Canon PIXMA MX360 Series Instruction and safety manual

Distinctive Ring Pattern Detection
(DRPD)
Fax Line Setup Guide
MX360 or MX410
Next

Connecting The Phone Lines
NextPrevious

(Existing Phone Cord)
Wall Jack Hand Set
(Phone)
Fax to Phone Line Connection
NextPrevious 3
Before
After
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 4
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
•Plug the provided phone cord into the wall jack

Fax to Phone Line Connection
NextPrevious 5
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
•Plug the provided phone cord into the “L” jack located on the rear of
the multifunction

Fax to Phone Line Connection
NextPrevious 6
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
•Remove the white plug (D) from the upper jack.

Fax to Phone Line Connection
NextPrevious 7
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
•Plug the second phone cord into the “telephone” jack located on
the rear of the multifunction

Fax to Phone Line Connection
NextPrevious 8
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)
•Plug the second phone cord into the phone

Setting Up The Receive Mode
NextPrevious

Step 1
Turn on the MX360 or MX410 by
pressing the ON button.
Step 2
Press the FAX button.
NextPrevious 10
MX360 MX410

Step 4
Use the Left or Right Arrow button to
select “Receive mode set”.
Step 3
Press the Menu button
NextPrevious 11

Step 5
Press the OK button
Step 6
The “Receive mode set” screen will
appear
NextPrevious 12

Step 7
Use the Left or Right arrow button
to select “DRPD”
Step 8
Ensure that “DRPD” is displayed
NextPrevious 13

Step 9
Press the OK button
Step 10
The “Make advanced settings?”
screen will appear
NextPrevious 14

Step 11
Use the Left or Right arrow button
to select “Yes”
Step 12
Ensure “Yes” is selected
NextPrevious 15

Step 13
Press the OK button
Step 14
The “DRPD” screen will appear
NextPrevious 16

Step 15
Use the Left or Right arrow button
to select “DRPD: Fax ring pat.”
Step 16
Confirm “DRPD: Fax ring pat.” is
selected
NextPrevious 17

Step 17
Press the OK button
Step 18
The “DRPD: Fax ring pat.” screen
will appear
NextPrevious 18

Step 19
Use the Left or Right arrow button
to select the ring pattern assigned
to your fax number. Your phone
service provider assigns this
pattern
Step 20
Once you have selected the
appropriate ring pattern, press the
OK button
NextPrevious 19

Step 21
The “DRPD” screen will reappear
Step 22
Press the FAX button
NextPrevious 20