Canon Wireless File Transmitter WFT-E4 II A User manual

Wireless File Transmitter
WFT-E4 II
To comply with local radio wave regulations, Canon offers four region-specific versions of the
transmitter (WFT-E4 IIA, E4 IIB, E4 IIC, and E4 IID) in various areas around the world (p.8). For
convenience, we refer to the product in this manual simply as “the transmitter,” without
reference to versions A, B, C, or D.
Before using the WFT-E4 II with an EOS 5D Mark II, make sure the camera firmware is Ver.
1.2.0 or later.
For details, contact a Canon Service Center.
E
INSTRUCTION MANUAL
COPY

2
The Wireless File Transmitter WFT-E4 II is an accessory for EOS 5D Mark II camera. It gives
the camera wireless and wired LAN functionality and adds a USB port, enabling the following
operations.
It also includes a vertical-grip shutter button for convenience in vertical shooting.
Introduction
Wireless and Wired LAN Functions
FTP Transfer
EOS Utility
WFT Server
Transfer images to an FTP server
Use a web browser to capture, view,
and download images remotely
Use EOS Utility to capture, view, and
download images remotely
Linked Shooting
Wirelessly trigger shooting by slave
cameras linked to a master camera
COPY

3
Introduction
Functions When Connected via USB
External Media
Record or backup images onto external media
Add the latitude, longitude, altitude, date and time, and
other shooting information to images
GPS
Connected by a USB cable Connected via Bluetooth
COPY

4
These instructions should be followed only after your wireless or wired LAN and FTP server
settings are complete. For details on configuring these settings, refer to the documentation
provided with the respective equipment.
Terms in brackets [ ] indicate button or icon names or other software elements. Brackets
also denote camera menu items.
Page numbers in parentheses indicate where you can find additional information.
Instructions on camera operations should be followed only after you have read the Camera
Instruction Manual and are familiar with operating the camera.
Sections of this manual labeled with the following symbols contain information of the
corresponding nature.
: Warnings to avoid potential problems are labeled with a caution symbol.
: Supplemental information is labeled with a note symbol.
Conventions Used in this Manual
Windows is a trademark or registered trademark of Microsoft Corporation in the United
States and other countries.
Macintosh is a registered trademark of Apple Corporation in the United States and other
countries.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Wi-Fi Certified, WPA, WPA2, and the Wi-Fi Certified logo are trademarks of the Wi-Fi
Alliance.
WPS as used on camera settings screens and in this manual signifies Wi-Fi Protected
Setup.
UPnP is a trademark of the UPnP Implementers Corporation.
Bluetooth and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc.
All other corporate and brand names in this manual are trademarks or registered
trademarks of their respective owners.
Using the transmitter for remote image transfer, capture, or viewing requires adequate knowledge of
configuring your wireless or wired LAN and FTP server.
Canon cannot provide support for configuring wireless or wired LANs or FTP servers.
Note that Canon cannot be held liable for any loss or damage to the transmitter from erroneous network
or FTP server settings. In addition, Canon cannot be held liable for any other loss or damage caused by
use of the transmitter.
COPY

5
Chapter List
Introduction 2
Basic Network Settings 19
Transferring Images to an FTP Server 33
Remote Capture Using EOS Utility 47
Remote Capture Using WFT Server 53
Linked Shooting 65
Managing Settings Information 69
Using External Media 75
Using GPS Devices 87
Troubleshooting 95
Reference 113
1
2
3
4
5
6
7
8
9
10
COPY

6
Introduction 2
Conventions Used in this Manual ...................................................................................................... 4
Chapter List........................................................................................................................................ 5
Contents............................................................................................................................................. 6
Areas of Use and Restrictions ........................................................................................................... 8
Safety Warnings............................................................................................................................... 10
Nomenclature................................................................................................................................... 11
Attaching to the Camera .................................................................................................................. 13
Vertical Shooting Controls ............................................................................................................... 14
Installing and Removing the Battery ................................................................................................ 15
Using a Household Power Outlet..................................................................................................... 17
Subsequent Organization of This Manual........................................................................................ 18
1Basic Network Settings 19
Getting Ready .................................................................................................................................. 20
Displaying the Connection Wizard ................................................................................................... 21
Selecting the Communication Method and LAN Type ..................................................................... 22
Using the Wizard to Establish a Connection.................................................................................... 25
WPS Connections (PBC Mode) ....................................................................................................... 27
WPS Connections (PIN Mode) ........................................................................................................ 28
Configuring Network Settings .......................................................................................................... 29
2Transferring Images to an FTP Server 33
Configuring FTP Communication Settings....................................................................................... 34
Automatic Image Transfer After Each Shot ..................................................................................... 36
Transferring Images Individually ...................................................................................................... 38
Batch Transfer ................................................................................................................................. 40
Checking Image Transfer History .................................................................................................... 44
Viewing Transferred Images ............................................................................................................ 45
3Remote Capture Using EOS Utility 47
Configuring EOS Utility Communication Settings ............................................................................ 48
Using EOS Utility ............................................................................................................................. 51
4Remote Capture Using WFT Server 53
Configuring WFT Server Communication Settings .......................................................................... 54
Displaying WFT Server .................................................................................................................... 56
Viewing Images................................................................................................................................ 57
Remote Capture [Camera control] ................................................................................................... 59
Remote Capture [Simple control]..................................................................................................... 62
Remote Capture............................................................................................................................... 63
Contents
COPY

