Canon PIXMA MG3120 User manual

Installing Your Multifunction to
Additional Computers on Your Network
PIXMA MG3120
Windows OS
1
<< Previous Next >>

Installing Your Multifunction to
Additional Computers on Your Network
PIXMA MG3120
Windows OS
Preparing to Connect My Multifunction To My Network 3
Network Requirements 3
Notes on Wireless Connection 4
Using the Machine from Additional Computers 5
2
<< Previous Next >>

3
Preparing to Connect My Multifunction
To My Network
Network Requirements
Before connecting the machine to the network, make sure that configuration of the computer and access point or router is
complete, and that the computer is connected to the network.
Wireless Connection
Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that
configuration of the computer and access point or router is complete.
<< Previous Next >>

4
Preparing to Connect My Multifunction
To My Network << Previous Next >>
4
Notes on Network Connection
•The configuration, router functions, setup procedures and security settings of
the network device vary depending on your system environment. For details,
refer to your device's instruction manual or contact its manufacturer.
•In an office setup, consult your network administrator
•If you connect to a network that is not protected with security measures, there
is a risk of disclosing data such as your personal information to a third party.
•If an error message appears or if you have trouble with the network
connection, refer to the printed manual: Network Setup Troubleshooting.
•Place the machine and computer on the same network segment.
An "Ad-hoc connection," which establishes a direct wireless connection between
the computer and printer without using an access point, is not supported.
A router or access point is required for your printer to be used on a wireless
network.

Using the Machine from Additional Computers
5
Software Installation
If the machine is already connected to a wireless connection, it can be used from additional computers on the same network.
To use from additional computers
IMPORTANT
•Log on as the administrator (or a member of the Administrators group).
•Quit all running applications before installation.
•If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access
the network. If such a warning message appears, set the security software to always allow access.
<< Previous Next >>

Using the Machine from Additional Computers
6
<< Previous Next >>
Installing the PIXMA MG3120 on Additional Computers
If your printer is already set up on your network, and you wish to use the printer from additional computers, you only need to install the printer software
on the other computers. There are no further settings that need to be performed on the printer, and the printer does not have to be connected with the
USB cable.
A step-by-step walk through of the wireless setup is built in to the installation routine of the software that shipped with your PIXMA.
*Insert the Setup CD-ROM that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions.
*If you don’t have or cannot use the Setup CD-ROM, you can still install the printer using a downloaded file. Click here for information.
Be sure to select Wireless Connection on the Connection Method Selection screen (1-2).
Follow any on-screen instructions until the Completion of Connection screen (1-4) appears. This is shown on the next page.

Using the Machine from Additional Computers
7
<< Previous Next >>
Connection is confirmed automatically if the printer has already been set up on the network. Click Next on the Completion of
Connection screen (1-4)

Installing the Drivers & Software
8
<< Previous Next >>
On the Software Installation List select any additional* software to install and click Next.
*MP Drivers is required for installation and cannot be deselected. In addition, we recommend installing MP Navigator EX and Easy-
PhotoPrint EX in order to take full advantage of your printer’s features.
*If you are using the downloaded ‘Mini Master setup’ file to install the printer, only the MP Drivers will be installed. Additional software
can be downloaded separately. The software can be found in the Software section of Drivers & Software (the same page where you
downloaded the Mini Master setup file)

Installing the Drivers & Software
9
<< Previous Next >>
The drivers and software will begin to install.
When the Detected Printers List appears, verify that the ‘MG3100 series’ is listed, then click Next.

Installing the Drivers & Software
10
<< Previous Next >>
Click Complete on the Setup Completion screen
Continue to follow any on-screen instructions to complete and exit the setup.