Canon INSPIC S User manual

Instant Camera Printer
User Manual

CONTENTS
SAFETY INFORMATION
SPECIFICATIONS
INSTALLING THE APP
USER INTERFACE
Home Screen
Main Menu
Smartphone Camera
Photo Gallery
Printing Photos
Editing Photos
Using Tile Print
Using Collage Print
Sharing Photos
Saving Photos
Send to Mini Print App
PAIRING MOBILE DEVICE
& INSTANT CAMERA PRINTER
Android Pairing
iOS Pairing
Android Pairing (with NFC)
OVERVIEW
Supplied Items
Product Features
SETUP
Charge
Load Paper
External Memory
OPERATION
Power ON/OFF
Taking A Photo
Viewfinder
Selfie Mirror
Flash and Fill Light
Aspect Ratio
Printing and Reprint
Remote Shooting
Camera Voice
LED Indicator
Troubelshooting
P3
P16
P17-18
P24-33
P19-23
P4
P5-8
P9-15

SAFETY INFORMATION
3
READ BEFORE USE
Please read the following instructions and safety precautions before using the
device.
For regulatory and additional safety information, refer to the Regulation and
Warranty Information sheet included in your package contents.
RMN: PP2001
Regulatory Model Identification Number is assigned for regulatory identification
purpose.
• Keep away from children and infants. Improper use of this product may cause
suffocation or accident.
• Stop using the device immediately if it emits smoke or a strange smell, or
otherwise behaves abnormally.
• Do not look at the sun or bright lights through the viewfinder or the lens.
Blindness or vision problems could result.
• Do not fire the flash near the eyes. It may hurt the eyes.
• A strap wound around a child’s neck may result in asphyxiation. If your product
uses a power cord, mistakenly winding the cord around a child’s neck may
result in asphyxiation.
• Turn the device off in places where camera use is prohibited. The
electromagnetic waves emitted by the camera may interfere with the operation
of electronic instruments and other devices. Exercise adequate caution when
using the product in places where use of electronic devices is restricted, such
as inside airplanes and medical facilities.
• When operating in extreme weather, the device might not print. Let the printer
temperature adjust to the recommended operating temperature of 15º to 32ºC,
before attempting to print again.
• When charging, please charge the device at the recommended temperature of
15º to 32ºC.
• Use a soft dry cloth to clean the device. Do not clean with a damp cloth or
volatile liquids such as paint thinner.
• Keep the top cover closed to avoid dust and other particles from entering the
inside of the device.
• If the device is not functioning properly, please contact the dealer you purchased
this product from or Canon Service & Support at https://asia.canon/en/consumer/buy.
• Never expose the battery to high temperatures, direct heat, or dispose by
incineration.
• Electromagnetic interference or electrostatic discharge may cause the device to
malfunction or the memory to be lost or altered. Should this occur, use a pin, or
similar item to press the [RESET] button at the bottom of the device.
WARNING
CAUTION

