Cascadia Digital Video Recorder User manual

www.cascadiadvrt.com / [phone]
1
Please read these instructions and save this manual for future use
DIGITAL VIDEO RECORDER
Server
Operation Manual
PXE Series

www.cascadiadvrt.com / [phone]
2
SAFETY INSTRUCTIONS
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide
blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles
and the points where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
WARNING:
To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus shall
not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed
on the apparatus.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense
IMPORTANT The only way to disconnect power completely is to unplug the power cord
Make sure at least one end of the power cord is within easy reach so that you can unplug the computer when
you need to
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED REPLACE ONLY WITH THE SAME
OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER DISCARD USED BATTERIES ACCORDING TO
THE MANUFACTURER’S INSTRUCTIONS
THIS PRODUCT HAS MULTIPLE-RATED VOLTAGES.
ADJUST POWER INPUT SELECTOR SWITCH PROPERLY ON REAR OF UNIT BEFORE CONNECTING TO
THE POWER SUPPLY.

www.cascadiadvrt.com / [phone]
3
Table of Contents
CHECK ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
ETC ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
DISK ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
UPGRADE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
TIME ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
284. A/S SETUP ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
29
29
29
29
29
12PTZ ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
13CONTROL ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
14V-OUTPUT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
14LOG VIEW ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
24USER ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
25POS ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
26SYSTEM ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
19SENSOR ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
20ALARM ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
21NETWORK ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
23STORAGE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
153. SETUP ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
16CAMERA ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
17RECORD ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
18SCHEDULE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
19MOTION ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
82. DISPLAY ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
10SYSTEM ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
11DISPLAY ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
12AUDIO ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
12ALARM ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
8REAR VIEW ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
7FRONT VIEW ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
61. LAYOUT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

www.cascadiadvrt.com / [phone]
4
Table of Contents (cont.)
TEXT SEARCH ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
SMART SEARCH ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
NORMAL SEARCH ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
408. QUICK USE 3 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
41
42
43
SCHEDULE RECORDING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
MANUAL RECORDING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
377. QUICK USE 2 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
38
39
HOW TO UPGRADE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ 36
SMART ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
EXPORT AVI ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
EXPORT IMG ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
VIDEO MAP ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
CALENDAR ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
305. SEARCH ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
31
31
32
32
32
54USER PASSWORD SETTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
4710. QUICK USE 5 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
48IP SETTING/CONNECTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
50DDNS/WEB VIEWER CONNECTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
51PDNS CONNECTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
53E-MAIL SETTING/NOTIFICATION ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
449. QUICK USE 4 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
45JPG, BMP, AVI SAVE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
46BACKUP ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
35DVR/REMOTE CONTROLLER ID SETUP ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
34TIME/DATE ADJUSTMENT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
336. QUICK USE 1 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

www.cascadiadvrt.com / [phone]
5
Table of Contents (cont.)
63POS SETTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
73PRINT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
61PTZ CONNECTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
SEARCH ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
7014. CLIENT SEARCH ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
71
SURVEILLANCE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
6713. CLIENT SURVEILLANCE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
68
EXTERNAL STORAGE CONNECTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
ALARM CONNECTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
SENSOR CONNECTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
MOTION, SENSOR / ALARM SETTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
PRESET/EVENT TRACKING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
5511. QUICK USE 6 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
56
57
59
60
64
7215. QUICK USE 7 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
74JPG, BMP SAVE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
75BACKUP ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
66CLIENT INSTALLATION/CONNECTION ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
6512. CLIENT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

www.cascadiadvrt.com / [phone]
6
1. LAYOUT
FRONT VIEW
REAR VIEW

www.cascadiadvrt.com / [phone]
7
FRONT VIEW
1. Display Button
Shows the Display menu.
2. Search Button
Go to the Search menu.
3. Setup Button
Go to the Setup menu.
4. PTZ Button
Pan / tilt a selected camera.
5. Zoom Button
Zoom In/Out at 1CH Layout mode.
6. Backup Button
Go to the Backup menu.
7. REC Button
Record all cameras manually for emergency.
8. Rotate / Hold Button
Rotates the Live Camera Display.
Hold the search speed with Jog & Shuttle.
9. Lock Button
Locks the DVR.
10. Playback Button
Play, Pause, Reverse, Stop, End, Start.
11. Jog Dial
Play recorded images frame by frame when this
dial is rotated.
12. Shuttle Ring
Play fast when this dial is rotated.
13. Direction / Camera Layout Button
Move the cursor on the menu and shows camera
Layout.
UP: 1CH Layout,
Right: 4CH Layout
Down: 9CH Layout
Left: 16CH Layout
14. Enter Button
Determine the setting values.
15. ESC Button
Go back to the previous status.
16. Power LED
Light up when power is on.
17. HDD LED
Light up when built-in HDD is working.
18. REC LED
Light up when Manual recording is on.
1 2 3 4 5 6 7
9
8
10
11
12
13
14
15
16 17 18
19. Power Button
20. USB Port
Plug USB memory stick Upgrade
Software or Save Data. (USB 2.0)
21. Camera Button
Choose a camera you want to see.
22. CD/DVD Eject Button
19
20 21 22