7
Contents
5Linked Shooting 65
Setting Up Linked Shooting ............................................................................................................. 66
Arranging the Slave Cameras.......................................................................................................... 68
6Managing Settings Information 69
Checking Settings ............................................................................................................................ 70
Changing Settings............................................................................................................................ 71
Saving and Loading Settings ........................................................................................................... 73
7Using External Media 75
Connecting External Media.............................................................................................................. 76
Choosing Recording Media When Shooting .................................................................................... 79
Using Together With a CF Card....................................................................................................... 81
Backing Up on External Media......................................................................................................... 82
8Using GPS Devices 87
Connecting GPS Devices with a USB Cable ................................................................................... 88
Connecting GPS Devices via Bluetooth........................................................................................... 91
9Troubleshooting 95
Responding to Error Messages ....................................................................................................... 96
Wireless LAN Notes....................................................................................................................... 110
Checking Network Settings............................................................................................................ 111
10 Reference 113
Creating and Registering Captions ................................................................................................ 114
Specifications................................................................................................................................. 115
Index .............................................................................................................................................. 125
COPY

8
To comply with local radio wave regulations in various areas around the world, Canon offers
four region-specific versions of the transmitter (WFT-E4 IIA, E4 IIB, E4 IIC, and E4 IID) as
described below. Please do not use your model (version) of transmitter in regions it was not
designed for.
For information on other areas where the transmitter can be used, contact a Canon Service
Center.
In France, outdoor use is prohibited.
In mainland China, outdoor use requires a permit in some areas.
IEEE 802.11a Restrictions
When IEEE 802.11a wireless networking is used, channels in gray in the following table cannot
be used. These restrictions are established by local regulations, which must be upheld.
The transmitter can be used on channels in blue. Regarding channels in yellow, some
restrictions apply. Refer to the footnotes.
Areas of Use and Restrictions
Model
(Version) Area of Use Wireless LAN Specification and Supported Channels
WFT-E4 IIA United States, Canada, Singapore, and Hong Kong IEEE 802.11a 36 – 64 ch
149 – 165 ch
IEEE 802.11b/g 1 – 11 ch
WFT-E4 IIB
Japan, France, Italy, Germany, United Kingdom, Belgium,
the Netherlands, Luxembourg, Ireland, Denmark, Greece,
Spain, Portugal, Austria, Finland, Sweden, Poland, Hungary,
Romania, Bulgaria, Czech Republic, Slovakia, Slovenia,
Estonia, Latvia, Lithuania, Cyprus, Malta, Iceland, Norway,
Switzerland, Liechtenstein, Australia, New Zealand, Russia,
and Hong Kong
IEEE 802.11a 36 – 64 ch
100 – 140 ch
IEEE 802.11b/g 1 – 13 ch
WFT-E4 IIC Mainland China and Hong Kong IEEE 802.11a 149 – 161 ch
IEEE 802.11b/g 1 – 13 ch
WFT-E4 IID Can be used in all areas noted above IEEE 802.11a Not supported
IEEE 802.11b/g 1 – 11 ch
Wireless LAN
Connection Method Channel
WFT-E4 IIA
Indoors Infrastructure 36 – 48 52 – 64 149 – 165
Ad hoc 36 – 48 52 – 64 149 – 165
Outdoors Infrastructure 36 – 48 52 – 64 149 – 165
Ad hoc 36 – 48 52 – 64 149 – 165
WFT-E4 IIB
Indoors Infrastructure 36 – 48 52 – 64 100 – 140
Ad hoc 36 – 48 52 – 64 100 – 140
Outdoors Infrastructure 36 – 48 52 – 64*J100 – 140
Ad hoc 36 – 48 52 – 64 100 – 140
WFT-E4 IIC 149 – 161*C
*J: In Japan, outdoor use on channels 52 – 64 is prohibited.
*C: In mainland China, outdoor use requires a permit in some areas.
COPY

