Deep Cleaning Select "Deep Cleaning" from the printer driver utility. Cleaning time
(It is necessary to connect the printer to the PC.) :Approx.60seconds.
Paper feeding without printing Click the RESET button three times. Perform paper feeding from the ASF
(For feeding cleaning sheet through the ASF.)
Print sample : See *3
Waste ink Amount
Destination setting
EEPROM Reset See *2 EEPROM reset / Destination setting
(Reset waste ink amount)
Destination setting See *2 EEPROM reset / Destination setting
(Japan/SP/Others)
*1 Service test print
-1 Without the cartridge installed and with the front cover closed, connect the AC cord
while holding down the RESET button.
-2 Release the RESET button, press it down again within 5 seconds and release it once more.
-3 Open the front cover and install the print head (QY6-0038-000) and set A4-sized paper.
-4 Press the RESET button 3 times in a row.
-5 Close the front cover.
-6 The printer starts service test printing.
*2 EEPROM reset / Destination setting
-1 Without the cartridge installed and with the front cover closed, connect the AC cord
while holding down the RESET button.
-2 Release the RESET button, press it down again within 5 seconds and release it.
-3 Hold down the RESET button for 2 seconds or more and release it once more.
-4 < EEPROM Reset > < Destination setting >
Hold down the RESET button for 2 secs or more -Japan Press the RESET button once.
and release it. -Others Press the RESET button twice
-SP Press the RESET button 3 times
After the button is pressed, the carriage will move
the same number of times as the RESET button was pressed.
*3 Print sample of 'Service test print'
You can check the EEPROM settings with a 'Service test print'. (See the first part of the 'Service test print.')
