Canon SELPHY CP900 User manual

CEL-ST2VA2M0 © CANON INC. 2012
ENGLISH
DANSK
DEUTSCH
ESPAÑOL
FRANÇAIS
ITALIANO
NEDERLANDS
SUOMI
SVENSKA
Printer User Guide
Printer User Guide
Brugervejledning til printeren
Benutzerhandbuch des Druckers
Guía del usuario de la impresora
Guide d’utilisation de l’imprimante
Guida dell'utente della stampante
Gebruikershandleiding van de printer
Tulostimen käyttöopas
Handbok för skrivaren

Printer User Guide
ENGLISH
OMake sure you read this guide including the “Safety Precautions”
section before using the printer.
ORead this guide carefully for the correct use of the printer.
OKeep this guide handy for future reference.

2
Package Contents
Check if the following items are included in your printer package, using the □ check boxes.
If anything is missing, contact the retailer where you purchased the printer.
□SELPHY Printer Unit □Compact Power Adapter
CA-CP200 B □Power Cord
□Paper Cassette
(Postcard Size)
PCP-CP400
□SELPHY CP900
Solution Disk □
Printer User Guide
(This Guide)
□Warranty System Booklet
Ink and Paper (Sold Separately)
Before using the printer, be sure to purchase a Color Ink Cassette/Paper Set separately.
Color Ink Cassette/Paper Set
Necessary Paper Cassette
Product Name Paper Size Number of
Possible Prints
Color Ink Cassette/Paper Set KP-36IP
(Postcard)
Postcard
Size
36
Paper Cassette PCP-CP400
(Included with SELPHY)
Color Ink Cassette/Paper Set KP-72IN
(Photo Paper) 72
Color Ink Cassette/Paper Set KP-108IN
(Photo Paper) 108
Color Ink Cassette/Paper Set KC-36IP
Card Size
36
Paper Cassette PCC-CP400*
Color Ink Cassette/Label Set
KC-18IF (Full Page Sticker) 18
Color Ink Cassette/Label Set KC-18IL
(8 Stickers Per Page) 18
Color Ink Cassette/Square Label Set KC-18IS
(square stickers) 18
* Purchase separately with Color Ink Cassette/Paper Set.
Some accessories may not be available in some regions.

3
Read This First
OThe images printed with this product should be intended for personal use. Do not print images that
infringe upon copyright laws without the prior permission of the copyright holder.
OThis product’s warranty is only effective in the country of sale. If there is a problem with the printer
while abroad, please return it to the country of sale before proceeding with a warranty claim to a Canon
Customer Support Help Desk.
OThe LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99%
of the pixels operate to specification. However, some pixels may occasionally misfire or appear as red or
black dots. This is not a malfunction. Also, this will not affect the printed image.
OThe LCD monitor may be covered with a thin plastic film for protection against scratches during shipment.
If so, remove the film before using the printer.
Conventions Used in this Guide
OThis printer will be referred to as “SELPHY” or “printer”.
OIcons are used in the text to represent SELPHY’s buttons. For details, refer to “Controls” (p. 6).
OLanguage that displays on the screen appears inside [ ] (square brackets).
O : Indicates important notes.
O : Indicates tips and additional information.
O(p. xx): Indicates where you can find more information. xx: Indicates the page number.
OThis guide assumes all functions are at their default settings.
OThe various types of memory cards that can be used in this printer are collectively referred to as “memory
cards”.
Table of Contents
Package Contents ________________________ 2
Ink and Paper (Sold Separately) _____________ 2
Read This First __________________________ 3
Conventions Used in this Guide _____________ 3
Safety Precautions _______________________ 4
Setting Up SELPHY_______________________ 5
Component Guide ________________________ 6
Information Displayed on the Screen _________ 7
Getting Started __________________________ 7
Setting the Display Language ______________ 11
Memory Cards You Can Use _______________ 12
Images That Can Be Printed _______________ 12
Selecting and Printing Images______________ 13
Printing All Images_______________________ 16
Storing the Printed Photos_________________ 17
Cleaning Up After Printing _________________ 17
Cropping and Printing Images______________ 18
Printing ID Photos _______________________ 19
Printing a Variety of Images________________ 20
Printing via Wireless LAN __________ 25
Before Using Wireless LAN________________ 26
Selecting Communication Mode ____________ 28
Printing in Ad Hoc Mode __________________ 29
Printing in Infrastructure Mode _____________ 31
Printing Images from Your Computer ________ 35
Other Functions of Wireless LAN ___________ 41
Connecting with Other Devices
Using a Cable ___________________ 43
Printing From Your Computer ______________ 44
Printing From Your Digital Camera __________ 46
Appendix _______________________ 47
Printing When a Power Outlet is not
Available ______________________________ 48
Troubleshooting_________________________ 49
Specifications __________________________ 52
Handling SELPHY _______________________ 54