www.cascadiadvrt.com / [phone]
8
REAR VIEW
Rear View
1. Camera Input Connectors
Connect cameras to these BNC connectors.
2. Camera Output Connectors (Loop Out)
These BNC connectors supply video signals looped
through the video input connectors.
3. Mic In
Connect a microphone to communication between DVR
and Client S/W.
4. Line Out
Connect a speaker for audio out.
5. S-Video
Connect a monitor to S-VHS connector.
6. VGA
Connect a VGA monitor with this connector.
7. USB (2.0)
Connect USB memory stick for Upgrade and for external
device like CD/DVD and other devices.
8. LAN (10/100BASE-T)
Connect this unit to a network compatible with
10BASET or 100BASE-Tx.
9. IEEE1394
Connect to an external device like CD/DVD RW.
10. CONFIG (UP-OFF, DOWN –ON)
1. NTSC(OFF)/PAL(ON)
2. ①– 485(OFF)/422(ON)
3. ②– 120ohm Termination (ON)
4. ③– 120ohm Termination (ON)
11. RS422/485
Connect a keyboard or PTZ.
12. ②RS-485
Connect a device using RS485 connector. Support
120 ohm termination.
Refer to No. 10, CONFIG setting.
13. ③RS-485 (Cascade In/Out)
Connect with the cascade Out connector of another
DVR for communication.
14. RS232C
Connect a device that support RS232C like PTZ or
POS.
15. Spot 1
Show quad out on an analogue monitor.
(Fixed, Rotation) (1X1, 2X2)
16. Spot 2
Show quad out on analogue monitor.
(Fixed, Rotation) (1X1, 2X2, 3X3, 4X4)
17. Cascade In/Out (BNC)
Connect with the CASCADE IN/OUT connector of
another DVR for image transmission.
18. Audio Input Connectors (AUDIO IN 1 - 4)
Input audio signal supplied from an external device
such as a microphone amplifier.
19. SENSOR (ALARM IN)
Connect an external device such as a sensor or a
door switch.
20. Alarm Out
Connect a control switch when controlling this unit
using an external device, or when controlling an
alarm device such as a buzzer or a lamp.

www.cascadiadvrt.com / [phone]
9
2. DISPLAY

www.cascadiadvrt.com / [phone]
10
DISPLAY / SYSTEM MENU
1. Press “DISPLAY”
The DISPLAY MENU will be displayed. Move the
curser to highlight the “SYSTEM” Icon and press
the “Enter” button to show the system
information.
2. DISPLAY / SYSTEM
5. DISPLAY / SYSTEM / H/W VER.
Move the curser to highlight the “H/W VER.”
Icon and press the “Enter” button to display the
H/W version.
4. DISPLAY / SYSTEM / S/W VER.
Move the curser to highlight the “S/W VER.”
Icon and press the “Enter” button to display the
S/W version.
3. DISPLAY / SYSTEM / REC.DATE
Move the curser to highlight the “REC. DATE”
Icon and press the “Enter” button to show the
oldest recorded date on each camera.

www.cascadiadvrt.com / [phone]
11
1. Press “DISPLAY”
The DISPLAY MENU will be displayed. Move the
curser to highlight the “DISPLAY” Icon and
press the “Enter” button to show the display
information.
2. DISPLAY / DISPLAY
Rotation: Camera split rotation.
Event Popup: Pop up on motion, sensor &
POS.
Status: Show the information bar on live mode.
4. DISPLAY / DISPLAY / POS
Live Mode Display: Shows the POS information
on live mode (On/Off).
Popup Display: Pops up the POS information
with a camera (On/Off).
Display Duration: Sets the pop up duration time
of the POS information (seconds).
3. DISPLAY / DISPLAY / LAYOUT
Layout: Default camera screen division layout
Width Margin: status bar margin width
Height Margin: status bar margin height
DISPLAY / DISPLAY MENU

www.cascadiadvrt.com / [phone]
12
DISPLAY / AUDIO, ALARM,
PTZ MENU
1. Press “DISPLAY”
The DISPLAY MENU will be displayed. Move the
curser to highlight the “AUDIO” Icon, “ALARM”
Icon or “PTZ” Icon and press the “Enter” button
to show the appropriate information.
2. DISPLAY / AUDIO
Channel: Select an audio CH No.
Beep: Beep On/Off on system warning.
5. DISPLAY / PTZ / ADDITION
Show an additional PTZ camera menu.
4. DISPLAY / PTZ
Control a PTZ camera.
3. DISPLAY / ALARM
Alarm On/Off.

www.cascadiadvrt.com / [phone]
13
2. DISPLAY / CONTROL
Remote CTRL ID: Remote controller ID.
Beep: Remote controller Beep On/Off.
Keypad Set: Keypad use On/Off
Keypad ID: Set a keypad ID.
DVR ID: Set a DVR ID.
DISPLAY / CONTROL MENU
1. Press “DISPLAY”
The DISPLAY MENU will be displayed. Move the
curser to highlight the “CONTROL” Icon and
press the “Enter” button to show the control
information.
3. DISPLAY / CONTROL / CASCADE
Cascade Type: Set a DVR to Master or Slave.
Slave Select: Select a slave DVR No. to show
on monitor.
Cascade Output: Select an output to show on
cascade output.

