
5.5.2LiveViewer
LiveViewer is an Application that can be downloaded from
www.cambrionix.com/products/liveviewer . Once downloaded and installed on the host
computer, LiveViewer allows you to switch the ports on and off, set the port to charge only, or
to sync mode. LiveViewer’s home page shows the following information about all the ports:
•Status (attached/disconnected(
•Mode (Charge/Sync/Off(
•Profile (Charging profile(
•Duration (how long the device has been attached(
•End time (time the battery reaches a threshold (full) level(
•Current (instantaneous charge current in mA(
•Energy (present energy rate(
Tick boxes adjacent to each port symbol allow that port mode to be changed. When the port is
in Sync mode, only instantaneous current can be monitored through LiveViewer. When the port
is in Charge mode, the charge profile, instantaneous current, energy rate, duration of charge
and end time are displayed. In addition to individual port information and control, LiveViewer
displays the hub rail voltages, time since switched on, total instantaneous current and power,
and temperature. Further information on LiveViewer is available on our website.
تاداﺪﻋإNVRAM
ﺪﺟﻮﻳﻞﺧادرﻮﺤﻤﻟاصﺎﺨﻟاﻚﺑﺾﻌﺑتاداﺪﻋﻹاةدﺪﺤﻤﻟاﻲﺘﻟاﻦﻜﻤﻳﻢﻜﺤﺘﻟاﺎﻬﻴﻓﻰﻤﺴﺗمﺪﻋ"دﻮﺟوتاداﺪﻋإةﺮﻛاذ
لﻮﺻﻮﻟاﻲﺋاﻮﺸﻌﻟا"ةﺮﻴﻐﺘﻤﻟاﻲﺘﻟاورﺎﺸﻳﺎﻬﻴﻟإﻢﺳﺎﺑتاداﺪﻋإNVRAM.ﻢﻜﺤﺘﻳءﻻﺆﻫﻲﻓﺔﻋﻮﻤﺠﻣﺔﻋﻮﻨﺘﻣﻦﻣ
تاداﺪﻋﻹاﺔﻔﻠﺘﺨﻤﻟاﻰﻠﻋTS3-C10.
ﻚﻨﻜﻤﻳلﺎﻘﺘﻧﻻاﻰﻟإتاداﺪﻋإNVRAMﻦﻋﻖﻳﺮﻃﺢﺘﻓLiveViewerرﺎﻴﺘﺧاوHubيﺬﻟاﺪﻳﺮﺗلﺎﺼﺗﻻا.ﻪﺑدﺮﺠﻤﺑ
رﺎﻴﺘﺧاﺔﺣﻮﻟﻞﺻﻮﻟاﺔﻠﺼﺘﻤﻟا،ﻞﻘﺘﻧاﻰﻟإﺔﻧﻮﻘﻳﻷاهﺎﻧدأﻲﻓﻰﻠﻋأﻦﻴﻤﻳﺔﺷﺎﺸﻟاﻦﻣLiveViewerﺮﻘﻧاوقﻮﻓ
Advanced.