4
Safety Precautions
OBefore using the product, please ensure that you read the safety precautions described below. Always
ensure that the product is used correctly.
OThe safety precautions noted on the following pages are intended to prevent injuries to yourself and other
persons, or damage to the equipment.
OBe sure to also check the guides included with any separately sold accessories you use.
Warning Denotes the possibility of serious injury or death.
OStore this equipment out of the reach of children and infants.
Mistakenly putting the power cord around a child’s neck could result in asphyxiation.
OUse only recommended power sources.
ODo not attempt to disassemble, alter or apply heat to the product.
OAvoid dropping or subjecting the product to severe impacts.
OTo avoid the risk of injury, do not touch the interior of the printer if it has been dropped or
otherwise damaged.
O
Stop using the product immediately if it emits smoke, a strange smell, or otherwise behaves abnormally.
ODo not use organic solvents such as alcohol, benzine, or thinner to clean the equipment.
ODo not let the product come into contact with water (e.g. sea water) or other liquids.
ODo not allow liquids or foreign objects to enter the printer.
This could result in electrical shock or fire.
If liquid comes into contact with the product, unplug it from the outlet and consult your retailer or a Canon
Customer Support Help Desk.
ODo not touch this printer or the power plug during thunderstorms.
This could result in electrical shock or fire. Immediately stop using the equipment and distance yourself from it.
OUnplug the power cord periodically and wipe away any dust and dirt that has collected on the
plug, the exterior of the power outlet, and the surrounding area with a dry cloth.
ODo not handle the power cord with wet hands.
ODo not use the equipment in a manner that exceeds the rated capacity of the electrical outlet or
wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into
the outlet.
ODo not allow dirt or metal objects (such as pins or keys) to contact the terminals or plug.
ODo not cut, damage, alter or place heavy items on the power cord.
This could result in electrical shock or fire.
ODo not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROMs.
Playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers. It is also possible to
suffer hearing loss from listening with headphones to the loud sounds of a CD-ROM played on a music CD player.
Caution Denotes the possibility of injury.
ODo not stick any part of your hand into the printer interior.
OBe sure to place SELPHY safely so as to avoid tripping over the power cord.
This could lead to injury or damage the printer.
OAvoid using, placing or storing the printer in the following places.
●Places subject to strong sunlight. ●Places subject to temperatures above 40 °C (104 °F).
●Humid or dusty areas. ●Places subject to strong vibrations.
This may heat up and damage the printer or adapter and could result in electrical shock, burn, injury, or a fire.
High temperature may cause deformation of the adapter or printer casing.

