Canon imageCLASS MF449x User manual

FT6-2954 (000) XXXXXXXXXX Copyright CANON INC. 2022 PRINTED IN XXXXX
Getting Started
Quick Operation P.29
Quick Setup NEXT PAGE
Please read "Important Safety Instructions" before operating this product. After you finish
reading this guide, store it in a safe place for future reference.
The information in this document is subject to change without notice.
https://oip.manual.canon
Getting Started
Introducción
   
Bắt đầu
Langkah Permulaan

Getting Started
Please read "Important Safety Instructions" before operating
this product. P.34
After you nish reading this guide, store it in a safe place for
future reference.
The information in this document is subject to change
without notice.
Introducción
Lea las "Instrucciones de seguridad importantes" antes de usar
este producto. página 44
Cuando termine de leer esta guía, guárdela en un lugar
seguro para futuras consultas.
La información de este documento puede ser modicada sin
previo aviso.

  
 52
   
 
    
 
Bắt đầu
Vui lòng đọc "Các Chỉ dẫn An toàn Quan trọng" trước khi vận
hành sản phẩm này. Tr.60
Sau khi đọc xong cuốn hướng dẫn này, vui lòng lưu trữ sách
ở nơi an toàn để tham khảo trong tương lai.
Thông tin trong tài liệu này có thể được thay đổi mà không
cần thông báo.
Langkah Permulaan
Sila baca "Arahan Keselamatan Penting" sebelum
mengendalikan produk ini. P. 68
Selepas anda habis membaca panduan ini, simpan dalam
tempat yang selamat untuk rujukan masa akan datang.
Maklumat dalam dokumen ini tertakluk pada perubahan
tanpa notis.
You can access
https://oip.manual.canon to read the User's Guide that
describes all functions of this machine.
Puede acceder a
https://oip.manual.canon para leer la Guía de usuario donde
se describen todas las funciones de este equipo.
 
  

Bạn có thể truy cập vào
https://oip.manual.canon để đọc Hướng dẫn người dùng
trong đó có mô tả tất cả chức năng của máy này.
Anda boleh mengakses
https://oip.manual.canon untuk membaca Panduan
Pengguna yang menerangkan semua fungsi mesin ini.
2
Quick Setup

Before starting the installation
•Removeallofthetape.
•DonotremovethestickerthatcoverstheUSB
port.
Sticker
Installation requirements
Provide a space of 100 mm or more around the
machine.
371 mm 464 mm 48 mm
453 mm 29 mm
Handset
(optional)
272 mm392 mm131 mm
Cassette feeding
module (optional)
Toner cartridge (included with the machine)
*
* This item
may not be
included
depending
on the
model of the
machine.
3
Installation of the Machine
Installing the MachineItems Included with the Machine
Quick Setup

5
6
7
1
2
3
4
4
Installation of the Machine
Quick Setup

8
9
Up to here
10
11
Attach the handset (optional).
5
Quick Setup

12
Install the cassette feeding module
(optional).
6
Installation of the Machine
Quick Setup

13
1
2
Next, proceed to configure the machine.
7
Quick Setup
En
Th
Vi
Es
Ms

Conguring the Method of
Connecting to a Computer
About Application Library*
Application Library is an application
that allows you to use useful functions
for routine jobs or other convenient
functions in a one-touch operation
without necessity of making functional
settings every time. You can access each
registered function by simply pressing
the appropriate button displayed in
the Home screen. For the respective
function, see the description displayed in
the Setup Guide.
* This function may not be available, depending
on the model of the machine.
1.
2. Configure the initial settings, according to the
screen.
•Setthelanguageandcountry/region.
•Setthetimezoneandcurrentdate/time.
•Configurethesettingstoprevent
unauthorizedaccess.
•Forthepurposeofconfirmation,enterthe
same PIN twice.
Before starting the configuration
•Themachinecannotbeconnectedto
both wired and wireless LANs at the
same time.
•Ifthemachineisconnectedtoan
unsecured network, your personal
information might be leaked to a third
party. Please be aware and careful of this.
•Themachinedoesnotcomewitha
router. Please have one ready, if necessary.
•Eveninanenvironmentwithoutwireless
LAN router, you can use Access Point
Mode to make a wireless connection to
the machine directly from your mobile
device(DirectConnection).
User's Guide
Specifying the connection method
•ToconnectviawirelessLAN:<Yes>
•ToconnectviawiredLANorUSB:<No>
To connect via wireless LAN
1. Make sure that the computer is connected to a
router properly.
2. Check the network settings on the computer.
8
Conguring the Machine
Conguring the Initial Settings of
the Machine
Configure the settings in the following order.
Quick Setup
En

