SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
RFWireless Remote Control RadioController/ Transmitter& Receiver
PackageInclude:
1xReceiver: S1DA-DC09-ANT2/S1DA-DC12-ANT2/S1DA-DC24-ANT2(1 Channel/ DelayControlMode)
1xTransmitter: CB-2
1xUser manual
Feature:
Wireless control,easy toinstall
Adjustabledelay time: 0seconds ~99 hours
ControlLights,Motors,Fans, electricallyoperated Doors/ Locks/Windows/ Blinds/Cars orOtherAppliances.
You canturnon/offthereceiver withtransmitter (remotecontrol)fromanyplacewithinareliabledistance;thewirelesssignalcanpass through
walls, floors and doors.
Withcharacteristics of reversepower protection and over currentprotection
Audible/ visualindication
Usemicrocontroller modelof EM78P156, an 8-bitmicroprocessor designed and developed withlow-power and high-speed CMOS technology.
UseULN2003 todriverelay, withstrong anti-interference.
Reliablecontrol: The transmitter (Encoding) and the receiver (Decoding) usean8-bitcode.
One/severaltransmitterscan controlone/severalreceiverssimultaneously.
If you usetwoor more receiversinthe sameplace, you can setthemwithdifferentcodes.
Transmitting Frequency: 315MHz /433MHz
Working distanceoftransmitter andreceiver withexternalextend antenna: 2000M/ 6000ft (theoretically)
Receiver:
ModelNo.: S1DA-DC09-ANT2/S1DA-DC12-ANT2/ S1DA-DC24-ANT2
Channel: 1CH
ControlMode: Delay(Press ->ON;ThenOFFafter thedelaytime)
Adjustabledelay time: 0seconds ~99 hours
Coding Type: Fixed code or Learning code
Coding Setting:Bylearning
Power Supply(Operating Voltage): DC12V 1V (S1DA-DC12-ANT2),DC9V 1V(S1DA-DC09-ANT2), DC24V 1V(S1DA-DC24-ANT2)
Working Voltage Range of Relay:AC110~240V or DC0~28V
PCBsize:93.5mm x73mm x27mm
Casesize: 100mm x77mm x30mm
MaximumWorkingCurrent: 10A
ExternalExtendAntenna:
FrequencyRange: 300~450MHz
Impedance: 50Ω
Antenna Length: 15cm
CableLength: 150cm
Weight:35g
Anti-interference,waterproof, shielded wire set inside
Magneticstand design for easytoinstall
Transmitter:
ModelNo.: CB-2
Channel: 2CH
RemoteControlDistance: 1000m/3000ft (theoretically)
Encode:Fixed code by soldering
Unitsize: 135mm x42mm x25mm
Power Supply: 1x6F22-9V battery(included,canbe usedfor 12months)
Usage:
Initialstate:A,B =NormallyClosed; B, C=NormallyOpen.
Press bigbutton:Turn onrelay(connect B andC, disconnectAand B).
Afterdelaytime:Turn off relayby itself (disconnectBand C,connectA and B).
Presssmallbutton: Turnoff relayimmediately, no need towaitfor delaytime.
Press buttonsof “”and “－”on the timer,adjust delay timefrom0second to99hours. “H”is Hour, “M”is Minute,and “S”isSecond.
For example,ifyou set “S01”,itmeansthe delay timeis 1second.
Wehavelearned remotecontroltothe receiver. If you don’t wantthe receiver towork withtheremotecontrol, you can deleteallcodesofremote
controls,whichare stored inthe receiver.
Operation:Press andholdthe button of receiver untilsignalLEDflashesslowly; releasethe button,LEDkeeps slowflash.That meansallstored
codeshavebeen deleted successfully.
