Canon imageclass MF244DW User manual

FT6-1696 (000)
Getting Started IMPORTANT For Mac OS users,
please refer to P.13 En
Mise en route IMPORTANT Si vous utilisez Mac OS,
reportez-vous à la P.27 Fr
Introducción IMPORTANTE Para usuarios de Mac OS,
consulte la pág.41 Es
Introdução IMPORTANTE Para usuários de Mac OS,
por favor consulte a pág.55 Pt
You can access http://canon.com/oip-manual to
read the User’s Guide that describes all functions
of this machine.

2
Installing the Machine
Installation Requirements
15 3/8"
(390 mm)
12 1/4"
(312 mm)
12 1/4"
(310 mm)
5"
(128 mm)
14 1/4"
(362 mm)
●MF232w
14 1/4"
(360 mm)
10 5/8"
(270 mm)
1 1/2"
(39 mm)
4 1/4"
(106 mm)
15 3/8"
(390 mm)
5”
(128 mm)
14 1/4"
(362 mm)
●MF244dw

3
Remove all the tape.
1
2

4
Installing the Machine
1
2
1
2
1
2

5
1
2

6
Índice
Contenido
Table des matières
Contents
About the Manuals .......................................................................8
Navigating the Menu and Text Input Method ....................8
Connecting the Power Cord and Turning ON
the Power .........................................................................................8
Specifying the Initial Settings...................................................9
Choosing the Method to Connect the Machine ................9
Choosing the Method to Connect:
Via Wireless LAN or Other Method..........................................9
Connecting via a Wired LAN................................................... 10
Connecting via a USB Cable ................................................... 10
Connecting via a Wireless LAN.............................................. 10
Setting Wireless LAN ................................................................. 11
Setting a Paper Size and Type................................................ 13
Perform Useful Tasks ................................................................. 14
Replacing Toner Cartridge ...................................................... 15
Clearing Paper Jams.................................................................. 16
A propos des manuels.............................................................. 22
Navigation dans le menu et méthode de saisie du
texte ................................................................................................ 22
Branchement du cordon d’alimentation et mise sous
tension............................................................................................ 22
Conguration des réglages initiaux .................................... 23
Choix de la méthode de connexion de la machine ....... 23
Choix de la méthode de connexion de la machine:
Méthode via réseau sans l ou autre................................... 23
Connexion via un réseau laire............................................. 24
Connexion via un câbleUSB................................................... 24
Connexion via un réseau sans l........................................... 24
Conguration du réseau sans l ........................................... 25
Réglage du format et du type de papier............................ 27
Procédures utiles........................................................................ 28
Remplacement de la cartouche d’encre ............................ 29
Résolution des bourrages papier ......................................... 30
Acerca de los manuales............................................................ 36
Navegación por el menú y método de introducción
de texto.......................................................................................... 36
Conexión del cable de alimentación y encendido del
interruptor de alimentación................................................... 36
Especicación de la conguración inicial.......................... 37
Selección del método de conexión del equipo............... 37
Selección del método de conexión: a través de red
LAN inalámbrica u otro método ........................................... 37
Conexión mediante una red LAN cableada...................... 38
Conexión con un cable USB.................................................... 38
Conexión mediante una red LAN inalámbrica................. 38
Conguración de LAN inalámbrica...................................... 39
Ajuste del tamaño y el tipo del papel.................................41
Tareas útiles.................................................................................. 42
Sustitución del cartucho de tóner........................................ 43
Eliminación de atascos de papel ..........................................44
Sobre os manuais....................................................................... 50
Navegação pelo menu e pelo método de entrada de
texto................................................................................................ 50
Como conectar o cabo de alimentação e ligar a
máquina......................................................................................... 50
Especicação das congurações iniciais............................ 51
Escolha do método de conexão da máquina................... 51
Escolher o Método para Conectar:
Através de LAN sem o ou outro método......................... 51
Conexão via LAN com o......................................................... 52
Conexão via cabo USB.............................................................. 52
Conexão via LAN sem o......................................................... 52
Congurações da LAN Sem Fio............................................. 53
Conguração do tamanho e do tipo de papel................ 55
Tarefas úteis.................................................................................. 56
Substituição do cartucho de toner...................................... 57
Eliminação de obstruções de papel..................................... 58
* For Mac OS users, please refer to P.13
* Si vous utilisez Mac OS, reportez-vous à la P.27
* Para usuarios de Mac OS, consulte la pág.41
* Para usuários de Mac OS, por favor consulte a pág.55

7

8
En
Navigating the Menu and Text Input Method About the Manuals
Getting Started (This manual):
Read this manual rst. This manual
describes the installation of the
machine, the settings, and a caution. Be
sure to read this manual before using
the machine.
MF Driver Installation Guide (Visit
the website):
This manual describes software
installation.
You can access
http://canon.com/oip-manual to
read the User’s Guide that describes
all functions of this machine.
User’s Guide (Visit the website):
You can access
http://canon.com/oip-manual to
read the User’s Guide that describes
all functions of this machine.
Navigating the Menu
Item selection or moving the cursor
among the menu items
Select an item with [▲] or [▼].
Proceed to the next hierarchy with
or [▶]. Return to the previous hierarchy
with or [◀].
Setting conrmation
Press . However, when <Apply>
appears on the display, select <Apply>,
and then press .
Text Input Method
Changing entry mode
Press [▼] to select <Entry Mode>, and
then press . You can also press to
change the entry mode.
Entry mode Available text
<A> Uppercase alphabetic letters and
symbols
<a> Lowercase alphabetic letters and
symbols
<12> Numbers
Entering text, symbols, and numbers
Enter with the numeric keys or .
Moving the cursor (Entering a space)
Move with [◀] or [▶]. Move the cursor
to the end of the text and press [▶] to
enter a space.
Deleting characters
Delete with . Pressing and holding
deletes all characters.
Entry mode:
<A>
Entry mode:
<a>
Entry mode:
<12>
@ . - _ / 1
ABC abc 2
DEF def 3
GHI ghi 4
JKL jkl 5
MNO mno 6
PQRS pqrs 7
TUV tuv 8
WXYZ wxyz 9
(Not available) 0
(space) - . * # !“ , ; : ^ ` _ = / |‘
? $ @ % & + \ ˜ ( ) [ ] { } < > (Not available)
Connecting the Power Cord and Turning ON the Power
1
2
OFF ON
Do not connect the USB cable at this time. Connect it when installing software.
▲▼◀▶OK Back
Menu #Clear Numeric keys

