Caraudio-Systems RL-LR17-TF User manual

Version 13.11.2018 RL-LR17-TF
Camera interface
RL-LR17-TF
Rear-view camera-input
and
video-in-motion
compatible with Land Rover
INCONTROL TOUCH (8”) system
from model 2017
Only for vehicles WITHOUT factory rear-view camera

Version 13.11.2018 RL-LR17-TF
Page1"
Contents
1. Prior to installation
1.1. Delivery contents
1.2. Check compatibility of vehicle and accessories
1.3. Setting the DIP-switches of the CAN-Box RLC-TV517
1.4. Pin-assignments
2. Connection schema
3. Installation
3.1. Interconnecting CAN-box, harness and factory navigation monitor
3.2. Connection to rear-view camera
4. Activation of the video-in-motion function
5. Specifications
6. Technical support
Legal Information
By law, watching moving pictures while driving is prohibited, the driver must not be
distracted. We do not accept any liability for material damage or personal injury resulting,
directly or indirectly, from installation or operation of this product. This product should only
be used while standing or to display fixed menus or rear-view-camera video when the
vehicle is moving, for example the MP3 menu for DVD upgrades.
Changes/updates of the vehicle’s software can cause malfunctions of the interface. We
offer free software-updates for our interfaces for one year after purchase. To receive a free
update, the interface must be sent in at own cost. Labor cost for and other expenses
involved with the software-updates will not be refunded.

Version 13.11.2018 RL-LR17-TF
Page2"
1. Prior to installation
Read the manual prior to installation. Technical knowledge is necessary for installation. The
place of installation must be free of moisture and away from heat sources.
1.1. Delivery contents
1.2. Check compatibility of vehicle and accessories
CAN-box RLC-TV517
HW_____ SW_____
Take down the SW-version and HW-version of the interface boxes, and store this
manual for support purposes.
Adapter
CAB-LR15-R
Requirements
Vehicle Land Rover vehicles from year 2017
Navigation INCONTROL TOUCH (8” screen)
Limitations
After-market rear-view Only compatible with NTSC-cameras.
camera
Harness
TV-LR05

Version 13.11.2018 RL-LR17-TF
Page3"
1.3. Setting the DIP switches of the CAN-box RLC-TV517
Vehicle/ navigation DIP 1 DIP 2 DIP 3 DIP 4 DIP 5 DIP 6
Video-in-motion permanent ON OFF OFF OFF ON ON
Video-in-motion selective* OFF OFF OFF OFF ON ON
* With DIP1 to OFF the included green cable is used to activate the video-in-motion function
Note: DIP switch functions of the RLC-TV517
DIP 1 – activation TV-free
DIP 2 – no function
DIP 3 – no function
DIP 4 – no function
DIP 5 – CAN-bus termination resistor on the vehicle side
DIP 6 – CAN-bus termination resistor on the head-unit side

Version 13.11.2018 RL-LR17-TF
Page4"
1.4. Pin-assignments
Pin assignment quadlock connector
No liability for vehicle wire colors and pin definition! Possible changes by the vehicle
manufacturer. The given information must be verified by the installer.
Pin-assignment of the CAN-Box RLC-TV517 (Molex 8pin)
Cable colour Pin-No. Assignment
● Yellow Pin 4 CAN-HIGH – connection to the head-unit
● Blue Pin 3 CAN-LOW – connection to the head-unit
●● Yellow/Black Pin 8 CAN-HIGH – connection to the vehicle
●● Blue/Black Pin 7 CAN-LOW – connection to the vehicle
● Red Pin 1 +12V permanent
● Black Pin 5 Ground
● Green Pin 6 Activation of the video-in-motion function
(+12V = TV-free activated)
● White Pin 2 No function
Function Pin-No.
CAN-HIGH Pin 3 (chamber B)
CAN-LOW Pin 9 (chamber B)
+12V permanent Pin 13
Ground Pin 11

Version 13.11.2018 RL-LR17-TF
Page5"
2. Connection schema

Version 13.11.2018 RL-LR17-TF
Page6"
3. Installation
Switch off ignition and disconnect the vehicle’s battery! If according to factory rules
disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in
sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
Place of installation is on rear of the head unit.
3.1. Interconnecting CAN-Box, harness and factory head unit
Connect female 8pin Molex connector of harness TV-LR05 to male 8pin Molex
connector of CAN-box RLC-TV517.
Transfer Quadlock connector of vehicle harness from rear of the head unit into male
Quadlock connector of harness TV-LR05.
Plug female Quadlock connector of harness TV-LR05 into male Quadlock socket
on the rear of the head unit.
Interface -box
RLC-TV5 1 7
Quadlock female
vehicle harness
Harness
TV-LR05
Rear side of
head onit
1
2
3

Version 13.11.2018 RL-LR17-TF
Page7"
3.2. Connections to rear-view camera
If existing, disconnect the original blue double Fakra socket from the Head Unit and
connect it to the double Fakra male plug of adapter CAB-LR15-R.
Connect the double Fakra socket of adapter CAB-LR15-R to the double blue Fakra-
connector on the rear of the head unit.
Connect the video RCA of the rear-view camera to the female RCA connector of
adapter CAB-LR15-R.
Note: Only compatible with NTSC-cameras.

Version 13.11.2018 RL-LR17-TF
Page8"
4. Activation of the video-in-motion function
The video-in-motion can be activated and deactivated by DIP 1 or alternatively by the
included loose green cable in connection with a switch (not included in delivery).
Video-in-motion permanent
With DIP1 to ON the video-in-motion function is activated permanently without disturbing
the navigation performance.
Video-in-motion selective
With DIP1 to OFF the included green cable is used to activate the video-in-motion function.
Connect a switch to the green cable and connect the green cable to +12V ACC.
● +12V = TV-Free is activated
● 0V = TV-Free is not activated
Note: The loose white cable is not required and must be isolated.
5. Specifications
Operation voltage 10.5 – 14.8V
Stand-by power drain <2mA
Operation power drain ~60mA
Power consumption ~0,08W
Temperature range -30°C to +80°C
Weight 44g
Measurements (box only) W x H x D 70 x 20 x 47 mm/ 76 x 27 x 54 mm
6. Technical support
Caraudio-Systems Vertriebs GmbH
manufacturer/distribution
In den Fuchslöchern 3
D-67240 Bobenheim-Roxheim
email [email protected]
Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered
trademarks ® of their corresponding legal owners.