9
Areas of Use and Restrictions
The following actions may be punishable under law. Disassembling or modifying the
transmitter, or removing the certification label on it.
Do not use the transmitter near other devices that emit radio waves, such as medical
equipment or electronic devices. The transmitter may interfere with operation of these
devices.
Use the transmitter only with a compatible EOS DIGITAL camera. Using it with incompatible
cameras may cause malfunction, accidents, and other problems not covered under
warranty.
Use the transmitter as a wireless or wired LAN device as described in this instruction
manual. If you use the transmitter for any other purpose, Canon cannot be held liable for
any loss or damage that may occur.
COPY

10
The following precautions are intended to prevent harm to you and others as well as damage to
equipment. Become familiar with the precautions before using the transmitter to ensure correct
and safe operation.
Be sure that you fully understand the safety precautions contained in the instruction manuals
for the battery, charger, and AC Adapter Kit before using them.
To prevent fire, excessive heat, chemical leakage, or explosion, follow these safety guidelines.
• Do not insert metallic objects between electrical contacts of the transmitter, accessories, or connecting cables.
Do not use the transmitter where there is flammable gas. There is a risk of explosion or fire.
If the transmitter is dropped and internal parts are exposed, do not touch the exposed parts. There is a risk of
electrical shock.
Do not disassemble or modify the transmitter. High-voltage internal parts may cause electrical shock.
Do not store the transmitter in dusty or humid places. There is a risk of fire or electrical shock.
Before using the transmitter on board airplanes or in hospitals, make sure use is permitted. Electromagnetic
waves emitted by the transmitter may interfere with instrumentation or medical equipment.
Do not leave the transmitter inside a vehicle in hot weather or near a heat source. The transmitter may become
hot and cause burns if touched.
Do not cover or wrap the transmitter with a cloth. This may trap heat inside, posing a risk of case deformation or
fire.
Do not use paint thinner, benzene, or other organic solvents to clean the transmitter. This poses a risk of fire and
may be hazardous to your health.
If the product malfunctions, becomes damaged, or requires repair, contact your dealer
or the nearest Canon Service Center.
The transmitter is a precision instrument. Do not drop it or subject it to shock.
The transmitter is not waterproof. Do not use it underwater.
Wipe off any moisture with a clean, dry cloth. If the transmitter has been exposed to salty air,
wipe it with a clean damp cloth after wringing it out to remove excess water.
Never leave the transmitter near any equipment that generates a strong magnetic field,
such as magnets or electric motors.
Do not leave the transmitter in excessive heat, such as in a vehicle in direct sunlight. High
temperature may damage the transmitter.
Do not wipe the transmitter using cleaners containing organic solvents. If the transmitter
becomes difficult to clean, take it to the nearest Canon Service Center.
To avoid corrosion, do not store the transmitter where there are strong chemicals, such as in
darkrooms or chemical labs.
Safety Warnings
Warning Preventing Serious Injury or Death
Caution Preventing Injury or Equipment Damage
Handling Precautions
COPY

11
Nomenclature
Ethernet RJ-45 port
<
USB > USB lamp
<
LAN > Network lamp
LCD panel
USB port
DC coupler
cord notch
Positioning pin
Attachment knob
Terminal cap holder
Positioning pin
Battery compartment
cover release lever
AF point selection/
Magnify button
Battery compartment
Battery lock lever
Tripod socket
Tripod screw AF start button
Battery compartment cover
Vertical-grip
<
ON / OFF > switch
Main dial
* Turn the attachment knob to remove.
Protective cover
AE lock/FE lock/
Index/Reduce button
Terminal
Shutter button
Hand strap mount
COPY

Nomenclature
12
Recording quality at [Rec. separately] setting
External media selection mark
External media connection indicator
Wired LAN connection
Wireless LAN connection
Battery level indicator
CF card loading indicator
CF card selection mark
LCD panel
Waterproof/dustproof USB cap
* Attach this cap before connecting the USB cable in rainy weather or under other adverse conditions.
COPY

13
Load a charged battery into the camera. Before attaching the transmitter to the camera, set the
camera’s power switch to <
OFF >. The transmitter does not have a power switch. It is turned on
and off in conjunction with the camera’s power switch.
Before removing the transmitter, set the camera’s power switch to < OFF >.
1Remove the terminal cap from the
camera.
Peel off the terminal cap on the camera bottom to
remove.
Attach the removed terminal cap to the
transmitter’s terminal cap holder.
2Attach the transmitter.
As shown in the figure, align the transmitter and
the camera, and turn the attachment knob to
attach to the camera.
Attaching to the Camera
COPY

