Canvas AXEL 168-0005-2 User manual

AXEL 4-DOOR CABINET
MODEL NO. 168-0005-2
ASSEMBLY INSTRUCTIONS
Toll-free: 1–888–670–6684
IMPORTANT: Please read and understand this manual before beginning assembly of the
product, and make sure all parts are present. Compare parts with packaging contents
list. If any part is missing, or if you have any questions, contact the service centre at
1–888–670–6684 (toll free).

Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8

I
3
IMPORTANT SAFETY INSTRUCTIONS
Table of Contents 3
Important Safety Instructions 3
Parts List 4
Assembly 6
17
Technical Specifications
17
Warranty
IMPORTANT: Retain for future reference, and read carefully.
I
I
D
.
I
D
I
TOP
FENCE
I
TOP
FENCE
• This product is intended for indoor use.
•The product should be placed on flat, horizontal ground.
• Any assembly or maintenance of the product must be carried out by adults only.
•Plastic bags can be dangerous. To avoid danger of suocation keep all bags
away from babies and children.
TABLE OF CONTENTS
Warning! To reduce the risk of serious injury, read the following safety
instructions before assembling and using this product.

4 MODEL NO. 168-0005-2
PARTS LIST
Fixed shelf - 1
Adjustable shelf - 3
Lower left side frame - 1
Lower right side frame - 1
Connecting tube - 1
Upper connecting tube - 1
Upper left side frame - 1
1
Bottom - 1
3
Lower connecting tube - 1
2
4
5
6
7
8
9
10
Upper right side frame - 1
Top - 1
Lower back panel - 1
Lower left door panel - 1
11
Middle back panel - 3
13
Upper back panel - 1
12
14
15
Lower right door panel - 1
16
Upper left door panel - 1
17
Upper right door panel - 1
18

5
Hex wrench - 1
Screw 4 x 12 mm - 21
Fabric strip - 2
Hinge - 8
Screw 4 x 14 mm - 36
Door bolt - 2
A
Bolt M6 x 15 mm - 10
C
Bolt M6 x 35 mm - 12
B
D
E
F
G
H
I
J
Wall anchor - 2
PARTS LIST
K
Metal washer - 23
Screw 3.8 x 30 mm - 2

•
•
•
•
HELPFUL HINTS
Read each section carefully before starting. It is very important that each step is performed in
the correct order. If these steps are not followed in sequence, assembly diculties will occur.
Make sure all parts are included. Most board parts are labelled or stamped on the raw edge.
Work in a spacious area, preferably on a carpet, near the place the unit will be located.
Do not use power tools to assemble your furniture. Power tools may strip or damage the parts.
• Identify, sort and count the parts before beginning assembly.
• Compression dowels should be tapped in with a rubber mallet.
• Slides have a lip on the right side only.
• Back panels provide stability and support. Unit may collapse without the back panel installed.
• Clean the product with your choice of furniture polish and a soft cloth. DO NOT USE harsh
chemicals nor abrasive cleaners.
• Move your new furniture carefully. Two people are needed to lift and carry the unit to its new
location.
• Never push nor drag your furniture (especially on a carpet).
Needed for assembly:
Star-head
screwdriver
2 people
6 MODEL NO. 168-0005-2
ASSEMBLY

7
ASSEMBLY
I
D
.
I
D
.
Step 1
Requires 1, 2, A, C
Step 2
Requires 2, 3, A, B
A C
Attention: In order to help your assembly, do not lock the screw tightly until you have assembled all
the other parts.
A
C
C
1
2
A B
A B
2
3

A B C
C
8 MODEL NO. 168-0005-2
I
D
.
I
D
.
Step 3
Requires 3, 6, A, B, C
Step 4
ASSEMBLY
Requires 3, 5, 7, A, B, C
A
B
B
3
6
A B C
C
C
B
B
B
B
5
3
7
A
C

9
ASSEMBLY
I
D
.
I
D
.
Step 5
Requires 5, 8, 9, 10, A, C
A
A
C
C
5
8
9
10
A C
C

Step 6
Requires 11, A, B
10 MODEL NO. 168-0005-2
I
D
.
I
D
.
ASSEMBLY
A
A
B
9
11
A B