5
Caution Denotes the possibility of damage to the equipment.
OUnplug the product from the power outlet when you are not using it.
ODo not place anything, such as cloth, on top of the printer while in use.
Leaving the unit plugged in for a long period of time may cause it to overheat and become distorted, resulting
in fire.
ONever reuse paper for printing, even if an image is only printed on part of the paper, and there is
leftover blank space as shown.
Reusing paper to print can cause the ink sheet to become stuck to the paper or cause paper jams and
damage the printer.
ODo not disconnect the power plug while printing.
If you have accidentally turned off the power, turn it on again and wait for the paper to be ejected. Consult
your retailer or a Canon Customer Support Help Desk in the event of a paper jam. Do not remove jammed
paper by force. The printer could be damaged.
ODo not use the printer near a device that creates a magnetic field such as a motor, or in a dusty
place.
This may damage the printer or cause the printer to malfunction.
Setting Up SELPHY
More than the
length of the
paper
10 cm
(4 in.) or
more
10 cm
(4 in.) or
more
OPlace SELPHY on a stable and even surface, such as a
table. Never place it on an unstable or tilted surface.
OKeep SELPHY at least 1 m (3 ft.) from devices emitting
electromagnetic waves or strong magnetic fields.
OMake sure there is at least 10 cm (4 in.) of free space
around SELPHY.
OSince paper will pass in and out of SELPHY during
printing, make sure the space behind the printer is
greater than the length of the paper.
ODo not use SELPHY near a device that creates a magnetic field such as a motor, or in a dusty
place. This may damage the printer or cause the printer to malfunction.
ODo not place near a television or radio. This may cause the printer to malfunction.

6
Component Guide
Card Slots (p. 12)
Paper Cassette
Compartment (p. 10)
Paper Cassette
Compartment Cover (p. 10)
Ink Cassette Lock (p. 14)
InkCassetteCompartment (p.10)
Ink Cassette Compartment
Cover (p. 10)
USB Terminal for Digital
Camera/USB Flash Memory
Connection (pp. 15, 46)
DC IN (Power Input) Terminal (p. 10)
USB Terminal for Computer (p.45)
Air Vent (p.54)
Paper Ejection Slot Security Slot*
* Security cables, such as a Kensington lock, can be attached to this slot.
Controls
Icons Used in
This Guide Name Function
– Screen (LCD Monitor) Displays images, setting screens, or error messages (p. 51)
qON Button Turns SELPHY on or off (p. 11).
kMENU Button Displays the menu screen (p. 11).
– EDIT Button Displays the edit menu and rotates the cropping frame.
oOK Button Sets the selected item.
uUp/+ COPIES Button
Specifies number of copies, selects items to set.
dDown/– COPIES
Button
lLeft Button Switches images, changes settings.
rRight Button
-Enlarge Button Switches the display, enlarges the cropping frame.
0Reduce Button Switches the display, reduces the cropping frame.
vBACK Button Restores the previous screen (p. 20), cancels printing (p. 14).
pPRINT Button Starts printing (p. 14).

7
Information Displayed on the Screen
File number
Print settings (pp. 21 – 24)
(Settings that are not available are
dimmed)
Number of copiesNumber of copies for the displayed image
Memory card slot (p. 12) Paper orientation
Shooting date of the displayed image
Print size
(Postcard size in this example)
Switching the screen display
You can display the image full-screen by pressing the -button. A frame to indicate the print range is also
displayed.
You can display 4 images on the screen by pressing the 0button.
Getting Started
Preparations for printing images. A Postcard size Color Ink Cassette/Paper Set (sold separately) (p. 2) will
be used as an example; however, preparation is the same for other sizes.
Take care not to get any dust on the paper since it may cause lines on the printed photos or damage the printer (p. 5).
Preparing the Ink Cassette
Ink sheet
Check the ink cassette and ink sheet.
OHold the ink cassette without touching the ink sheet
and check if the size of the paper you are going to
print matches the paper size shown on the ink cassette
(Postcard (4x6in) Size), Card Size, etc.).
OCheck that the ink sheet is taut with no slack. If the
ink sheet is slack, turn the sprocket as shown in the
illustration to tighten it, otherwise the ink sheet may be
torn when it is inserted into SELPHY.
OTake care not to touch the ink sheet, not to handle the ink cassette with wet hands, and not to
get any dust or dirt in the ink sheet. Dirt and water drops may cause lines on photos, poor print
quality, a tear in the ink sheet, or cause the printer to malfunction (p. 5).
OWhen tightening, turn the sprocket gently without force. Forcing it may cause a tear in the ink
sheet or the ink sheet will run out before completing a photo print, resulting in leftover paper.
ODo not reuse a spent ink cassette since this may damage the printer or cause malfunction.