14
Setting the vertical-grip < ON / OFF > switch to < ON >
enables the vertical-grip shutter button and other
controls. These controls for shooting can still be used
even when batteries are not loaded in the transmitter.
The Hand Strap E1 (sold separately) is attached as shown in the figure.
Vertical Shooting Controls
Attaching the Hand Strap E1
1 4
2 5
3 6
After the hand strap is attached, check that all the slack at the buckle is removed and that there is no
looseness at the buckle even when pulled tight.
COPY

15
Use one Battery Pack LP-E6 to power the transmitter. When replacing the transmitter’s battery,
be sure to first set the camera’s power switch to <
OFF > before opening the transmitter’s battery
compartment cover. In particular, if the battery compartment cover is opened without setting the
camera’s power switch to <
OFF > while external media, GPS device or Bluetooth unit is still
connected, you will need to reestablish the connection to the external media, GPS device, or
Bluetooth unit.
The transmitter’s battery is not included. Customers who do not have one should purchase it
separately.
1 Open the cover.
Slide the lever to open the cover.
2 Insert the battery.
Insert from the side with battery contacts.
Insert the battery all the way until it locks into
place.
3Close the cover.
Press the cover up until it clicks into place.
Installing and Removing the Battery
Installing the battery
COPY

Installing and Removing the Battery
16
The remaining battery power is displayed when the camera is turned on. A blinking battery icon
( ) indicates that the battery will be depleted soon.
Number of images that can be transferred Approx. number of images
Using a fully charged LP-E6. The number of images that can be transferred is nearly the
same at normal temperature (23°C / 73°F) and low temperature (0°C / 32°F).
When automatic transfer is performed during shooting of an image of approx. 6 MB under
conditions based on the CIPA (Camera & Imaging Products Association) test standards.
Fewer images can be transferred when transferring images over a wireless LAN.
Fewer images can be transferred when using bus-powered external media or GPS devices,
or when using Bluetooth units.
1Open the cover.
Slide the lever to open the cover.
2Remove the battery.
Press the battery lock lever in the direction of the
arrow to unlock, and then unload the battery.
To prevent a short-circuit, be sure to always attach
the protective cover to the battery.
Battery check
Icon
Level (%) 100 – 70 69 – 50 49 – 20 19 – 10 9 – 1 0
LAN At Normal Temperature (23°C / 73°F) At Low Temperature (0°C / 32°F)
Wireless LAN 2300 2200
Wired LAN 3000 2600
Removing the battery
COPY

17
When the AC Adapter Kit ACK-E6 (sold separately) is used, a household power outlet can be
used to power the camera without worrying about the battery level.
1 Connect the DC coupler plug.
Connect the DC coupler plug to the socket of the
AC adapter.
2Connect the power cord.
Connect the power cord as shown.
Insert the plug into the outlet.
After usage, unplug from the outlet.
3Insert the DC coupler.
Open the cover, and insert the DC coupler firmly
until the lock position.
4Close the cover.
Pass the cord through the groove while opening
the cap of the DC coupler cord notch, and then
close the cover.
Using a Household Power Outlet
Do not connect or disconnect the power cord while the camera’s power switch is set to < ON > or < >.
COPY

18
Click one of the following chapter titles to view the corresponding page.
Subsequent Organization of This Manual
1 Basic Network Settings (p.19)
2 Transferring Images to an FTP Server (p.33)
3 Remote Capture Using EOS Utility (p.47)
4 Remote Capture Using WFT Server (p.53)
5 Linked Shooting (p.65)
6 Managing Settings Information (p.69)
7 Using External Media (p.75)
8 Using GPS Devices (p.87)
COPY

19
Basic Network Settings
Complete the basic network settings by following transmitter connection
instructions on the camera menu screen.
COPY

20
The connection instructions help you follow the steps to connect the transmitter to an existing
wireless or wired LAN.
To connect to a wireless LAN, prepare the wireless LAN terminal (wireless LAN access point or
wireless LAN adapter) and computer in advance so that they are ready for you to connect the
transmitter to the wireless network. When configuring the basic network settings, bring the
transmitter within 3 m / 9.8 ft. of the wireless LAN terminal.
To connect to a wired LAN, use a LAN cable to connect the transmitter and computer. Set the
transmitter for connection to the wired network.
Wireless Transmission of Movie
Individual movie files are large, and wireless file transmission takes some time. When setting
up an environment for stable transmission to the wireless LAN terminal, refer to the information
on page 110.
Set up two or more EOS 5D Mark II cameras with attached transmitters.
Getting Ready
[FTP trans.], [EOSUtility], [WFTserver]
[LinkedShot]
COPY