Carlo De Giorgi 661/00 User manual

Manuale di Istruzioni
Instruction Manual
Gebrauchs Anweisungen
Mode d’Emploi
Manual de Manejo
Minibox EMC
Via Tonale, 1 – 20021 Baranzate (MI) – Italy
Tel. [phone] r.a. – Fax [phone]

Dati modello
Model data / Donnés du modèle / Modelldaten / Datos del modelo
Tipo Alimentazione Anno di costruzione
Model
Modèle
Modell
Modelo
Power supply
Alimentation
Betriebs-spannung
Alimentación
Year of manufacture
Année de fabrication
Baujahr
Año de fabricación
661/00 230 V 50 Hz

2016

2017

2018

2019

2020

CE DECLARATION OF CONFORMITY
The undersigned:
CARLO DE GIORGI S.r.l.
Via Tonale, 1
20021 BARANZATE (MI) - I
declares, under its own responsibility, that the device:
Type: MINIBOX EMC
described as:
Portable dust aspirator, specifically designed for bench finishing
for metals, ceramics and resins,
conforms to the Laws implementing the requirements of the "Low
Voltage Directive" 2014/35/UE, the "Electromagnetic
Compatibility" Directive 2014/30/UE and the RoHS Directive
2011/65/UE, in accordance with the applicable technical
standards EN ISO 12100, EN 61010-1, EN 61029-1, EN 61029-
2-4, EN 60326-1, EN 55014-1, EN 55014-2.
Date: 01/10/2016
Signed: De Giorgi Ariberto
CEO
Person authorized to compile the technical file:
Ariberto De Giorgi
Presso Carlo De Giorgi S.r.l.
Via Tonale 1
20021, Baranzate, Milano, Italy

Instruction Manual
Minibox EMC

Choosing this apparatus you have purchased a particularly reliable unit that will facilitate
your work.
This unit complies with the directives 89/392/CE, therefore CE mark is admitted:
Do follow carefully all the indications brought back in this manual. During all the
maintenance operations disconnect the power cord from the electrical outlet, and/or
disconnect the compressed air and/or the water attack and/or other attacks of external
parts to the apparatus. Do not introduce stranger objects inside the unit during the
maintenance operations. Use only the accessories in equipment for the filling operations
and/or maintenance. Do not execute different operations of maintenance from those
brought back in the manual. Whichever operation not contempled in this manual, can
involve risks. For operations of this type, contact the technical service. Before turning on
the unit and connecting the power cord to the electrical outlet, make sure that the voltage
corresponds to the one brought back on the fabrication nameplate placed on the back part
of the apparatus.
•
•
ENGLISH

MINIBOX EMC – FINISHING SUCTION UNIT
UNPACK
Verify integrity of the pack at the moment of the reception of the apparatus. Verify on the
back side the yellow adhesive nameplate QUALITY CONTROL PASSED the control code
is integral. Verify that in the packaging all the parts and the supplied accessories of series
are contained together with the apparatus: power cord, suction hose and connection, pack
of filters MINIBAG, user’s documentation and warranty.
INSTALLATION
Take the suction unit out of the packaging and place it where can be easily inspected for
the replacement of the recovery filter of powders MINIBAG (rif. 10) and for the periodic
substitution of the filter for motor protection (rif. 7-8-9).
.
Connect the power cord (ref. 13) to a power outlet (absorption max 1.500 W).
ATTENTION: make sure that the voltage corresponds to the one brought back on the
fabrication nameplate placed on the apparatus.
Connect the micromotor’s plug to the Minibox EMC (ref.19) –
Connect one side of the suction hose (ref. 3) where you need to have the aspiration:
(AIRBASE 662/00 – SUCKY 658/00 – MICROBOX 663/00), or to your bench.
After these operations, the suction unit is now ready to work: turn on the apparatus by
pressing the general switch (ref. 16) and regulate the aspiration power acting on the
power regulator (ref. 15) min 300 W - max 600 W.

Control the bag of used powders every 4/5 days and replace it before completely full (max
to approximately 2/3 of its capacity). Do not re-use and do not empty out the used filters.
When the filter is exausted close it with a proper adhesive tape and waste appropiately in
compliance with your country rules.
Check every two weeks the motor protection filter and clean it by blowing compressed air
in the same way of passage of the sucked air. The filter must be replaced with a new one
at least every 4 months. This preserves the motor and the perfect operating of the
apparatus.
1. Control that the power cord plug (rif. 13) is properly connected to the electrical outlet.
1. Replace the recovery dust filter (rif.10), and/or replace the motor protection filter (rif.7-
8-9).
Carried out these controls, in case the apparatus still presents disadvantages, contact the
customers’ technical service.
Operating voltage V/Hz 230/50-60 (see nameplate on the apparatus)
Weight Kg. 3,5
Height cm. 25 Width cm. 29 Depth cm. 25