CAME BPT XTS 7 WH WIFI User manual

Wifi touch-screen speaker video-intercom
XTS 7 WH WIFI
XTS 7 BK WIFI
XTS 7 WH WFBF
USER MANUAL
EN
English
FB01263-EN

4
2
1
3
Page 2- Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
1Signaling LED
2Speaker
3Touch screen display
4Microphone.
DESCRIPTION
Full-touch speaker video intercom for the X1 system.
Description of parts
GENERAL PRECAUTIONS
• Carefully read the instructions before using the device.
• The installation, programming, commissioning and maintenance of the product must only be carried out by
qualified technicians, properly trained in compliance with the regulations in force, including health and safety
measures and the disposal of packaging.
• Use this equipment solely for the its specifically intended purpose.
• The manufacturer declines all liability for any damage as a result of improper, incorrect or unreasonable use.
Maintenance and precautions when using the device
• Do not expose the LCD screen to direct sunlight.
• To clean, only use soft, dry, or slightly-moistened cloth rags. Do not use any chemicals.
• Do not block the air vents.

O
B C GF H I
E
D
A
N
M
J
KL
Page 3- Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
HomeBackInfo
Call register
Contacts
Aux List
Entry panels
Video Recording
Favourites
19:02 Thursday
01 Feb 2018
ACommand to exclude call ringer; when the com-
mand is active, the red LED is lit.
BThe red LED means that the device's ringer is
turned off
CThe blinking blue LED, when the screen is stand-
ing by, means that there are unseen messages or
missed calls
DTurns the answering service off or on
ETurn the automatic door opener on or off
This icon appears only if the automatic door
opener function is properly set up.
FThe blinking icon means there are unseen mes-
sages or missed calls
GThe grey icon means that the device is enabled
for connecting to CAMEConnect; the white icon
means that the device is connected to CAMECon-
nect.
HThe white icon means that the device is working
properly and is ready to take any calls
IThe icon means that the Wifi connection is active
and strong
JThis button appears on all screens and is for re-
turning to the homepage
KThis button appears on all screens and is for re-
turning to the previous page
LThis button appears on all screens and is for ac-
cessing the information pages
MThis activates the preset auxiliary command
NPreset door opener command
OSOS button: pressed for at least 5 seconds, it
sends a "panic" alarm signal to the default porter,
showing the number of the calling extension.
This button is featured in systems that require
a concierge service.
Commands and notifications found on the home page
The appearance of the homepage may vary according to the system configuration or the user interface.

Page 4- Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Call from Entry Panel
An image of the caller appears on the screen. The audio from and towards the caller is turned o.
ATouch the button to answer the call and to turn on the audio communication.
BTouch the button to refute the call and to return to the homepage.
Options appearing on the screen during a conversation
CCall duration.
DCaller's ID.
Commands that are active during a conversation
EIt turns on the electric lock of the shown entry panel.
FThis opens the list of auxiliary commands configured for the shown entry panel; touch the name of the com-
mand that you want to send.
GIt is used to adjust the audio volume of the conversation in progress.
HIt turns o the microphone (mute function).
ITouch the button the start audio/video recording the current conversation.
A red light signal blinks next to the caller's ID during the recording.
The recording is automatically ended after 10 seconds.
JIt is used to access to a list of CCTV cameras that can be viewed.
Select the camera you want to view; the audio and the door opener and auxiliary controls remain open to and from
the calling entry panel.
KTouch and drag the image on the screen (or press the > arrow) to view the listed entry panel or analog video
camera (if one is installed); the current audio/video call is ended.
HOW TO USE THE DEVICE
Answering a call
B
E
C
F
D
G
H
I
J
K
A

1
2
3
Page 5- Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Concierge
Main Call
Intercom 2 Not home
Main Call
Intercom 1 Not home
App 01 Call Mario's phone
App 02 Lucia's phone number
Home
App 01 Mario's phone number
Home
Home
Home
Back
Back
Info
Info
Call register
Contacts
Aux List
Entry panels
Video Recording
Favourites
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
When communication is underway,
certain commands and information
appear on the screen, as men-
tioned before in the "Answering a
call" chapter on page 4.
Select one of the listed contacts to
initiate a call.
Touch the icon to view con-
tact's details.
Touch the icon to remove the
contact form the list of favorites.
Calling a contact on the
favorites list
ATouch the icon to access the list
of favorite contacts.
To fill the list of favorite con-
tacts, see the chapter called
"Contacts" on page 7.
Making a call
This device lets you call other indoor receivers (intercommunication), any devices connected over the Wifi network
or, any entry panels.
A