OVERVIEW
ZINK
Paper
4
SUPPLIED ITEMS
PRODUCT FEATURES
Instant Camera Printer Quick Start Guide USB Cable Wrist StrapRegulation and
Warranty
Information sheet
Camera Lens
Selfie Mirror
Fill Light (8 LEDs)
Print Output Slot
Strap Hole
Flash
Status LED
Slide Switch (Off / Auto / Fill Light)
Power Button
Shutter Button
• Keep away from children and infants. Improper use of this product may cause
suffocation or accident.
• Stop using the device immediately if it emits smoke or a strange smell, or
otherwise behaves abnormally.
• Do not look at the sun or bright lights through the viewfinder or the lens.
Blindness or vision problems could result.
• Do not fire the flash near the eyes. It may hurt the eyes.
• A strap wound around a child’s neck may result in asphyxiation. If your product
uses a power cord, mistakenly winding the cord around a child’s neck may
result in asphyxiation.
• Turn the device off in places where camera use is prohibited. The
electromagnetic waves emitted by the camera may interfere with the operation
of electronic instruments and other devices. Exercise adequate caution when
using the product in places where use of electronic devices is restricted, such
as inside airplanes and medical facilities.
• When operating in extreme weather, the device might not print. Let the printer
temperature adjust to the recommended operating temperature of 15º to 32ºC,
before attempting to print again.
• When charging, please charge the device at the recommended temperature of
15º to 32ºC.
• Use a soft dry cloth to clean the device. Do not clean with a damp cloth or
volatile liquids such as paint thinner.
• Keep the top cover closed to avoid dust and other particles from entering the
inside of the device.
• If the device is not functioning properly, please contact the dealer you purchased
this product from or Canon Service & Support at https://asia.canon/en/consumer/buy.
• Never expose the battery to high temperatures, direct heat, or dispose by
incineration.
• Electromagnetic interference or electrostatic discharge may cause the device to
malfunction or the memory to be lost or altered. Should this occur, use a pin, or
similar item to press the [RESET] button at the bottom of the device.
1
1
4
4
5
5
5
6
6
7
7
3
3
2
2
9
9
10
10
11
8
8
Viewfinder
Speaker
Printer Cover
Aspect Ratio Button
Reprint Button
Micro USB Port
Charging Status LED
MicroSD Card Slot (up to 256GB)
Reset Button
11
13
14
15
16
17
18
19
12
13
14 15
16
17
18
19
12
CANON ZINK™
Photo Paper
(10 sheets)
* To reset the device, press with a pin

SETUP
5
CHARGING
The device has a built-in battery. Please fully charge the device via the USB
cable provided before using.
HANDLE THE USB CABLE WITH CARE WHILE CHARGING
• Do not place any heavy objects on top of the cable.
• Do not place the USB cable near heat.
• Do not scratch, damage, twist or pull hard on the cable.
• Do not plug or unplug the cable with wet hands.
• Avoid too high/too low temperature or humid conditions.
• Please unplug the USB cable from power source after charging.
• Please use the supplied USB cable for charging.
About USB Cable
Charging Status LED
Insert the smaller end of the supplied USB cable into the device and other
end into a chargeable USB adapter.
The charging LED light will turn red to indicate charging.
Once fully charged, the charging LED will turn green.
−Operating time may vary depending on the battery status, operational
status and environment conditions.
1
3
2
Charging : Red
Full : Green
NOTE

6
LOAD PAPER
Remove the cover by sliding it forward in the direction of the arrow.
1
Open a single pouch of photo paper (10 sheets + blue SMART SHEET™).
3
2
Place all 10 photo paper sheets and the one SMART SHEET™ into the photo
paper compartment.
−Stack the photo paper on top of the blue SMART SHEET™, making sure
the blue barcode and the photo paper logos are facing down.
4Place the top cover back onto the device. It should click into place when
closed properly.
−The blue SMART SHEET™ will be sent through the device automatically
before the first print.

7
EXTERNAL MEMORY
An external MicroSD card (up to 256 GB) is needed for saving captured
photos. Only FAT16, FAT32 and exFAT format are supported.
• Use and keep the device in the recommended environment of 59º to 90º F
(15º to 32º C) and 40-55% relative humidity.
• Keep your device firmware up-to-date. To check if your firmware needs to be
upgraded, open the Canon Mini Print app, go to the Main Menu > Settings >
Printers, select your device and enter to Product Info, then tap "Firmware
Upgrade".
−Make sure your mobile device has a internet connection before checking. If
you need to upgrade the firmware, your printer must be charged to 50% or
higher.
• Make sure you’re using the latest Canon Mini Print app version. If your apps
don’t automatically update, go to app store and check if you need to update.
MAINTAINING THE DEVICE
Use the following memory cards (sold separately)
• MicroSD memory cards *1
• MicroSDHC memory cards *1 *2
• MicroSDXC memory cards *1 *2
*1 Cards conforming to SD standards. However, not all memory cards
have been verified to work with the camera.
*2 UHS-I memory cards are also supported.
PREPARING A MEMORY CARD
• Insert the MicroSD card into the slot at the bottom of the device. You will feel
a slight click when the card is fully inserted .
• Push on the top of the card to release it. Gently pull to fully remove the card
from the device.
• If there is an error on reading /writting to the MicroSD card, the FAIL sound
will play once. Remove the MicroSD card and restart the device.
• Connect the device to a computer by USB cable. Double-click the external
drive image when it appears on the computer to view and save the photos.
INSTALL AND REMOVE THE MicroSD CARD
NOTE

