Canon PIXMA MX432 User instructions

Setting Up Your MX432 In
Default Mode (Tel Priority Mode)
With An Answering Machine
DSL/Cable Modem Connection
Next

Fax Easy Setup
NextPrevious
Click Next to step through this image-friendly version of Fax Easy Setup.
If you started Fax Easy Setup, on the fax machine’s operation panel, and
prefer to go through this image-friendly version…
Step 1
Press the FAX button at any screen
to go to fax standby mode.
Step 2
Click Next to proceed
through the setup.

Connecting The Phone Lines
NextPrevious

Connecting Your Phone/Answering Machine
NextPrevious
YES
Click Here or Go To Page 13
NO
Click the Next Button
4
Is your answering machine built into your phone?

Fax to Phone Line Connection
NextPrevious 5
Before
After
(Existing Phone Cord)
Wall jack
DSL/Cable
Modem P
C
(Existing Phone Cord) Answering
Machine
Hand Set
(Phone)
Hand Set
(Phone)
(Phone Cord included
with Canon printer)
(Existing Phone Cord)
(Existing Phone Cord)
Wall jack
DSL/Cable
Modem P
C
(Existing Phone Cord)
Answering
Machine

Fax to Phone Line Connection
NextPrevious 6
•Plug the provided phone cord into the DSL/Cable Modem.
(Phone Cord included
with Canon printer)
(Existing Phone Cord)
(Existing Phone Cord)
Wall jack
DSL/Cable
Modem P
C
(Existing Phone Cord)
Answering
Machine

Fax to Phone Line Connection
NextPrevious 7
•Plug the provided phone cord into the “LINE” jack located on the
rear of the multifunction.
(Phone Cord included
with Canon printer)
(Existing Phone Cord)
(Existing Phone Cord)
Wall jack
DSL/Cable
Modem P
C
(Existing Phone Cord)
Answering
Machine

Fax to Phone Line Connection
NextPrevious 8
•Remove the white plug from the upper jack labeled “EXT.”
(Phone Cord included
with Canon printer)
(Existing Phone Cord)
(Existing Phone Cord)
Wall jack
DSL/Cable
Modem P
C
(Existing Phone Cord)
Answering
Machine

Fax to Phone Line Connection
NextPrevious 9
•Plug the second phone cord into the “EXT.” jack located on the rear
of the multifunction
(Phone Cord included
with Canon printer)
(Existing Phone Cord)
Wall jack
DSL/Cable
Modem P
C
(Existing Phone Cord)
Answering
Machine
(Existing Phone Cord)

Fax to Phone Line Connection
NextPrevious 10
•Plug the second phone cord into the answering machine.
(Phone Cord included
with Canon printer)
(Existing Phone Cord)
(Existing Phone Cord)
Wall jack
DSL/Cable
Modem P
C
(Existing Phone Cord)
Answering
Machine

Fax to Phone Line Connection
NextPrevious 11
•Plug the third phone cord into the answering machine.
(Phone Cord included
with Canon printer)
(Existing Phone Cord)
(Existing Phone Cord)
Wall jack
DSL/Cable
Modem P
C
Answering
Machine
(Existing Phone Cord)

Fax to Phone Line Connection
NextPrevious 12
•Plug the third phone cord into the phone.
(Phone Cord included
with Canon printer)
(Existing Phone Cord)
(Existing Phone Cord)
Wall jack
DSL/Cable
Modem P
C
(Existing Phone Cord)
Answering
Machine

Fax to Phone Line Connection
NextPrevious 13
Before
After
Hand Set
(Phone)
(Existing Phone Cord)
Wall jack
DSL/Cable
Modem P
C
(Existing Phone Cord)
(Existing Phone Cord)
(Existing Phone Cord)
Wall jack DSL/Cable
Modem
P
C
(Phone Cord included with
Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 14
•Plug the provided phone cord into the DSL/Cable Modem.
(Existing Phone Cord)
(Existing Phone Cord)
Wall jack DSL/Cable
Modem
P
C
Hand Set
(Phone)
(Phone Cord included with
Canon printer)

Fax to Phone Line Connection
NextPrevious 15
•Plug the provided phone cord into the “LINE” jack located on the
rear of the multifunction.
(Existing Phone Cord)
(Existing Phone Cord)
Wall jack DSL/Cable
Modem
P
C
(Phone Cord included with
Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 16
•Remove the white plug from the upper jack labeled “EXT.”
(Existing Phone Cord)
(Existing Phone Cord)
Wall jack DSL/Cable
Modem
P
C
(Phone Cord included with
Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 17
•Plug the second phone cord into the “EXT.” jack located on the rear
of the multifunction
(Existing Phone Cord)
(Existing Phone Cord)
Wall jack DSL/Cable
Modem
P
C
(Phone Cord included with
Canon printer)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 18
•Plug the second phone cord into the phone.
(Existing Phone Cord)
(Existing Phone Cord)
Wall jack DSL/Cable
Modem
P
C
(Phone Cord included with
Canon printer)
Hand Set
(Phone)

Setting Up The Receive Mode
NextPrevious

Step 1
Turn on the MX432 by pressing the
ON button.
Step 2
Press the FAX button.
NextPrevious 20