1
2
3
Page 6- Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Secondary entry panel
Main entry panel
Home
Home
Back
Back
Info
Info
Call register
Contacts
Aux List
Entry panels
Video Recording
Favourites
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
When communication is underway,
certain commands and information
appear on the screen, as men-
tioned before in the "Answering a
call" chapter on page 4.
Select the entry panel to initiate a
call.
This opens the door associated
to the entry panel without initiating
a call.
Opens a pop-up containing a
list of auxiliary commands associ-
ated to the entry panel.
Touch the icon to view con-
tact's details.
Touch the icon to remove the
contact form the list of favorites.
Turn on communication to
entry panel
BTouch the icon to access the list
of entry panels.
To fill the list of entry panels,
see the "Contacts" chapter on
page 7.
B

1
2
Page 7- Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Intercom 5
Intercom 4
Intercom 3
Intercom 2
Intercom 1
Entry panel
Unit
Home
Home
Back
Back
Info
Info
Call register
Contacts
Aux List
Entry panels
Video Recording
Favourites
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
Commands associated with contacts
Opens the door associated to the entry panel.
Opens a pop-up containing a list of auxiliary commands associated to the entry panel.
Adds/removes the selected to and from the favorites list.
Adds/removes the selected to and from the entry panels list.
Types of contact
Residential unit
Single User
Concierge
Entry panel
Analog video camera
Touch one of the listed items to access the window for viewing details on the selected contact and to customize
his or her name.
The list contains all the devices that
can be contacted.
Touch the icon to access the con-
tacts list.
Contacts

3
4
5
6
Page 8- Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Home
Home
Back
Back
Info
Info
App 04
App 03
Mobile App 4
Mobile App 3
App 02
Mobile App 2
App 01
Mobile App 1
EXTENSIONS
EXTENSIONS
XTS receiver
XTS receiver
Unit
Intercom 1
Entry panel
Unit
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
Touch the icon to edit the con-
tact's name.
Touch the icon to add the con-
tact to the list of favorites.
Touch the Back button to return to
the previous screen.
Unit
AResidential unit (includes the
indoor receiver and any associated
apps).
BThe indoor receiver.
CPossible users connected to the
system via app, either locally or
from a remote location.
Touch one of the contacts to initiate
a call.
Intercom.
FIntercom contact.
Touch the contact to initiate the
call.
Touch the icon to edit the
contact's name.
Entry panel
DEntry panel.
ECommands associated to an
entry panel.
Touch the contact to initiate the
call.
Touch the icon to edit the
contact's name.
B
D
F
E
A
C

7
1
2
Page 9- Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Delete all
Entry panel
Entry panel
01 Jan 2018 23:55
10s
03 Jan 2018 17:33
10s
04 Jan 2018 21:03
10s
Entry panel
Concierge
Home
Home
Back
Back
Info
Info
Call register
Contacts
Aux List
Entry panels
Video Recording
Favourites
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
ATouch the icon the turn the an-
swering service on or off.
To properly set up the an-
swering service, see the "Video
answering service" chapter on
page 15.
BThe number with the red back-
ground is the number of unseen
video messages.
When the screen standing-by,
any unseen video messages, are
flagged by the blinking, blue LED
fitted on the frame.
Any unseen messages are high-
lighted.
Touch the wanted message to start
its playback.
Touch the icon to remove the
message from the list.
Touch the Back button to return to
the previous screen.
Video Recording
Concierge
GConcierge panel, if the system
features this.
Touch the contact to initiate the
call.
Touch the icon to edit the
contact's name.
G
A
B

1
2
1
Page 10 - Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Light
Entry panel
Gate
Entry panel
HomeBackInfo
Call register
Contacts
Aux List
Entry panels
Video Recording
Favourites
Home
Home
Back
Back
Info
Info
Call register
Contacts
Aux List
Entry panels
Video Recording
Favourites
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
Touch the name of the wanted
command to activate its corre-
sponding contact.
Touch the icon to edit the
command name.
Touch the Back button to return to
the previous screen.
ATouch the icon to access the call
history.
BThe number with the red back-
ground is the number of missed
calls.
When the screen standing-by, any
missed calls are flagged by the
blinking, blue LED fitted on the
frame.
Call register
ATouch the icon to access the list
of auxiliary contacts.
The auxiliary commands (AUX) let
you activate suitably programmed
contacts to carry out additional
commands to the classic opening
of the entry door.
To fill the list of auxiliary con-
tacts, see the chapter called "Aux
settings (auxiliary commands)"
on page 13.
Aux List
A
A
B

2
1
2
Page 11 - Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
message from the list.
Touch the Back button to return to the previous screen.
Delete all
30 Jan 2017 15:45
0s
03 Jan 2018 16:31
0s
05 Jan 2018 14:21
0s
07 Jan 2018 21:03
0s
28 Jan 2018 11:23
0s
29 Jan 2018 19:55
0s
CONCIERGE
Intercom 1
Entry panel
Entry panel
Entry panel
Entry panel
Home
Home
Home
Back
Back
Back
Info
Info
Info
Settings
IP 04 Video cameraIP 03 Video camera
IP 02 Video cameraIP 01 Video camera
CCTV
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
Select the IP video camera that you
want to view.
ATouch the icon to access the list
of available video cameras.
Types of calls
Incoming call.
Outgoing call.
Missed call.
Any missed calls are highlighted .
Touch the line you want to call your
contact.
Touch the icon to start the
saved message playback.
Touch the icon to remove the
CCTV

