Canvas DANVILLE CTCDAN30VNY User manual

ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference.
DANVILLE
30” (76.2 CM) HONEY OAK
BATHROOM VANITY
PRODUCT NO. 063-6344-6

We believe in the power of décor and its
ability to make up the fabric of your home.
That’s why CANVAS® collections draw
inspiration from Canadians and the way
they live.
From on-trend furniture pieces to holiday
décor and all your outdoor living essentials,
CANVAS® makes it easy to refresh your space
to reect your unique style and the way you
live every day.
We would love to hear from you and welcome
your thoughtful feedback. Visit our website
at canadiantire.ca to tell us about your
experience, and share your photos with us
using #myCANVASstyle.
Show us how you bring CANVAS® products
to life. We can’t wait to see!

Parts List 4
Before You Begin Assembly 9
Step-by-step Guide 11
Technical Data 21
Troubleshooting 22
Caring for Your Item 22
Warranty 23
TABLE OF CONTENTS
TOOLS REQUIRED
No. 2 Cross-head Screwdriver
Tip Shown Actual Size
NOTE: Do not over-drill/
be aware of over-drilling
• Pleasereadandunderstandthisentiremanualbeforeattemptingtoassemble,
operate,orinstalltheproduct.
• Anyassemblyormaintenanceoftheproductmustbecarriedoutbyadultsonly.
• Somepartsmaycontainsharpedges.Wearprotectiveglovesifnecessary.
• Topreventdamage,placeallpartsonalevelsurfaceduringassembly.Adda
layer of protective surface if needed.
• Donotallowyourchildrentoclimborjumponfurnitureduetopossible
accident,injuryordeath.Achildclimbingonapieceoffurniturecanmakeit
top-heavy and cause the furniture to tip over.
• Keepchildrenandpetsawayduringassembly.
• Repairingandreplacingpartsshouldbedonebyaqualiedtechnician.
• Thisunitisintendedforuseonlywithinthemaximumweightindicated.Use
withloadsheavierthanthemaximumweightindicatedmayresultininstability
causingpossibleinjury.
• Failuretofollowthesewarningscouldresultinseriousinjury.
WARNING!TOREDUCETHERISKOFSERIOUSINJURY,
READTHEFOLLOWINGSAFETYINSTRUCTIONSBEFORE
ASSEMBLINGANDUSINGTHEPRODUCT.
HexWrench 2 People

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY4
PARTS LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
7 LowerBackStretcher 1
8 UpperFrontStretcher 1
9 MiddleFrontStretcher 1
10 BottomFrontStretcher 1
11 Bottom Panel 1
12 AdjustableShelf 1
13 BackPanel 1
1 Backsplash 1
2Vanity Top 1
3Side Panel Left 1
4Side Panel Right 1
5 UpperBackStretcher 1
6 MiddleBackStretcher 1

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY 5
PARTS LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
20 Drawer Bottom 1
14 Left Door 1
15 Right Door 1
16 DrawerFront 1
17 Drawer Left 1
18 Drawer Right 1
19 DrawerBack 1

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY6
EXPLODED PARTS
1
2
13
3
4
5
12
6
11
7
10
9
8
14
15
16
17
19 18
20

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY 7
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
A LargeCamLock 20
BLarge Cam Bolt 20
G M4x12mmScrew 36
H M3.5x15mmScrew 20
C M8x30mmWoodDowel 22
D 1/4”x32mmBolt 4
E M4x25mmScrew 6
F HandlewithBolts 3
I M3.5x12mmScrew 4

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY8
HARDWARE LIST
ITEM DESCRIPTION THUMBNAIL QUANTITY
J SmallCamLock 4
KSmall Cam Bolt 4
PTouch-up Pen 1
QGlue 1
LStraightArmSlowCloseHinge 6
MLeveller 4
NShelf Support 4
O HexWrench 1
R M4x50mmScrew 2
SPlastic anchor 2

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY 9
BEFORE YOU BEGIN ASSEMBLY
MAKE SURE ALL PARTS ARE PRESENT
Compareallpiecestothepartsandhardwarelists,and
makesureyouhavealltoolsrequiredforassembly.
REMOVE PACKAGING MATERIALS
Placepackingmaterialsbackinthebox.Donotdisposeof
packagingmaterialsuntilassemblyiscomplete.
READ EACH STEP CAREFULLY
Makesureyouunderstandeachstep.Ifyouhaveanyquestions,
contact CANVAS®customer service at 1-888-670-6684 (toll free).
ASSEMBLE IN A CLEARED AREA
Placeallpartsfromtheboxontheoorinfrontofyouonaclean,
dry,levelsurfacetoprotecttheproductasitisbeingbuilt.