8
Preparing the Paper Cassette
Check the paper size.
OCheck that the prepared ink cassette and the size shown
on the paper cassette (POSTCARD (4x6in), CARD SIZE,
etc.) match.
Open the lid.
OThere are two layers of lids. Open the outer lid first,
then open the inner lid .
Glossy side
Set the paper.
OSet the paper into the paper cassette that you prepared.
OYou can place up to 18 sheets in the paper cassette.
Inserting 19 or more sheets may damage the printer or
cause malfunction.
OHold the paper as shown in the illustration and load with
the glossy side up. (Do not touch the print side (glossy
side) of the paper with your fingers. This may prevent
you from making clean prints.)
OIf a protective sheet is included with the paper, remove it
and set only the paper into the cassette.
OWhen making Postcard size prints that have an area for
pasting a stamp, insert the cards so that the stamp area
is faced as shown in the illustration.
Close the lid.
OClose the inner lid until it clicks into place. Leave the
outer lid open during printing.
1
2
3
4

9
OUse only dedicated paper included in the genuine Canon brand Color Ink Cassette/Paper Sets
for use in SELPHY CP series printers. Regular printing paper, regular postcards, or dedicated
paper for SELPHY ES series printers cannot be used.
ONever do the following. This may damage the printer or cause the printer to malfunction.
- reverse the paper (the glossy side is the print side)
- bend or separate the paper at the perforations before printing
- use label sheets that have begun to peel or label sheets with
portions peeled
- write on a sheet before printing
- reuse paper for printing on the blank part (p. 5).
ODo not touch the springs on the paper cassette.
If the springs are bent or deformed, paper will not feed correctly
into SELPHY.
OOne spring is attached at the center of the top surface on card
sized paper cassettes.
OTake care not to touch or rub the print (the glossy) side of the
paper, not to handle the paper with wet hands, and not to get any
dust or dirt on the paper. Dirt and water drops may cause lines on
photos, poor print quality, or damage the printer (p. 5).
Attaching the Dust Protection Cover
By attaching the dust protection cover DPC-CP100, you can prevent dust or dirt from accumulating on the
paper. The dust protection cover may not be included in some regions. Purchase separately if required.
OInsert the dust protection cover as shown in the
illustration.
OIn a place with a lot of dust or dirt, or outdoors, the dust protection cover may not be able to
prevent dust or dirt from accumulating on the paper, so take care to select a clean environment
when using SELPHY.
OStore the dust protection cover in a bag to prevent dust when not using.
Spring

10
Inserting the Ink and Paper Cassettes
Open the covers.
OOpen the covers for the ink cassette and paper cassette
compartments.
Insert the ink cassette.
OInsert the ink cassette into the printer in the direction
indicated by the arrow on the cassette until it clicks and
locks into place.
OClose the ink cassette compartment cover.
Insert the paper cassette.
OMake sure that the outer lid is open (p. 8) and insert the
paper cassette all the way into the compartment.
Connecting the Power
Plug the adapter cord into SELPHY.
OFully insert the adapter plug into SELPHY.
Connect the power cord.
OConnect the power cord to the compact power adapter,
then plug the other end into a power outlet.
1
2
3
1
2

11
Setting the Display Language
You can change the language displayed in the LCD monitor menus and messages. The default setting is
English.
Turn on SELPHY.
OPress and hold the qbutton until the screen shown on
the left is displayed.
OTo turn the power off, press and hold the qbutton and
release when the screen display changes.
Approx. 45°
Raise the screen (LCD monitor).
ODo not raise the LCD monitor more than 45° as this may
result in damage or malfunction.
Display the settings screen.
OPress the kbutton.
OPress the ud buttons to select [Change Settings], and
then press the obutton.
Display the language settings screen.
OPress the ud buttons to select [ Language], and then
press the obutton.
Select a language.
OPPress the udlr buttons to select a language, and
then press the obutton.
OYou can go back to Step 2 if you press the vbutton
twice.
1
2
3
4
5