Page 12 - Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
HomeBack
Save
Info
EnglishLanguage
19:02 Thursday
01 Feb 2018
SettingsCCTV
Home
Home
Back
Back
Info
Info
IP video cameras
Auxiliary setting
Video Recording
Quick commands
Date/time
Language
System information
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
Choose the device interface lan-
guage from the drop-down menu.
Save the setting by touching the
Save button.
Language
This window gives technical infor-
mation that is useful for identifying
the device's characteristics and the
hardware and software versions.
System information
Touch the icon to return to the list
of settings.
GENERAL SETTINGS

1
Page 13 - Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Delete all
New Aux
State/City
Continent
01 Feb 2018 19:02
Date/Time
NTP server
Auto mode
Mode
HomeBack
NTP
Auto
System
Manual
Save
Info
19:02 Thursday
01 Feb 2018
This window is for setting the date
and time on the indoor receiver.
A The date and time are manually
set by the user.
B Date and time are synchronized
automatically.
The network to which the de-
vice is connected must be able to
access the internet.
Choosing mode B, you can specify the source of the automatic date and time.
CIn this space provide the NTP server address through which the device will synchronize the date and time.
DWhen the manual mode is activated (A), the pop-up window lets you manually set the current date and time.
ESelect from the following lists, continent - state/city where the system is installed, for a correct management
of the time zone and the summer time.
Save the setting by touching the Save button.
Touch the Back button to return to the list of configurable parameters.
Date/time
The list is empty
HomeBackInfo
19:02 Thursday
01 Feb 2018
A Touch the button to add a new
auxiliary command.
Aux settings (auxiliary commands)
A
C
D
E
A B

2
3
Page 14 - Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Preset Aux command
HomeBackInfo
19:02 Thursday
01 Feb 2018
Entry panelDestination
Aux 3Command
Gate opener
Garden lights
Entry panel
Gate opener
Entry panel
Description
Delete all
New Aux
Home
Home
Back
Back
Save
Info
Info
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
This window is for establishing
which of the previously configured
commands needs to be executed
by pressing the Aux button on the
homepage.
A From the list select the wanted
auxiliary command.
Touch the Back button to return to
the list of configurable parameters.
Quick commands
The auxiliary commands will fill the
list.
For editing the selected ele-
ment.
For eliminating the selected
element.
Touch the Back button to return to
the list of configurable parameters.
B Touch the area to assign a name
to the AUX command that you are
going to add.
C Choose the command to asso-
ciate the AUX to, from the list.
Save the setting by touching the
Save button.
B
C
A

1
Page 15 - Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Delete all
New video camera
The list is empty
HomeBackInfo
19:02 Thursday
01 Feb 2018
Save
5 seriesAnswer delay
Courtesy message Off
Play message
Record message
On
HomeBackInfo
19:02 Thursday
01 Feb 2018
A From the drop down menu, se-
lect the ring time - expressed in
seconds - after which the automat-
ic recording is activated.
B Enable the courtesy message to
be played back.
C Button for recording and playing
back the courtesy message.
Save the setting by touching the
Save button.
Touch the Back button to return to
the list of configurable parameters.
Video Recording
If the system has a video intercom entry panel installed, if the called user is not in, the device lets the caller record
a video message.
The caller may be notified of this by a courtesy message, for example, "The user is not available at the moment,
please leave a message after the beep".
The video message, labelled with the time and date of the call, are stored. You can view it later by consulting video
voicemail.
A Touch the button to add a new
IP video camera.
IP video cameras
B
A
C
A

3
2
Page 16 - Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
URI for the xed image
URI for live connection
Description
HomeBack
Save
Info
19:02 Thursday
01 Feb 2018
B Touch the area to assign a name
to the IP video camera that you are
going to add.
C Touch the area and type the
URI string for connecting the video
camera.
D Touch the area and type the URI
string for acquiring the static image
from the video camera, needed for
the preview.
The URI strings are indicated
in the IP cameras manual.
Save the setting by touching the
Save button.
Delete all
New IP video camera
IP 04 Video camera
IP 03 Video camera
IP 02 Video camera
IP 01 Video camera
HomeBackInfo
19:02 Thursday
01 Feb 2018
The added IP video cameras fill the
list.
For editing the selected ele-
ment.
For eliminating the selected
element.
Touch the Back button to return to
the list of configurable parameters.
B
C
D