8
• Only load 10 ZINK™ photo paper sheets and 1 SMART SHEET™. Do not
load more as it can result in paper jams or printing errors.
• For optimal print results, use ZINK™ photo paper for Inspic S.
−You may purchase additional photo papers within the Canon Mini Print App
by tapping “Buy Paper” in the main menu.
• If there is a paper jam, simply turn the printer OFF and ON to automatically
clear the paper jam. Don’t try to pull the paper out.
• While the device is printing, don’t pull or tug on the photo paper.
• Handle photo paper carefully to avoid damage or bending.
• Keep the photo paper clean when loading. If photo paper is dirty or damaged,
it may result in a paper jam or print error.
• Don’t open a new pouch of photo paper until you are ready to load it into your
device.
• Don’t expose photo paper to direct sunlight or moisture.
• Don’t leave your photo paper in an area where the temperature or humidity is
out of the suggested conditions indicated on the pouch. It may reduce the
quality of the printed photo.
WHEN USING PHOTO PAPER
• Each pouch of photo paper contains 10 sheets of photo paper and 1 blue
SMART SHEET™.
• Load the SMART SHEET™ and photo paper from within the same pouch for
optimal print quality. Each SMART SHEET™ is specifically tuned for the
pouch of paper it is contained in.
• The SMART SHEET™ will be sent through the device automatically before the
first print to clean the printer and optimize print quality for that specific paper
pouch (10 sheets).
• Keep the SMART SHEET™ and only discard after you have printed all 10
sheets of photo paper in the pouch. If print quality is not as expected, you can
reuse the SMART SHEET™ if the paper is still from the same pouch. Simply
slide the SMART SHEET™ with its barcode-side down underneath the
remaining photo paper.
• Using a SMART SHEET™ from another pouch may result in reduced print
quality.
ABOUT THE SMART SHEET™
• Use and keep the device in the recommended environment of 59º to 90º F
(15º to 32º C) and 40-55% relative humidity.
• Keep your device firmware up-to-date. To check if your firmware needs to be
upgraded, open the Canon Mini Print app, go to the Main Menu > Settings >
Printers, select your device and enter to Product Info, then tap "Firmware
Upgrade".
−Make sure your mobile device has a internet connection before checking. If
you need to upgrade the firmware, your printer must be charged to 50% or
higher.
• Make sure you’re using the latest Canon Mini Print app version. If your apps
don’t automatically update, go to app store and check if you need to update.
NOTE

9
OPERATION
POWER ON/OFF
VIEWFINDER
TAKING A PHOTO
2 x 3
Compose an image with the frame mark in the viewfinder.
When the LED indicator turns to a
steady white , the device is ready to
Use.
2
• When the device is idle for about 3 minutes (default), it will automatically
power off. User can resume the device by pressing the Power button again.
• User can change the time ( 3 minutes / 5 minutes / 10 minutes) in the App.
AUTO POWER OFF
30cm- ∞
1Press and hold the Power button
until the LED indicator light turns on.
1Hold the device, confirm the desired
composition of the image.
3Press and hold the Power button to
turn off the device.
Press the Shutter button
to take a photo.
- Half press for focus lock
- Full press to take a photo
2
2 x 3 2 x 2
Outer Frame Mark
for normal shooting
at 1m - ∞
2 X 2 Frame Mark
for normal shooting
at 1m - ∞
Inner Frame Mark
for close up shooting
at 30cm
30cm - ∞

