Casio PV-100 User manual

101
The pop up tools of the PV Unit provide you with instant access to a calculator,
a calendar, and a clock whenever you need them.
Chapter
8Pop Up Tools
8
Displaying the Pop Up Tool Screen ............................................. 102
Using the Clock Screen................................................................. 102
To display the clock screen....................................................................... 103
To make one of the clocks the main clock................................................ 103
To select a time zone city ......................................................................... 104
To switch between standard time and daylight saving time (DST) .......... 104
Using the Calculator Screen......................................................... 105
To display the calculator ........................................................................... 105
Calculator Keys ........................................................................................ 106
To perform calculations ............................................................................ 107
To perform constant calculations.............................................................. 108
To correct entries during calculations....................................................... 108
About calculation errors ........................................................................... 109
To clear an error........................................................................................ 109
NextAppointment Screen............................................................. 110
To display the next appointment screen.................................................... 110

102
Displaying the Pop Up Tool Screen
While a screen that has a mode icon in its upper left-hand corner is on the display,
tap the mode icon to display the pop up tool screen.
2
1
345
6
7
8
Important!
• You can use only one pop up tool at a time. This means the calculator screen
will not appear while the clock screen is on the display, etc.
Using the Clock Screen
The clock screen shows two clocks and the cities whose times are displayed on
the clocks. It also shows whether daylight saving time (summer time) is set for
either clock, and the date in the city of the main (currently selected) clock.
1Clock
(Tap to display date/time
setting screen on page 156.)
2Home city
3Clock icon
4Calendar icon
5Calculator icon
6Alarm indicator
(Tap to display alarm
setting screen on page 158.)
7Current date
8Current time

103
Chapter 8 Pop Up Tools
To display the clock screen
On the pop up tool screen, tap the icon.
1
3
2
4
5
6
7
8
9
• Holding the stylus on Clock 1 or Clock 2 causes the date and time for
the clock to appear in the first two lines of the clock screen.
• You can close the clock screen by tapping .
To make one of the clocks the main clock
1. While the clock screen is on the display, tap the button ( ) to the left of
the city name whose clock you want to make the main clock.
2. In response to the confirmation message that appears, tap Set to change
the main clock or Esc to close the dialog box without doing anything.
Important!
• The time being kept by the main clock affects all alarms and other date-
sensitive data currently in PV Unit memory. If you set an alarm to sound
at 11:00 a.m. while Tokyo time is being used for the main clock, changing
to New York time, for example, will cause the alarm to sound at 11:00
a.m. New York time.
• Changing the main clock automatically resets the seconds count of the
clock to 00.
1Date in city of main clock
2Time in city of main clock
3Clock 1 city name
4Main clock
5Clock 2 city name
6Clock 1
7Alarm indicator
(Tap to display alarm setting
screen on page 158.)
8Daylight saving time indicator
9Clock 2

104
To select a time zone city
1. On the clock screen, tap the city name you want to change.
2. In the index at the bottom of the display, use the stylus to tap the letter
that begins the name of the city you want to select.
3. Highlight the name of the city you want to select by tapping it or using
the Action control.
4. When the city you want is highlighted on the screen, tap Set to register
it and close the setting screen.
To switch between standard time and daylight saving time (DST)
On the clock screen, tap on the DST (summer time) setting of one of the
clocks to toggle it between DST on ( ) and DST off (no indicator).
DST (summer time) setting

105
Chapter 8 Pop Up Tools
Using the Calculator Screen
This screen provides you with a 12-digit calculator that can perform a variety of
calculations.
To display the calculator
On the pop up tool screen, tap the icon.
• You can also display the calculator in certain modes by tapping the
button in the data input tool bar.
• You can close the calculator screen from the display by tapping .

106
Calculator Keys
The following describes the functions of the calculator screen keys.
• Use the number keys to input values.
•MC clears calculator memory.
•MR recalls calculator memory contents.
•M– subtracts the currently displayed value from memory contents.
Tapping M– in place of =at the end of a calculation subtracts its results
from memory contents.
•M+ adds the currently displayed value to memory contents. Tapping
M+ in place of =at the end of a calculation adds its results to memory
contents.
• Tap +, –, #, and $to input the corresponding arithmetic operation.
•=executes the calculation and displays its results.
•AC clears the calculator (except the calculator memory).
•Cclears the display without clearing calculator memory.
• Use q for square root calculations.
• Use %for percent calculations.
• Tapping ➡shifts the displayed value to the right, cutting off the rightmost
digit.
• If you displayed the calculator by tapping the button in a data input
tool bar, tapping copies the calculation result. Edit – Paste pastes
the copied result at the current cursor location.