12
Memory Cards You Can Use
Memory Cards That Can be Used Without an
Adapter
Memory Cards That Require an Adapter (commercially
available)
O SD Memory Card
OSDHC Memory Card
OSDXC Memory Card
OMultiMediaCard
OMMCplus Card
OHC MMCplus Card
OminiSD Memory Card
OminiSDHC Memory Card
O microSD Memory Card
O microSDHC Memory Card
O microSDXC Memory Card
O RS-MMC Card *
O MMCmobile Card
OMMCmicro Card
* “RS-MMC” is an abbreviation of “Reduced-Size Multi Media Card”.
OFor memory cards that require an adapter, be sure to first insert the memory card into the adapter
before inserting into the appropriate card slot.
If you insert the memory card into a card slot without using an adapter, you may not be able to
remove the memory card from the printer.
OUse a memory card formatted in the device used for taking the images. A memory card formatted
on a computer may not be recognized.
ORefer to the user guide included with your memory card and adapter for handling instructions.
About USB Flash Memory
You can print images on a commercially available USB flash memory by connecting it to SELPHY (p. 15).
Images That Can Be Printed
JPEG images conforming to the Exif standard can be printed with SELPHY.
OIrregularly sized images, or images that have been edited on a computer may not display or print properly.

13
Selecting and Printing Images
You can select an image and specify the number of copies for printing. In this section, an SD memory card
will be used as an example, but you can print from other memory cards using the same steps.
Turn on SELPHY.
OPress and hold the qbutton until the screen shown on
the left is displayed.
OTo turn the power off, press and hold the qbutton and
release when the screen display changes.
Approx. 45°
Raise the screen (LCD monitor).
ODo not raise the LCD monitor more than 45° as this may
result in damage or malfunction.
Label side
Insert the memory card into the slot.
OInsert the card faced as shown in the illustration until it
clicks.
OTo remove the card, push it in until it clicks and release
your finger slowly.
XThe screen in Step 4 below (image display screen)
(p. 7) will be displayed.
Number of copies for the
displayed image
Number of copies
Select an image.
OPress the lr buttons to select an image to print.
OEvery 5th image will be displayed if you press and hold
the lr buttons.
Select the number of copies.
OPress the ud buttons to select the number of copies.
OIf you press and hold the ud buttons, the number
increases or decreases by 5 copies.
OTo print another image at the same time, repeat Steps 4
and 5.
1
2
3
4
5

14
Print.
OPress the thep button to start printing.
ODuring printing, the paper will pass in and out from the
back of SELPHY several times. Do not touch the paper
until printing has finished and the printed sheets collect
on the print output tray (on the outer lid of the paper
cassette).
ODo not let 19 or more printed sheets collect on the print
output tray.
ODuring printing, always press the vbutton to cancel
printing.
Insert the paper.
OIf the paper out message is displayed on the screen, pull
the paper cassette out from SELPHY without turning off
the power.
ORefill the paper cassette with new paper (p. 8) and
reinsert the cassette into SELPHY (p. 10).
Change the ink cassette.
OIf the ink out message is displayed on the screen, open
the ink cover without turning off the power.
OThe ink cassette will come out if you move the lock in
the direction shown in the illustration. Insert a new ink
cassette (pp. 7, 10).
ONever pull out the paper cassette, open the ink cassette compartment cover, or remove the
memory card while you can hear the printer’s operation sounds immediately after turning on the
printer, or during printing. This may damage the printer.
OPress the vbutton to cancel printing. You cannot cancel printing by pressing the ON button and
the printer could be damaged if you unplug it to disconnect power.
OIt may take some time before images are displayed on the screen in Step 4 if the memory card contains a large
number of images.
OIf the [DPOF images remain] screen is displayed, refer to “Printing Images Using Digital Camera Specified
Settings (DPOF Print)” (p .46).
OYou can specify up to 99 images in Step 4 and up to 99 copies per image in Step 5. However, the total number
of copies cannot exceed 999.
OThe printer does not stop printing until it finishes the page being printed even if you press the vbutton to
cancel printing.
Avoiding Incomplete Photos
Note the following to avoid wasted remaining paper due to the ink sheet running out before completing a
photo print.
ODo not turn the sprocket too much when tightening the ink sheet (p. 7).
OAlways press the vbutton when you want to cancel printing and never turn off the power before pressing
the vbutton (Step 6).
OIf the paper out message is displayed on the screen, refill the paper without turning off the power and
without removing the ink cassette (Step 7), or press the vbutton to cancel printing (Step 6).
Depending on print conditions, you may not be able to avoid incomplete photo prints due to the ink sheet
running out in some cases even if you follow the above instructions.
6
7
8

