CaryMart S2DA-DC09 User manual

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
carymart
.com
E
-
Mail:sale@
carymart
.com
RFWireless Remote Control RadioController/ Transmitter& Receiver
PackageInclude:
1xReceiver: S2DA-DC09 /S2DA-DC12 / S2DA-DC24 (2 Channel/ DelayControlMode)
2xTransmitter: C-4
1xUser manual
Feature:
Wireless control,easy toinstall
Adjustabledelay time: 0seconds ~99 hours
ControlLights,Motors,Fans, electricallyoperated Doors /Locks/Windows / Blinds/Cars or Other Appliances.
You canturnon/offthereceiver withtransmitter (remotecontrol)fromanyplacewithinareliabledistance;thewirelesssignalcanpass through
walls, floors and doors.
Withcharacteristics of reversepower protection and over currentprotection
Audible/ visualindication
Usemicrocontroller modelof EM78P156, an 8-bitmicroprocessor designed and developed withlow-power and high-speed CMOS technology.
UseULN2003 todriverelay, withstrong anti-interference.
Reliablecontrol: The transmitter (Encoding) and the receiver (Decoding) usean8-bitcode.
One/severaltransmitterscan controlone/severalreceiverssimultaneously.
If you usetwoor more receiversinthe sameplace, you can setthemwithdifferentcodes.
Transmitting Frequency: 315MHz /433MHz
Receiver:
ModelNo.: S2DA-DC09 /S2DA-DC12 / S2DA-DC24
Channel: 2CH
ControlMode: Delay(Press ->ON;ThenOFFafter thedelaytime)
Adjustabledelay time: 0seconds ~99 hours
Coding Type: Fixed code or Learning code
Coding Setting:Bylearning
Power Supply(Operating Voltage): DC12V 1V (S2DA-DC12), DC9V 1V (S2DA-DC09), DC24V 1V (S2DA-DC24)
Working Voltage Range of Relay:AC110~240V or DC0~28V
PCBsize:93.5mm x73mm x27mm
Casesize: 100mm x77mm x30mm
MaximumWorkingCurrent: 10A/ eachchannel
Transmitter:
ModelNo.: C-4
Channel: 4CH
RemoteControlDistance: 100m/ 300ft (theoretically)
Encode:Fixed code by soldering
Unitsize: 58mm x39mm x16mm
Power Supply: 1x23A-12V battery(Included,canbe used for12 months)
Usage:
Initialstate:A,B =NormallyClosed; B, C=NormallyOpen.
1) Press button 1:Turn onrelay1(connectBand C,disconnect AandB).
Afterdelaytime:Turn off relay1byitself (disconnectB and C,connect Aand B).
Press button 3:Turn off relay1immediately,no need towait for delaytime.
2) Press button 2:Turn onrelay2(connectBand C,disconnect AandB).
Afterdelaytime:Turn off relay2byitself (disconnectB and C,connect Aand B).
Press button 4:Turn off relay2immediately,no need towait for delaytime.
Pressbuttonsof “”and “－”onthe timer,adjustdelaytimefrom0secondto99hours.Twobuttonsof Timer 1adjustdelaytimeofrelay1;two
buttonsofTimer 2adjust delay timeof relay2. “H”is Hour, “M”is Minute, and “S”isSecond.
For example,ifyou set “10M03”on Timer,it meansthe delay timeon Timer 1is3minutes;thedelay timeon Timer2is 10minutes.
Wehavelearned remotecontroltothe receiver. If you don’t wantthe receiver towork withtheremotecontrol, you can deleteallcodesofremote
controls,whichare stored inthe receiver.
Operation:Press andholdthe button of receiver untilsignalLEDflashesslowly; releasethe button,LEDkeeps slowflash.That meansallstored
codeshavebeen deleted successfully.
Learning the button ofremotecontrol:
1) Pressthe button of receiver;signalLEDonthe receiver keepsshining.Thereceiver enters intostatus ofLEARNING.
2) Press anyone buttonon remotecontrol.IfsignalLEDflashesquickly15 times and turnsoff,it means learning issuccessful.
3) Whenreceiver is inthestatus of LEARNING, pressagainthe button of receiver, signalLEDturns off, learning process will be discontinued.

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
carymart
.com
E
-
Mail:sale@
carymart
.com
4) The receiver can learn severalremotecontrols withdifferent codes.
Application Circuit
A, B=NormallyClosed;B, C=NormallyOpen.
Button
Antenna
RFmodule
IC
SignalLED
PowerLED
Powersupply
Timer
+
+
+
+
_
_
_
_
DC0~28V/AC110~240V
Lamp
Relay1
A
B
C
Relay2
A
B
C
LED1
LED2
Lamp
0
M
3
0
1
+
+
_
_
Timer2
Timer1