www.cascadiadvrt.com / [phone]
14
DISPLAY / V-OUTPUT,
LOG VIEW MENU
1. Press “DISPLAY”
The DISPLAY MENU will be displayed. Move the
curser to highlight the “V-OUTPUT” Icon or
“LOG VIEW” Icon and press the “Enter” button
to show the appropriate information.
2. DISPLAY / V-OUTPUT
Mode: Select a fixed and rotation mode for
spot.
Camera: Select a camera layout.
3. DISPLAY / LOG VIEW
Show the log information of DVR.
NOTE:
Spot1 = Support 1X1,2X2 layout.
Spot2 = Support 1X1, 2X2, 3X3, 4X4 layout.

www.cascadiadvrt.com / [phone]
15
CAMERA
RECORD
SCHEDULE
MOTION
SENSOR
ALARM
NETWORK
STORAGE
USER
POS
SYSTEM
EVENT
3. SETUP

www.cascadiadvrt.com / [phone]
16
SETUP / CAMERA MENU
1. Press” SETUP”
The SETUP MENU will be displayed. Move the
curser to highlight the “CAMERA” Icon and
press the “Enter” button to show the camera
information.
2. SETUP / CAMERA
On/Off: Camera On/Off.
Audio: Audio = On/Off, Size = Resolution.
4. SETUP / CAMERA / PTZ
Set a camera protocol, ID and Port.
3. SETUP / CAMERA / COLOR
Set a color of camera.
NOTE:
Item selection: Move the cursor using the
arrow buttons.
Change the setting: Press “Enter” button.
NOTE:
Default P/W is “0”.
5. SETUP / CAMERA / EVENT
Set a remote transmission, e-mail and beep on
no video signal.

www.cascadiadvrt.com / [phone]
17
3. SETUP / RECORD / EVENT FPS
Motion FPS = Recording speed of Motion.
Sensor FPS = Recording speed of Sensor.
Text FPS = Recording speed of POS.
SETUP / RECORD MENU
2. SETUP / RECORD
Fps = Recording speed
Quality = Image Quality
Mode = Compression
(MP4+ = Network Priority, MP4 = Image size
Priority)
Post & Pre = Post & Pre recording
NOTE:
Item selection: Move the cursor using the
arrow buttons.
Change the setting: Press “Enter” button.
NOTE:
Default P/W is “0”.
1. Press “SETUP”
The SETUP MENU will be displayed. Move the
curser to highlight the “RECORD” Icon and
press the “Enter” button to show the record
information.
4. SETUP / RECORD / OPTION
Watermark = Watermarking recording data per
camera.
Deinterlace = Anti aliasing filter.

www.cascadiadvrt.com / [phone]
18
SETUP - SCHEDULE MENU
2. SETUP / SCHEDULE
Set a schedule for each camera.
3. SETUP / SCHEDULE / SPECIALITY /
NOISE
Recording speed will be changed when noise
schedule is set.
It’s effective to save HDD capacity for night
time.
4. SETUP / SCHEDULE / SPECIALITY /
ALARM
Set an alarm schedule for each alarm.
Alarm goes off when alarm schedule is set.
5. SETUP / SCHEDULE / HOLIDAY
Set a schedule for holiday.
1. Press “SETUP”
The SETUP MENU will be displayed. Move the
curser to highlight the “SCHEDULE” Icon and
press the “Enter” button to show the schedule
information.

www.cascadiadvrt.com / [phone]
19
SETUP / MOTION, SENSOR
MENU
2. SETUP / MOTION
Set a motion area and sensitivity.
4. SETUP / SENSOR
Type: Sensor type (N/C, N/O).
Camera: Select a linked camera for each
sensor.
3. SETUP / MOTION / EVENT
Set a remote transmission, e-mail, beep and
alarm on motion.
5. SETUP / SENSOR / EVENT
Set a remote transmission, e-mail, beep and
alarm on sensor.
NOTE:
Item selection: Move the cursor using the arrow
buttons.
Change the setting: Press “Enter”button.
NOTE:
Default P/W is “0”.
1. Press “SETUP”
The SETUP MENU will be displayed. Move the
curser to highlight the “MOTION” or
“SCHEDULE” Icon and press the “Enter” button
to show the appropriate information.

www.cascadiadvrt.com / [phone]
20
SETUP / ALARM MENU
2. SETUP / ALARM
Type: Alarm type (N/C, N/O).
Duration: Set an alarm duration.
NOTE:
Item selection: Move the cursor using the arrow
buttons.
Change the setting: Press “Enter” button.
NOTE:
Default P/W is “0”.
1. Press “SETUP”
The SETUP MENU will be displayed. Move the
curser to highlight the “ALARM” Icon and press
the “Enter” button to show the alarm
information.