15
Printing From USB Flash Memory
Just like images on memory cards, images on commercially available USB flash memory can also be printed.
Insert a USB flash memory.
OInsert a USB flash memory as shown.
OAll further steps are the same as those used for printing
images from memory cards (pp. 13 – 14).
ODepending on the brand of USB flash memory used, it may be difficult to insert or remove, and it may not
operate properly.
ORefer to the user guide included with your USB flash memory for operating instructions.
Printing 1 Copy of the Selected Image
You can print 1 copy of the selected image with simple operation.
Select and print an image.
OSelect the image as described in Steps 1 to 4 on p. 13.
OPress the pbutton to print 1 copy of the selected
image.
OIf you have specified the image and the number of copies in Steps 4 to 5 on p. 13, SELPHY
will print as specified even if you carry out the above operations. Therefore, make sure that the
number of copies is "0" in Step 4 on p. 13 before trying this operation.
Printing on Square Stickers
OYou can print square images on stickers using Color Ink
Cassette/Square Label Set KC-18IS (p. 2).
OSet [Borders] to [ Bordered] (p. 21).
OIf the image is not square, the image may not fit into the sticker or may leave margins.

16
Printing All Images
You can print all images on a memory card at once.
Display the menu.
OPress the kbutton.
Display the settings screen.
OPress the ud buttons to select [Print All Images], then
press the obutton.
Number of
sheets required
Number of
images on card
Number of copies
Select the number of copies.
OPress the ud buttons to set the number of copies.
Print the images.
OPress the pbutton to start printing.
OTo cancel printing, press the vbutton.
OIf there are 1000 or more images on the card, only 999 copies will be printed in order of the most recent by
shooting date.
OYou can specify up to 99 copies in Step 3. However, the total number of copies cannot exceed 999.
(For example, you can specify up to 9 copies when you have 100 images in the card.)
1
2
3
4

17
Storing the Printed Photos
OWhen both edges of a print have perforations, you can remove the edges
by bending them.
OUse an oil-based pen to write on prints.
OTo prevent discoloration, do not store prints in places subject to
temperatures of over 40 °C (104 °F), humid or dusty places, or in direct
sunlight.
OAvoid the following actions as they may result in color change, color
fading or color bleeding: Sticking any type of adhesive tape on a print
surface, allowing print surfaces to come into contact with vinyl or plastic,
applying alcohol or other volatile solvents to a print surface, or leaving the print surface tightly pressed
against other surfaces or objects for prolonged periods.
OIf you wish to mount prints in an album, select an album with photo covers made of nylon, polypropylene
or cellophane.
OColor may change over time or depending on storage conditions. Canon assumes no liability for
color changes.
Cleaning Up After Printing
Turn off SELPHY (p. 11), then remove the memory card or USB flash memory.
Lower the screen (LCD monitor) flat for storage.
Unplug the power cord from the power outlet and disconnect the adapter plug from SELPHY.
OIf the compact power adapter is hot, wait until it has cooled down before you store it.
Remove the paper cassette and close the paper cassette compartment cover. Keep the remaining paper
inside the cassette and store the cassette in a dark, cool, and dry place free from dust.
OKeep the ink cassette inside SELPHY.
OStore SELPHY horizontally, in a dark place free from dust. Dust and dirt may cause white lines on
photos or damage the printer.
OWhen you have more than one ink cassette, keep one inside SELPHY, and keep the other inside
the original packaging or a bag to protect it from dust, and store it in a dark place.
OWhen storing new paper and ink cassettes, leave them in unopened packages, and keep them in
a dark place.