9
En
Specifying the Initial Settings
Follow the instructions on the screen, set the language, region,
time zone, and date and time. For details on navigating the
menu and how to input the numbers, see“Navigating the
Menu and Text Input Method” ( P.8).
Language
Chinese (Simplified)
Chinese (Traditional
English
French
Current Time Set.
08/08/2014 12:52 AM
(0:00-12:59)
Choosing the Method to Connect the
Machine
●Connecting via a Wired LAN
You can connect the machine to a wired router. Use the LAN
cables to connect the machine to the wired router (access
point).
Connect the computer to the router by cable or wirelessly.
Make sure that there is an available port in the router to connect
the machine and the computer.
Have a LAN Cable of Category 5 twisted-pair cable or higher ready.
●Connecting via a USB cable
You can connect the machine to the computer using a USB
cable.
Make sure that the USB cable you use has the following
mark.
●Connecting via a Wireless LAN
You can connect the machine to a wireless router*. Since it
is wirelessly connected, no LAN cables are needed.
* A wireless router (access point) that supports IEEE802.11b/g/n is
required.
Connect the computer to the router by cable or wirelessly.
Check if your router has a button
Select from the following two methods depending on the
router (access point) that you are using.
●There is a button.
You can easily setup if your router (access point)
has a button, and if the mark is on the router.
●There is no button.
If there is no button on your router (access point),
manually select your SSID and complete the settings.
NOTE
• If you are looking to install your new device via a
Wireless Network connection, you can nd a video and
written guides with step-by-step instruction to assist
you through the process from the following URL:
http://www.usa.canon.com/WirelessHelp
Viewing these guides will ensure a smooth setup of the
device into your existing wireless environment.
●Direct Connection
Connect a mobile device to the machine wirelessly and
directly without routing through a wireless LAN router (or
access point).
User’s Guide“Can Be Used Conveniently with a Mobile
Device”▶“Make Direct Connection (Access Point Mode)”
Choosing the Method to Connect:
Via Wireless LAN or Other Method
Use wireless LAN to
connect to network?
(Can config. later.)
Yes No
Current Time Set.
Must rechg. battery
for 24 hours to save
time settings. After
turning main power
Yes
There is a button.
Start from step 4 of ”Push Button Mode”(P.11).
There is no button.
Start from step 4 of ”Setting the Access Point
Manually”(P.12).
No
Connect to the computer via a wired LAN
Proceed to “Connecting via a Wired LAN”(P.10).
Connect to the computer via a USB cable
Proceed to “Connecting via a USB Cable”(P.10).
Connect to the computer via a wireless LAN later
Proceed to “Connecting via a Wireless LAN”(P.10).

10
En
Connecting via a Wired LAN
Checking Before the Setup
Internet Router
or
hub
LAN cable
Are the computer and the router (or hub) properly
connected using a LAN cable?
For more information, see the instruction manual for the
network device you are using, or contact the networking
device manufacturer.
Have the network settings on the computer been
completed?
If the computer is not properly congured, you may not be
able to use the wired LAN connection even after completing
the following settings.
NOTE
• You cannot connect both the wired LAN and wireless
LAN at the same time. In addition, the machine is set to
the“Wired LAN”by default.
• When you connect to a network environment that is not
security protected, your personal information could be
disclosed to third parties. Please use caution.
• If you connect through a LAN in the oce, contact your
network administrator.
Connecting via a Wired LAN
1
Connect the LAN cable.
The IP address will be automatically congured in 2
minutes. If you want to set the IP address manually, see
the following items.
User’s Guide“Network” ▶“Connecting to a Network” ▶
“Setting IP Addresses”
2
Install the driver and software using the provided
DVD-ROM.
See “For details on the installation procedures:”(P.13).
Proceed to “Setting a Paper Size and Type”(P.13).
Connecting via a USB Cable
Install the Driver and Software
Install the driver and software on the provided DVD-ROM.
See “For details on the installation procedures:”(P.13).
Proceed to “Setting a Paper Size and Type”(P.13).
NOTE
• If you connected the USB cable before installing, rst
remove the USB cable and then re-install.
Connecting via a USB Cable
Follow the MF Driver Installation Guide to connect the USB
cable.
Proceed to “Setting a Paper Size and Type”(P.13).
Connecting via a Wireless LAN
Checking Before the Setup
Wireless LAN Router
Internet
Is the computer connected to the router (access point)
correctly by a LAN cable or wireless LAN?
For more information, see the instruction manual for the
network device you are using, or contact the networking
device manufacturer.
Have the network settings on the computer been
completed?
If the computer is not properly congured, you may not be
able to use the wireless LAN connection even after completing
the following settings.