1. SOUNDER INTRODUCTION
The Cartell sounder plugs into a standard Type A North American outlet.
If part of a system, one sounder comes factory-paired to one sensor. If bought as an
sounder will be put in pairing mode by default.
2. PAIRING SOUNDER WITH SENSOR(S)
2.
5. Scroll to sound menu and choose sound for that sensor.
4.
You can pair an unlimited number of sounders with up to 30 sensors.
1.
PAIRING ONE SOUNDER TO MULTIPLE SENSORS
3.
sensor has a number.
3.
4.
ERASE ALL PAIRED SENSORS FROM SOUNDER
1.
1.
+
2.
+
2.
+
CW-SOU WIRELESS SOUNDER INSTRUCTIONS
VERSION 1 - SEPTEMBER 2023
PAIRING SOUNDER TO A SENSOR MANUFACTURED BEFORE SEPTEMBER 1, 2023
NOTE: SOUNDER IS IN AUTOMATIC PAIRING MODE WHEN SHIPPED FROM THE FACTORY. SIMPLY PLUG IT IN.
PAIRING SOUNDER TO A SENSOR MANUFACTURED AFTER SEPTEMBER 1, 2023
A C
POWER
LED
Normal: blinks
Triggered: solid
BUTTONS
Volume
−down
+up
Menu
−cycle thru
+ choose
1.
3.
2.
4.
5. Wipe sensor lid and lip with a clean cloth and screw lid to the sensor, making sure the bosses line up correctly.
5. Wipe sensor lid and lip with a clean cloth and screw lid to the sensor, making sure the bosses line up correctly.
3. SOUNDER & REPEATER MODES
In sounder
In repeater mode, the sounder does not make sounds when a sensor event is received. Instead, it repeats the event to another
equipment.
IC Cauon (Canada):
4. FCC WARNING
E3957
AUSTRALIA
FCC ID #:
2AUXCCWSOU
& 2AUXCCWSN (U.S.)
IC#: 25651-CWSOU &
25651-CWSN (Canada)