For details
"Setting Up Using the Setup Guide" in the User's Guide
3. TakenoteoftheSSIDandnetworkkey.
•Checkthelabelontherouter. User's Guide
•Thesettingoperationiseasieriftherouteris
provided with a WPS mark. User's Guide
4. Set the access point and network key
according to the screen below.
1. Select<OK>.
2. Select<SSIDSettings>.
3. Select<SelectAccessPoint>.
4. Selecttheaccesspoint(SSID),andselect
<Next>.
5. Select<OK>.
6. Enteranetworkkey,andselect<Apply>.
7. Select<Yes>.
•Waituntilmessage<Connected.>is
displayed.
8. Select<Close>.
•TheIPaddresswillbeautomatically
configured in a few minutes.
5. Install the driver and software.
P.10 "Installing the software"
Now you are finished with the
configuration of the initial settings.
If your machine is provided with the fax
function, proceed to configuring
the fax settings. P.11
To connect via wired LAN
The machine does not come with a LAN cable.
Please have one ready, if necessary.
1. Make sure that the computer is connected to a
router properly.
2. Check the network settings on the computer.
3. Connect the LAN cable.
•Afterconnectingthecable,waitafewminutes
(until the IP address is set automatically).
•IfastaticIPaddresshasbeensetonthe
computer, set the machine's IP address
manually.
4. Install the driver and software.
P.10 "Installing the software"
Now you are finished with the
configuration of the initial settings.
If your machine is provided with the fax
function, proceed to configuring
the fax settings. P.11
9
Quick Setup
En

To connect via USB
DonotconnecttheUSBcablebeforeinstalling
the driver. If you did, disconnect the USB cable
from the computer, close the dialog box, and then
perform the following procedure from step 1.
1. Install the driver and software.
P.10 "Installing the software"
•Whenascreenwithinstructionsfor
connecting the USB cable to the machine is
displayed, remove the sticker that covers the
USB port.
Now you are finished with the
configuration of the initial settings.
If your machine is provided with the fax
function, proceed to configuring
the fax settings. P.11
Installing the software
•Theproceduredescribedhereisonlyapplicable
whenyourcomputerrunsontheWindowsOS.
For more details on the software installation
procedure, see the driver's manual.
•Fortheinstallationwhenyourcomputerrunson
themacOS,seethedriver'smanual.
•Yourmachinemaynotcomewiththedriverfor
themacOS,dependingonthetimeofpurchase.
New drivers are uploaded to the Canon website,
and you can download and use the latest one.
1.
2.
If the screen is not displayed properly, re-
inserttheCD-ROM/DVD-ROMorsearchfor
"D:\MInst.exe"ontheWindowsplatform(This
descriptionassumesthat"D:"istheCD-ROM/
DVD-ROMdrivename).
Using the scanner conveniently
Configuring the network settings with "Send
Function Setting Tool" allows you to directly
send scanned originals with e-mail or I-Fax
or store them in a shared folder or on the FTP
server.
In the screen displayed in step 2, select [Start
Software Programs] [Send Function Setting
Tool] to start the Send Function Setting Tool.
10
Conguring the Machine
Quick Setup
En