Case IH FARMALL 65C User manual

Part number 84576294
1st edition English
May 2012
OPERATOR’S MANUAL
Farmall®65C
Farmall®75C
Farmall®85C
Farmall®95C
Tractor
From PIN ZCJB12002
epcatalogs.com

0-2
TO THE OWNER
This manual contains information concerning the adjustment and maintenance of your Case IH Farmall Model
65C, 75C, 85C and 95C Tractors. You have purchased a dependable machine, but only by proper care and
operation can you expect to receive the performance and long service built into this tractor. Please have all
operators read this manual carefully and keep it available for ready reference.
Your Case IH dealer will instruct you in the general operation of your tractor. (Refer to the “Delivery Report” at
the back of this manual.) Your dealer’s staff of factory-trained service technicians will be glad to answer any
questions that may arise regarding the operation of your tractor.
Your Case IH dealer carries a complete line of genuine Case IH service parts. These parts are manufactured
and carefully inspected to insure high quality and accurate fitting of any necessary replacement parts. Be
prepared to give your dealer the model and product identification number of the tractor, when ordering parts.
Locate these numbers now and record them below. Refer to the “General Information” section of this manual for
the location of the model and product identification numbers of your tractor.
Model
Product Identification Number
WARNING
This safety alert symbol indicates important safety messages in this manual. When you see this symbol,
carefully read the message that follows and be alert to the possibility of personal injury or death.
WARNING
Pictures in this manual may show protective shielding open or removed to better illustrate a particular
feature or adjustment.
Be certain, however, to close or replace all shielding before operating the machine.
IMPROVEMENTS
CNH America LLC is continually striving to improve its products. We reserve the right to make improvements or
changes when it becomes practical and possible to do so, without incurring any obligation to make changes or
additions to the equipment sold previously.
epcatalogs.com

0-3
CONTENTS
Section 0
TotheOwner 0-1...............................................................................
Improvements 0-1..............................................................................
FederalEmissionsWarranty 0-5..................................................................
CaliforniaEmissionControlWarrantyStatement 0-6.................................................
Section 1
GeneralInformationandSafety 1-1...............................................................
TractorIdentificationPlates 1-2...................................................................
ImportantEcologicalConsiderations 1-5...........................................................
PrecautionaryStatements 1-6....................................................................
WorkingSafely 1-8..............................................................................
SafetyCoversandGuards 1-14...................................................................
Fold-downRollBar(ROPS) 1-16..................................................................
SafetyDecals 1-17..............................................................................
StandardizedSymbols 1-24......................................................................
TractorNoiseLevelInformationSheet 1-25.........................................................
Section 2
GeneralInformation,ControlsandInstruments 2-1..................................................
Introduction 2-1.................................................................................
AnalogControlPanel 2-2........................................................................
AnalogPanelIndicators 2-3......................................................................
OperationIndicatorLightPanel 2-9................................................................
OperatingControls 2-31.........................................................................
SeatAdjustment 2-36...........................................................................
SteeringWheelAdjustment 2-38..................................................................
Cab 2-39......................................................................................
AirConditioning/Ventilation 2-44..................................................................
CabAir-conditioning/HeatingControls 2-45.........................................................
Transmission with Range Gear and Mechanical
Shuttle 30/40 km/h (18.64/24.35 mph) (16F+16R) 2-52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transmission with Range Gear and Electro-hydraulic
Shuttle 30/40 km/h (18.64/24.85 mph) (16F+16R) 2-53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FastTransmissions40km/h(24.85mph) 2-58......................................................
epcatalogs.com

0-4
Section 3
FieldOperation 3-1.............................................................................
StartingandStopping 3-2........................................................................
Brakes 3-5.....................................................................................
Mechanical MFD (Farmall 65C, 75C and 85C Models only) 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ElectronicallyControlledMFD 3-8.................................................................
DifferentialLock 3-9.............................................................................
Lim-slipFrontDifferentialLock 3-10...............................................................
Electrohydraulically Controlled Differential Lock 3-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PowerTake-off 3-13.............................................................................
MechanicallyControlledHydraulicLift 3-16.........................................................
Three-pointLinkage 3-20........................................................................
Three-pointLinkagePoints 3-24..................................................................
AuxiliaryControlValves(UseandMaintenance) 3-25................................................
RearRemoteControlValves 3-28.................................................................
WheelTrackAdjustment 3-31....................................................................
MFDFrontandRearWheelTrackAdjustment 3-33..................................................
SteeringAngleAdjustment(MFD) 3-34............................................................
Tires 3-39......................................................................................
LoadingInformation 3-41........................................................................
SpeedCode 3-41...............................................................................
InflationPressures 3-42..........................................................................
TireSizes. 3-43.................................................................................
R1RadialTires 3-43............................................................................
BiasR1Tires 3-45..............................................................................
TurfBiasR3Tires 3-46..........................................................................
IndustrialR4Tires 3-47..........................................................................
TireSelection(MFD) 3-48........................................................................
MetalBallasting 3-50............................................................................
LiquidBallasting 3-51............................................................................
MaximumPermittedWeights 3-53.................................................................
Section 4
LubricationandMaintenance 4-1.................................................................
TractorRefuelling 4-3...........................................................................
AccessforInspectionandMaintenance 4-6........................................................
LubricationandMaintenanceTable 4-7............................................................
Flexible Maintenance (Operations to Perform Only If Necessary) 4-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
epcatalogs.com

0-5
When the Indicator Light Illuminates on the Dashboard 4-15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Every10HoursofWork 4-19.....................................................................
Every50HoursofWork 4-20.....................................................................
Every100HoursofWork 4-22....................................................................
Every300HoursofWork 4-25....................................................................
Every500/600HoursofWork 4-30................................................................
Every1200HoursorEveryYear 4-34..............................................................
Every1200HoursofWorkorEvery2Years 4-36....................................................
Every1800HoursofWork 4-41...................................................................
GeneralMaintenance 4-42.......................................................................
ElectricalSystem 4-42...........................................................................
Starting the Engine with a Flat Battery or No Battery 4-43. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FusesandRelays(VersionWithCab) 4-45.........................................................
FusesandRelays(WithROPS) 4-56..............................................................
ReplacingMultipleInstrumentPanelIndicators 4-66.................................................
RecommendationsforBodyworkMaintenance 4-71.................................................
LubricantsandFluids 4-72.......................................................................
Section 5
Troubleshooting 5-1.............................................................................
Section 6
ProlongedTractorInactivity 6-1...................................................................
Section 7
Accessories 7-1................................................................................
TowingEquipment 7-2...........................................................................
JoystickControl(OnRequest) 7-3................................................................
Section 8
SpecificationsandData 8-1......................................................................
EngineData 8-4................................................................................
Section 9
Inspectionsand/orOperationstobeCarriedOut 9-1.................................................
Index 9-5......................................................................................
epcatalogs.com

Buy now
Case Farmall 65C,75C,85C and 95C PDF tractors Operator's manuals
With Instant Download