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY10
BEFORE YOU BEGIN ASSEMBLY
CAM LOCK SYSTEM OPERATION
NOTE:ITISVERYIMPORTANTTOUSEGLUEWITHDOWELS.EXCESSGLUECAN
BEWIPEDOFFWITHDAMPCLOTH.
InsertdowelatleasthalfwaybytappinglightlywitharubbermalletIFNECESSARY.
GLUE
X
X
1 4
3
2
HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS
1.Screwcamboltintothepre-drilledsmallholesonpanel.Alignthepanelstobejoined
so that the cam bolt goes into the pre-drilled hole on the edge of the second panel and
protrudesintotheholethatwillhousethecamlock.
2.Insertthecamlockintopre-drilledlargeholeonpanel.Makesurearrowonthecam
lockispointedtowardthecambolt.
3.Oncethecamboltisconnectedinsidecamlock,takeacross-headscrewdriverand
tightenthecamlockbyturningclockwise.
You are now ready to assemble the product.

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY 11
STEP-BY-STEP GUIDE
17 X119 X120 X1EX4FX1 16 X118 X1
LX2 GX4
16 16
20
19
G
L
17
18
F
E
J
K
STEP 1
KX4 JX4
Attach straight arm slow close hinge L to drawer front 16usingM4x12mmscrewsG.
Remove preassembled bolt from handle F. Insert drawer handle F to drawer front
16,securingwithpreviouslyremovedbolts.
Attach drawer left 17 and drawer right 18 to drawer front 16usingsmallcamlocksJ
and small cam bolts K. Insert drawer bottom 20 into drawer left 17,drawer right 18
and drawer front 16.
Insert drawerback 19 into drawer left 17 and drawer right 18,securingwith
M4x25mmscrews E.
Note:Makesuresmall cam bolts Kare completely seated.

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY12
STEP-BY-STEP GUIDE
15 X1GX8LX4 14 X1FX2
14
15
F
G
L
STEP 2
Attach straight arm slow close hinge Lto left door 14 and right door 15 using
M4x12mmscrewsG. Remove preassembled bolt from handle F. Attach drawer
handle F to left door 14 and right door 15,securingwithpreviouslyremoved
bolts.

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY 13
STEP-BY-STEP GUIDE
7X110 X1 6X111 X1AX4CX4 BX4
EX2
6
11 11
7
10
E
A
C
CB
STEP 3
Attachmiddlebackstretcher6to bottom panel 11usingM4x25mmscrewsE.
Then,attachlowerbackstretcher7and bottom front stretcher 10 to bottom panel
11usinglargecamlocksA,largecambolts BandM8x30mmwooddowelsC.
Note:Makesurelarge cam bolts Bare completely seated.

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY14
STEP-BY-STEP GUIDE
4X1 3X1
A
BX16
DX4 CX18
A
B
CBC
4
3
5
911
8
D
OX1
STEP 4
5X19X1 8X1AX16
Attach upperbackstretcher5,upper front stretcher 8,middle front stretcher 9and
bottom panel assembly to side panel left 3and side panel right 4using large cam
locksA,largecambolts B,M8x30mmwooddowelsCand 1/4”x30mmboltsD.
Note:Makesurelarge cam bolts Bare completely seated.

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY 15
STEP-BY-STEP GUIDE
HX20 13 X1
C
M
13
STEP 5
MX4
Attachbackpanel13tothebackofthevanityassembly usingM3.5x15mmscrewsH.
Attach levellers Mto the bottom corners of the vanity assembly.

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY16
STEP-BY-STEP GUIDE
15 X1 14 X1
3
G
14
15
4
STEP 6
GX24
Attach left door 14,rightdoor15 and the drawer assembly to the vanity assembly
withM4x12mmscrewsGusing the pilot holes as a guide.
Openandclosethedoorstomakesuretheyarealignedandshutcorrectly.If
necessary,adjustthescrewsforagoodt.

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY 17
STEP-BY-STEP GUIDE
IX4 12 X1
12
3
N
I
NX4
N
STEP 7
Insert shelf support Nintothedesiredholesinthesidesofeachcompartment.Make
sure you place the shelf supports at the same level so the shelf is not tilted.
Tiltandrestadjustableshelves12 onto shelf supports N.SecureusingM3.5x12mm
screws I.

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY18
STEP-BY-STEP GUIDE
RX2SX2
Determinewherevanityistobeplacedandmarklocationonthewallforthe
mounting.
Drill a 3/8” hole in the wall. Press the plastic anchor Sinto the hole and gently tap
untiltheangeoftheanchorisagainstthewallsurface.
AttachVanitytothewallusingM4x50mmscrewsR.
3
R
S
STEP 8

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY 19
STEP-BY-STEP GUIDE
2X1
2
Silicone (NOT Provided)
3
STEP 9
Apply silicone around the top edge of vanity assembly to secure the vanity top 2.

DANVILLE 30” (76.2 CM) HONEY OAK BATHROOM VANITY20
1X1
1
Silicone (NOT Provided)
3
STEP-BY-STEP GUIDE
STEP 10
Applysiliconealongthebottomedgeofbacksplash1and attach it to vanity
assembly.