Page 17 - Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Brightness in stand-by
Touch sound
Local doorbell tone
Ringing tone
Volume
Brightness
Clean screen
Home
Home
Back
Back
Info
Info
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
Background
HomeBackInfo
19:02 Thursday
01 Feb 2018
D With this function enabled, each touch on the screen is accompanied by a sound.
Touch the Back button to return to the list of configurable parameters.
A Adjusts the brightness of the
screen during use.
B Adjusts the brightness of the
screen saver when the screen is in
stand-by mode.
C This makes the screen insensi-
tive to the touch for 20 seconds, to
enable cleaning over it.
Touch the Back button to return to
the list of configurable parameters.
A It adjusts the general volume of
the ringers for the video intercom
calls.
B Choose the tone to associate to
incoming calls from the drop-down
menu.
C From the drop down menu se-
lect the tone to associate to the call
from the landing.
Tones
Display
Select your preferred backdrop;;
the new configuration is applied
immediately.
Touch the Back button to return to
the list of configurable parameters.
Backdrops
A
B
C
A
B
C
D

2
1
Page 18 - Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Quick commands
Video recording
Manual programming
Send SN
Multimedia
Backdrops
Conguration X2
CAME Connect
IP video cameras
Network
Conguring the user interface
Advanced settings
Automatic door opener
Tones
Credentials
Display
Home
Home
Home
Back
Back
Back
Info
Info
Info
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
This section requires specific
know-how in operating the vid-
eo-intercom system. Wrong set-
tings may cause partial or even
total malfunctions; that is why
the editing of some parameters
is allowed only after entering the
installer password; the default
password is 112233).
Advanced settings
Accessing the list of advanced set-
tings.
Select the first item on the list.
A This button is for sending the
SN (serial number) to the Pcs/Xip
software during the programming
steps.
B This button takes you to manual
programming of the device.
The complete manual pro-
gramming procedure for the call
is printed in the literature that is
issued with the indoor receivers.
Configuration X2
A
B

1
2
Page 19 - Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
DHCP
DHCP
YES
YES
Congure WiFi
Congure WiFi
Save
Save
Static
NO
NO
Address MAC
DNS
Gateway
Netmask
Netmask
IP address
IP address
Mode
Mode
Enabled
Enabled
WiFi
WiFi
Type of connection
Type of connection
Home
Home
Back
Back
Info
Info
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
CThis button is for enabling WiFi
communication.
This icon shows that the WiFi
connection is active, enabling the
network-settings sections below.
DLets you choose the type of ad-
dress from:
DHCP
The device's IP address is as-
signed by the DHCP server; if
there are no special needs, this
mode lets you continue with the
settings without adding any ad-
ditional data.
IOnce you have chosen the
connection mode, the button is
for selecting and setting up a Wifi
network.
Every 30 seconds the device scans
for available networks.
Static
The device's IP address is manually assigned.
EIf you have chosen a static IP address, enter the device's IP, which must belong to the same subnet as that of
the router and of the other connected devices.
FIf the netmask is dierent from the default one, provide the proper netmask.
GProvide the default gateway for your network.
HEnter a valid DNS address to have the CAMEConnect connection (for example, 8.8.8.8.).
If a DHCP server is also present, the static address selected must not be among those included in the
DHCP pool.
For devices configured as a Master it is advisable to assign a static IP address. Instead if the address is
generated by a DHCP server, check that the IP address is assigned on the basis of the MAC ADDRESS of the
device or that the lease time is very high.
Network
C
D
E
F
G
H
I

4
3
Page 20 - Manual FB01263 -EN - 12/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Translation of the original instructions
Smith home WiFi
Protected
Public WiFi
Unprotected
Save
YES NO
None
Connect
Status
Password
Internet service provider
Encryption
Enable connection
Security
Hidden network
Keycode
SSID
Save setting
Scan
Add WiFi network
Home
Home
Home
Back
Back
Back
Info
Info
Info
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
19:02 Thursday
01 Feb 2018
3The page shows the detected
networks; to manually scan for net-
works, touch the Jbutton.
Select a network to connect to.
If the network is unprotected the
connection will be immediate.
If the network is protected, enter
the password for the WiFi network
to get access.
Press button Lto save the con-
figuration
To connect to a WiFi network with a
hidden SSID, touch this button K.
On the page provided yo can enter
an SSID, that is, network name,
type of security, encryption and
password; when required.
To connect, touch this button M.
Press button Lto save the con-
figuration
CURL of the service for remote calls (the default one is xip01.cameconnect.net)
DIt shows the state of the connection.
ADevice's univocal code.
BFor enabling or disabling the
VoIP remote control of the video-in-
tercom call.
The factory settings require that the
connection to CAME Connect be
enabled.
The CAME Connect connec-
tion must be active to receive
calls over the App.
CAME Connect
A
B
C
D
M
J
K
L