Canon PIXMA MX712 Instruction Manual

<< Previous Next >>
Getting Your Multifunction
Back On Your Network
After A Router Or Network Change
PIXMA MX712
Windows and Mac OS
1

If any of the following situations exist
•You have replaced your Router or Access Point
•You want to use a different wireless network
•Router settings have been changed.
Please complete the following steps to apply the new
configuration settings to your multifunction.
2
<< Previous Next >>

Preparing to Connect My Multifunction
To My Network << Previous Next >>
Network Requirements
Before connecting the machine to the network, make sure that configuration of the computer and access point or router is
complete, and that the computer is connected to the network.
Wireless Connection
Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that
configuration of the computer and access point or router is complete.
3

Connect the PIXMA MX712 to Your Wireless Network
To re-establish communication on the network after changing the router / Access Point or when connecting to a different network, the settings
on the Multifunction need to be changed
Simply insert the Setup CD-ROM that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions On the
following screen, select the Start Setup Again option
Connecting to the Network
4
<< Previous Next >>

Connecting to the Network
5
<< Previous
5
On the Connection Method Selection screens, be sure to select Network Connection, then Wireless Connection
Follow the instructions until the Completion of Connection screen. It is not necessary to re-install the software. Click Next on
the Completion of Connection screen, then click Back, then Exit. Setup is now finished
Next >>
When the Printer Setup screen appears, click Next. You will be setting up the printer the same way as a first-time setup.

Connecting to the Network
6
<< Previous
6
If you can’t find your CD-ROM, you may download the MX710 series Mini Master Setup, which includes the same step-by-step installation as the
CD-ROM, by following the instructions below:
1. Click here to access the MX712 Drivers & Software page.
2. Select the operating system and version of your computer (see example below).
3. Look under the ‘Drivers’ section.
4. Click on the ‘MX710 series Mini Master Setup’ entry
5. After reading the details and disclaimer, click ‘I Agree – Begin Download’ and save the file to your computer.
6. Once the download is complete, double-click the file from its download location to begin the installation.
7. Follow the same instructions as when using the Setup CD-ROM. See the previous page