Canon PIXMA G7000 Series User manual

Guía de inicio
Lea primero Información de seguridad
e información importante (apéndice).
Conguración en línea
Hay vídeos e instrucciones detalladas en
el sitio web de Canon.
Congurar un ordenador
Congurar un teléfono inteligente
Getting Started
Read Safety and Important Information
(addendum) rst.
Online Setup
Detailed instructions and videos are
available on the Canon website.
Setup a Computer
Setup a Smartphone

Go
Instalación de la impresora ...............................................................................................página 1
Conexión con un ordenador, teléfono inteligente o tableta.......................página 4
Vídeos instructivos
Cómo sujetar la impresora
Installing the Printer...................................................................................................................page 1
Connecting to a Computer, Smartphone or Tablet...............................................page 4
Holding the Printer
Instructional Videos

1
ENGLISH
Setting Up the Printer Online Setup
1. Box Contents
•
Print heads • Ink bottles
•
Power cord
•
Modular cable
•
Setup CD-ROM for Windows
•
Safety and Important Information
•
Getting Started (this manual)
2. Removing Packing Materials
1 Remove and dispose of any packing materials
and orange tape.
2 Open the scanning unit / cover, remove and
dispose of the orange tape and protective
material inside.
a
b
3. Installing the Print Heads
1 Open the print head locking cover.
2 Take out each print head from the package and
remove the label.
3 Remove the protective tape.
4 Insert the C (color) print head on the left and the
B (black) print head on the right.
5 Close the print head locking cover and press
down until it clicks.
6 Press down both joint buttons completely until
they click.
Check!

2
Setting Up the Printer
4. Pouring Ink
Important
This product requires careful handling of ink. Ink may splatter
when the ink tanks are lled with ink. If ink gets on your clothes or
belongings, it may not come o.
1 Open the ink tank cover and tank cap on the left
of the printer.
2 Hold the ink bottle upright and gently twist the
bottle cap to remove.
Check!
PGBK
3 Align the nozzle of the ink bottle with the inlet.
4 Slowly stand the ink bottle upside down and
push down to pour the ink.
• If the ink does not pour, gently remove the ink bottle
and try again.
b
a
5 Gently remove the ink bottle from the inlet.
• Be careful not to spill the ink.
b
a
6 Replace the tank cap securely, and then close
the ink tank cover.
7 Repeat steps 1 through 6 to pour all ink into the
corresponding ink tanks on the right.
Check!
CMY
8 Close the scanning unit / cover.
Caution
Watch your ngers.
5. Turning on the Printer
1 Connect the power cord.
Back
Important
At this time, do not connect any other cables.
2 Open the operation panel and press the ON
button.

3
ENGLISH
3 When the following screen appears, use the [
and ]buttons to select a language, and then
press the OK button.
Important
If an error appears on the screen, see "If an error message
(support code) appears on the screen" on page 3 and
follow the instructions.
4 If the country or region selection screen
appears, use the [and ]buttons to select
your country or region, and then press the OK
button.
6. Loading Paper
1 When the following screen appears, use the [
and ]buttons to select Yes , and then press the
OK button.
2 Remove the cassette from the printer.
3 Slide apart the paper guides.
• Slide the right paper guide to the right edge. Align
the front paper guide with the Letter or A4 mark.
4 Load paper.
• Load 2 or more sheets of Letter or A4 sized plain
paper with the print side facing down.
• Place the paper against the front paper guide, and
align the right paper guide to the width of the paper.
ab
5 Replace the cassette.
6 Pull out the paper output tray.
7 Follow the on-screen instructions, and then
press the OK button.
• Check that Ready to connect appears on the
printer's screen.
Check the support code, and then follow the
instructions if the displayed code is written below.
• 1890
The protective materials are not removed.
"2. Removing Packing Materials" on page 1
• 1470
The print heads are not installed correctly.
"3. Installing the Print Heads" on page 1
• 1471
No print heads are installed.
"3. Installing the Print Heads" on page 1
• 1642
There may be insucient ink.
"4. Pouring Ink" on page 2
For all other cases, refer to the Online Manual.
If an error message (support code) appears on
the screen
Support code

4
Setting Up the Printer
7-a
Computer Smartphone
Computer and
smartphone
Connecting to a Computer
If you are using multiple computers, perform these steps on each computer.
1 Access the Canon website from a
computer.
2 Select Set Up.
3 Enter your printer's model name and
click Go.
4 Click Start.
5 Click If you have already prepared
your printer, go to Connect.
Note
The following steps are for Windows (except
Windows 10 in S mode) and macOS users. For other
operating systems, continue setup by following the
on-screen instructions instead.
6 Click Download.
7 Run the downloaded le.
8 Click Start Setup.
9 Follow the on-screen instructions.
• These operations may take some time.
• To connect to a smartphone as well, see "7-b.
Connecting to a Smartphone" on page 5.
Using the Setup CD-ROM for Windows
Double click EasySetup.exe in the CD-ROM, and then continue from step 3. If you do not have an
internet connection, open the win folder in the CD-ROM and double click SETUP.exe. This will install
the printer driver.
What device are you connecting?
7-a.Connecting to a Computer
Not connecting to any other devices 7-c