10
SELFIE MIRROR
FLASH AND FILL LIGHT
2 x 3
Focusing distance
at 50cm
Focusing distance
at 50cm
2 x 2
Compose an image with the frame mark in the Selfie Mirror.
When the device is powered on and flash is selected to AUTO, the camera will
automatically trigger the flash if it is necessary for the lighting conditions.
50cm- ∞
FLASH
If you are about to take a selfie, the ring
shape 8 LED Fill Lights around the lens
gives you uniform illumination on your
face. It reduces the level of shadow and
allows you to take beautiful shots of your
face as a whole, and create a uniform
brightness across the entire photo.
FILL LIGHT
* Effective Fill Light Range: 1ft - 2ft

11
• The photo will be printed out immediately after taking the photo.
• The device can hold up to 3 images at a time to print.
• The device can also print photos from your smartphone via the App.
PRINTING A PHOTO
ASPECT RATIO
PRINTING AND REPRINT
When the aspect ratio is 2x2, the blank area of the photo paper is different. It is
based on how the device is held.
When you have captured a
photo and it is printed out, if
you want to duplicate the
same photo or distribute
several pieces of the same
photos in a party, you just
simply press the Reprint
button to reprint the last
printed photo.
REPRINT A PHOTO
User can choose between two aspect
ratios, 2x3 and 2x2 with the Aspect ratio
button .
Aspect ratio can be changed at any time
before taking a photo.

Press to choose between two aspect ratios (2x3 and 2x2).
12
REMOTE SHOOTING
User can remotely control the device through the
App such as taking photos.
Press on the App to enter the Remote
Control Page.
• The Timer LED light around the selfie mirror will alert you if the timer is
enabled.
TIMER
Press to capture a photo instantly. Press and select 3 seconds/
5 seconds/ 10 seconds timer (default: OFF), press to begin the countdown.
ASPECT RATIO

13
CAMERA VOICE
When the camera is connected with a mobile device, the user can customize the
sound effects for “Power On”, “Power Off”, and “Shutter”. User can record 3
sound files (maximum 4 seconds) for each camera voice effect through the App.
Tap in the main menu, go to Settings > Printers, select your device and tap
on ”Camera Voice”.
To start a recording, tap on the desired sound file icon e.g. , and then .
Press for audio playback, and to save and apply the sound effect to the
camera.
Audio 1

14
LED INDICATOR
SMART SHEET™
Error
Processing
SMART SHEET™
Power Off
No Paper
Paper Jam/
Cover Open
Get Ready for
Printing
Printing Photo
MS Mode
(Mass Storage Mode)
MicroSD Card
Error
Temperature
Too High
Temperature
Too Low
Printer Head
Cooling
Standby
Power On
Status Operation LED Indicator
When the device detects wrong
SMART SHEET™ is inserted, or
other SMART SHEET™ error
After the device is powered on
Press and hold Power button
Checking the printer head
temperature and letting it cool
down before printing
White
Off
Magenta
Red (Until temperature
returns to normal)
Cyan (Until temperature
returns to normal)
Yellow > Magenta > Cyan > White
(Looping)
Press and hold Power button
When the device is printing out
SMART SHEET™
When the device has no paper,
the device will not allow for
taking a photo
When there is a paper jam or
the printer cover is opened
Preparing for printing
When the device is printing
a photo
Device is connected to a computer
When device temperature is too hot
Cannot write data into MicroSD Card
When device temperature is too cold
Red
Red
White
Blue
White
Magenta
Cyan
Blue White

15
Low Battery
Very Low Battery
Firmware
Updating
2 x 3
Aspect Ratio
2 x 2
Aspect Ratio
When battery level down to 20%
When the device is updating firmware
When 2x3 aspect ratio is selected,
8LEDs in the fill light will flash once
When 2x3 aspect ratio is selected,
4LEDs in the fill light will flash once
When battery level is very low Red > White (Looping)
White > Red (Looping)
White
Red
N/A
N/A
N/A
N/A
N/A
Red
Red
Red
Magenta
TROUBLESHOOTING
MicroSD Card
Error
Paper Feeding
Failed
Paper Jam
No Paper
Red
Printer Cover
is not closed
properly
Overheat
Connection
Remote
Control Failed
Customized
Sound Failed
Device does
not Work
Take a Photo
Status LED Indication Actions
• Check if the MicroSD card is inserted properly
• Check if the MicroSD card is full
• Check if the MicroSD card is corrupted
• Check if the MicroSD card is compatible
• Wait until the device temperature returns to
normal, the device will resume working again
• Make sure the smartphone bluetooth
connection is properly set up.
• Make sure selection of device on the App is correct
• Make sure smartphone OS is compatible and up to date
• Make sure the device is connected with the App
• Make sure the App and firmware are up to date
• Make sure the device is connected with the App
• Make sure the App and firmware are up to date
• Make sure the device firmware is up to date
• Make sure print queue buffer is available
• Make sure device has Canon ZINK™ photo paper
• Make sure the battery level is not too low.
If it is, recharge the device
• Close the printer cover properly
• Reload Canon ZINK™ photo paper into the
device
• Open the paper compartment cover to check
if Canon ZINK™ photo paper is inserted
• Power off and on the device, the photo paper
will be fed out automatically