107
Chapter 8 Pop Up Tools
a0.
53 + 123 – 63 = 53q123w63u113.
963 ·(23 – 56) = 23w56e963u– 31’779.
(56 ·3 – 89)
‚ 5.2 + 63 = 56e3w89r5.2
q63u78.1923076923
1234567890 ·741852 = 1234567890e741852uE 915.866658332
C915.866658332
a0.
3
·5= 3ye5u8.6602540378
12 + 23 = 23qq12uK + 35.
45 + 23 = 45uK + 68.
78 + 23 = 78uK + 101.
7 – 5.6 = 5.6ww7uK – 1.4
2 – 5.6 = 2uK – – 3.6
2.3 ·12 = 12ee2.3uK·27.6
4.5 ·12 = 4.5uK·54.
45 ‚ 9.6 = 9.6rr45uK ‚ 4.6875
78 ‚ 9.6 = 78uK ‚ 8.125
12% of 1500 1500e12t180.
Percentage of 660 against 880 660r880t75.
15% add-on of 2500 2500e15tq 2’875.
25% discount of 3500 3500e25tw 2’625.
480q25t640.
w160.
100w80t25.
80 ·9 = 720 {80e9|M 720.
–) 50 ·6 = 300 50e6}M 300.
20 ·3 = 60 20e3|M 60.
480 \M 480.
What will the selling price and profit
be when the purchasing price of an
item is $480 and the profit
rate to the selling price is 25%?
If you made $80 last week and $100
this week, what is the percent
increase?
To perform calculations

108
To perform constant calculations
1. On the calculator screen, input the first value of the operation, tap an
arithmetic operator key twice, and then input the second value of the
operation.
• You can perform a constant calculation using +, –, #, or $.
• The first value you input (the one to the left of the arithmetic operator)
is the one that will be used as the constant.
• Tapping an arithmetic operator key twice causes the indicator Kto appear
on the display to indicate that a constant calculation is being performed.
2. Tap =to display the result of the operation.
• Inputting 4##2 = would produce a result of 8.
3. Tap =again to multiply the result by the constant.
• Tapping =again with the example shown under step 2 would produce a
result of 32 (8 ·4).
• Each subsequent tap of =multiplies the last result obtained by the
constant. Continuing with the above example, tapping =would produce
the following results: =128 (32 ·4), =512 (128 ·4), =2048 (512 ·4),
and so on.
To correct entries during calculations
• If you enter a wrong value, tap Cto clear the value and then input the
correct one.
• If you tap the wrong arithmetic key (+, –, #, $), simply tap the correct
arithmetic key before inputting anything else.

109
Chapter 8 Pop Up Tools
About calculation errors
An error indicator appears on the display and further calculation becomes
impossible whenever an error occurs.
Any of the following conditions produces an error.
• Whenever the number of digits in the mantissa of an intermediate or
final result exceeds 12
• Whenever the number of digits in the mantissa of a value in calculator
memory exceeds 12 digits. In this case, the PV Unit automatically retains
the last value stored that did not exceed 12 digits.
• Division by zero
• Attempting to calculate the square root of a negative value
To clear an error
Tap Cto clear an error and continue with the same calculation from the
point immediately before the error occurred.
To clear the entire calculation and start again, tap AC.
Error indicator

110
Next Appointment Screen
This screen shows a display of the current month, along with details about the
next appointment scheduled from the current time and date, as kept by the main
clock (if any).
To display the next appointment screen
On the pop up tool screen, tap the icon.
1
2
3
4
• The current month is determined in accordance with the time and date
as kept by the main clock.
• The next appointment details area shows the next Schedule item or
Reminder item that includes time data. It does not show any Schedule
or Reminder items that do not include time data.
• The next appointment details area is blank when there is no future
appointment scheduled.
• You can close the next appointment screen by tapping .
1Current month
2Date for which appointment
is scheduled
3Next appointment details
4Next appointment