Canon Compact Power Adapter'CA-PS700
Important Usage Instructions
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Important
Warning
.H·,·OlIN.
IRISK
OF
ELECTRIC SHOCK I
DO NOT OPEN
CAUTION:
TO
REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER·SERVICEABLE PARTS INSIDE. REFER
SERVICING
TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within
an
equilateral
&triangle,
is
intended to alert the user to the presence
of
~
un
insulated "dangerous voltage" within the product's enclosure,
/that
may
be
of
sufficient magnitude
to
constitute arisk of electric
shock to persons.
6
The
exclamation point, within
an
equilateral triangle,
is
intended
to
Ialert the user to the presence
of
important operating
and
•maintenance (servicing) instructions
in
the literature
accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
14.
lightning
-For added protection
of
this product during alightning storm, or when it is
left unattended and unused for long periods
of
time, disconnect it from the wall outlet
and disconnect the antenna. This will prevent damage to the product
due
to lightning
and power-line surges.
15. Overloading -Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.
16. Objects and Liquid Entry -Never push objects of any kind into this product through
openings as they may touch dangerous voltage pomts or
short
out parts that could
result in afire or eiectric shock. Be careful not to spill liquid of
any
kind
onto
the
product.
17. Servicing -Do not attempt to service thiS product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
18. Damage Requiring Service -Disconnect this product from the wall outlet and all
power sources including battery, and refer servicing to qualified service personnel
under the following conditions:
a.
When the power-supply cord or plug is damaged.
b.
If
any liquid has been spilled onto,
or
objects have fallen into, the product.
c.
If the product has been exposed to rain
or
water.
d.
If the product does
not
operate normally even if you follow the operating
instructions. Adjust only those controls that are covered by the operation
Instructions. Improper adjustment of other controls may result in damage and will
often require extensive work by aqualified technician to restore the product to its
normal operation.
e.
If
the product has been dropped
or
the cabinet has been damaged.
f.
When the product exhibits adistinct change in pertormance. This indicates aneed
for service.
19. Replacement Parts -When replacement parts are required, be sure the service
technician has used replacement parts that are specified by Canon or that have the
same characteristics as the anginal part. Unauthorized substitutions may result in fire,
electric shock or other hazards.
20. Safety Check -Upon completion of any service or repairs to this product, ask the
service technician to pertorm safety checks to determine that the product is in safe
operating order.
In
these safety instructions the word
"prodUCt'"
refers to the Compact Power Adapter
CA-PS700.
1.
Read Instructions -All the satety and operating Instructions should be read before the
product
IS
operated.
2.
Retain Instructions -
The
safety and operating Instructions should be retained
fOI
future reference.
0.
Heed Warnings -All warnings on the product and
'n
the operating instructions should
be adhered to.
4.
Follow Instructions -All operating and maintenance Instrucfions shouid be followed.
5.
Cleaning -Unplug
thiS
product from the wall outlet before cleaning. Do not use liquid
or aerosol cleaners. The product should be cleaned only as recommended in this
manual.
6.
Accessories -Do not use accessories not recommended
in
this manual as they may
be hazardous.
7.
Avoid magnetic or electriC fields -Do not use the camera close to TV transmitters,
portable communication devices or other sources
of
electric or magnetic radiation.
They
may cause picture Interterence, or permanently damage fhe camera.
8.
Water and Moisture -Hazard of electriC shock -Do not use thiS product near water
or
In
rainy/moist situations.
9.
Placing or Moving -Do not place on an unstable cart, stand, tripod,
~
bracket or table.
The
product may fall, causing serious injury to achild or
adult, and serious damage to the product. •
~
Aproduct and cart combination should be moved with care. Ouick stops,
:"!
excessive force, and uneven surfaces may cause the product and cart
combination to overturn.
1
O.
Power Sources -
The
product should be operated only from the type of power source
indicated on the marking label.
If
you are not sure of the type of power supply
to
your
home, consult your product dealer or local power company. Regarding other power
sources such as battery power. refer to instructions
in
this manual.
11. Polarization
--
The product
IS
eqUipped with apolarized 2-prong plug (a plug having
one blade wider than the other).
The 2-prong polarized plug will fit Into the power outlet only one way. ThiS
is
asafety
feature.
If
you are unable to Insert the plug fUlly Into the outlet, try reversing the plug.
If
the plug still fails to fit, contact your electriCian to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
12. Power Cord
Protection-
Power cords should be routed so that they are not likely
to
be walked on or pinched by items placed upon or against them. Pay particular attention
to plugs and the pOint from which the cords exit the product.
13. Outdoor Antenna Grounding -If an outside antenna
IS
connected to the product, be
sure the antenna is grounded so as to provide some protection against voltage surges
and built-up static charges. Section 810 of the National Electrical Code, ANSI /NFPA
No.
70-1984,
provides Information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode. See figure
1.
Fig. 1
EXM_~PlE
Of' AIHEN.NA
GROUNDING'5
PER
f!A1!ON~L
ELECTRIC/,L CODE
The adapter can be used with apower supply between 100 and 240 V
AC.
For areas where 120 V
AC
power is not used, you will need aspecial
plug adapter. Contact your nearest Canon service center for further information.
When the replacement of power supply
is
required, please return
it
to the responsible nearest Canon Service Center, and please repiace it with the
same type number CA-PS700 or equivalent.
DC
P.IU9..
.-kJ
"
.•
"
~~
~../"
~
....
0"
Fernte
core--~
,
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF
PLUG TO WIDE SLOT, FULLY INSERT.
CDI-E035-01C1201 Ni2.5 ©
2001
CANON INC. PRINTED
IN
JAPAN
IMPRIME
AU
JAPaN