16
SPECIFICATIONS
Subject to change without notice
Printing Technology ZINK™
Printing Resolution 314 x 600 dpi (dots per inch)
Printing Speed Approximately 50 seconds - Motor starts and stops,
at room temperature 25º C
Photo Aspect Ratio 2" x 2" or 2" x 3"
Compatible Paper
Canon ZINK™ Photo Paper : ZP-2030-20 (20 sheets) /
ZP-2030-50 (50 sheets) /
2" x 3" / Peel-and-Stick Back
Paper Capacity Up to 10 sheets of ZINK™ photo paper + 1 SMART SHEET™
Photo Resolution 8MP
Focal Length 25.4 mm
Aperture f 2.2
Focusing Range 1ft - ∞
Sensitivity Auto (ISO 100 - 1600)
Flash YES (Auto)
Flash Range 1.6ft - 3.2ft
Memory Card MicroSD Card, up to 256GB
Power Source
Built-in Rechargeable Li-Polymer Battery 700mAh, 7.4V
Charging Speed Approximately 120 minutes (Full Charge)
Power Adapter Output Current : 1A (min) Voltage : 5V
Environmental Parameters - Recommended Printing Operating, Charging, and
Storage Temperature : 15º to 32º C
- Recommended Printing Operating, Charging, and
Storage Humidity : 40-55% RH
- Operating Temperature : 5º to 40º C
- Operating Humidity : < 70% RH
Automatic Power-off 3 minutes / 5 minutes/ 10 minutes (selectable in-app)
Dimension 4.8” (W) x 3.2” (H) x 0.8” (D) /
121mm (W) x 80.3mm (H) x 21.5mm (D)
Weight 6.6 oz / 188 g
Compatible OS Windows 7 / 8 / 8.1 / 10
(for Computer) Mac OSX 10.10 - 10.14
Connectivity Bluetooth 4.0
Compatible OS iOS 9.0 or above & Android 4.4 or above
Mobile Application Canon Mini Print
Connection for Charging USB 2.0 (Micro USB)
and Data Transfer

17
INSTALLING APP
SEARCH FOR "Canon Mini Print" IN APP STORES
OPTION ①
For Android™ - from Google Play™
For iOS® - from the App Store®

18
USING QR CODE - SCAN THE QR CODE ON THE "Quick Start Guide"
OPTION ②
In your device browser GO TO https://app.canonminiprint.com/
OPTION ③
USING NFC For Android ONLY
OPTION ④
For Android For iOS
TAP IT
NFC

19
Android Pairing
Turn on the printer by pressing and holding the Power button until the status
LED light turns on.
Open mobile device "Settings" to enable Bluetooth and pair it with the printer.
OPTION A - Add the printer to the app. Tap on the icon on the top right and
choose your printer.
The icon will change to indicate battery level when connected.
①
②
③
PAIRING MOBILE DEVICE & INSTANT CAMERA PRINTER

20
OPTION B - Add the printer to the app. Go to "Settings" in the main menu,
choose “Printers”, then tap "Add Printer" and select your printer.
Your printer will appear in the "Printers" list and the icon will change to
indicate battery level when connected.
③
― OR ―
PAIRING MOBILE DEVICE & INSTANT CAMERA PRINTER