18
Cropping and Printing Images
You can crop and print part of an image.
Display the cropping screen.
OSelect an image as described in Step 4 on p. 13, press
the EDIT button, and then press the obutton.
XA cropping frame to indicate the range will be displayed.
Determine the range.
OThe cropping frame switches between portrait and
landscape each time you press the EDIT button.
OYou can move the cropping frame by pressing the
udlr buttons.
OYou can enlarge the cropping frame by pressing the -
button and shrink it by pressing the 0button.
Make the setting.
OWhen you press the theo button, the cropping range is
set and the screen returns to the image display screen
with displayed at the bottom left.
OTo crop another image and print at the same time, repeat
Steps 1 to 3.
Print the images.
OPrint as described in Step 6 on p. 14.
XThe cropping range is cleared when printing is finished.
OIf you want to change the cropping range after setting it, press the EDIT button in the image display screen,
press the ud buttons to select [Adjust Cropping], and press the obutton to repeat Steps 2 to 3.
OIf you want to cancel the cropping range after setting it, press the EDIT button in the image display screen, press
the ud buttons to select [Reset Cropping], press the obutton to display the reset cropping screen, and then
press the obutton again.
OThe cropping ranges are all cleared if you turn SELPHY off or remove the memory card before printing them.
OYou can set up to 99 images with cropping ranges.
OYou cannot crop images when you are printing with [Print All Images] or [DPOF Print], or you have selected [ Index]
or [ Shuffle] in [Page Layout] (p. 22).
OYou cannot change the vertical and horizontal ratio of the cropping frame on the screen.
OYou can change the number of copies by pressing the ud buttons in the image display screen in Step 3. The
cropping range setting is not cleared by setting the number of copies to 0.
1
2
3
4

19
Printing ID Photos
You can print your image as an ID photo. You can
select the size from [Multi-size], [Standard]*, and
[Custom].
Also, you can select up to 2 types of images to be
printed on 1 sheet.
* The Standard size conforms to the ICAO international
standards.
Set to print ID photos.
OPress the kbutton.
OPress the ud buttons to select [ID Photo], and then
press the obutton.
Specify the ID photo size.
OPress the lr buttons to select the size, and then press
the obutton.
OIf you have selected [Custom], press the ud buttons to
select [Long Side], press the lr buttons to specify the
length, then specify the length for [Short Side], and then
press oagain. The values which can be specified in
[Short Side] change automatically according to the value
you have specified in [Long Side].
OIf you have selected [Multi-size], the size of the image to
be printed is displayed.
Select and print the images.
OSelect the image by pressing the lr buttons, and press
the ubutton. is displayed at the bottom right of the
screen (up to 2 images).
OPress the EDIT button to set the cropping range (p. 18).
OPrint as described in Step 6 on p. 14.
XSettings are cleared when printing is finished.
OThe ID photo may not be accepted officially, depending on the institution the ID photo is required for. Please
contact the appropriate institution for regulation details.
OYou cannot use card size paper.
O[Borders] settings will be ignored. Also, the date is not printed.
OIf you have selected 2 types of images in Step 3, these 2 types are printed in equal numbers for the number of
columns in the layout. If you have selected 2 types of images and the number of columns is an odd number,
nothing will be printed in the center column.
Crop the image for the passport.
OIf you display the cropping range (p. 18) while the
[Standard] size is selected for [ID Photo], 2 lines are
displayed.
OAdjust so that one line is at the top of the head and the
other line is under the chin to print a passport photo
conforming to the passport standards.
OPlease contact the appropriate institution for regulation details other than regarding position and size of the face.
1
2
3