Casio DT-X100 Series User manual

SERVICE MANUAL
Ver.2 : Jun. 2018
HANDHELD TERMINAL
DT-X100
JUN. 2015

CONTENTS
1. PRECAUTIONS .......................................................................................................... 1
2. GENERAL................................................................................................................... 7
3. RESET ......................................................................................................................16
4. DISASSEMBLY ........................................................................................................ 18
5. DIAGNOSTIC PROGRAM........................................................................................ 39
6. ADJUSTMENT/SETTING ......................................................................................... 63
7. EXPLODED VIEW/PARTS LIST .............................................................................. 67

• Bluetooth is a trademark owned by Bluetooth SIG,Inc.and licensed to CASIO COMPUTER CO., LTD.
• Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• Other company names and product names used in this document are trademarks or registered
trademarks of their respective owners.
Important:
They assume no responsibility or liability for any errors or inaccuracies may appear
in this publication nor are they anyway responsible for any loss or damage resulting
from the use (or misuse) of this publication.
The company reserves the right to revise this publication or to charge its content
without notice.

— 1 —
1. PRECAUTIONS
1-1. Safety Precautions
Precautions During Use
Warning
Interference with the Operation of Other Equipment
(Using Wireless Data Communication)
•Keep your Handheld Terminal at least 22 centimeters (811/16") away from anyone wearing
a pacemaker. Radio waves emitted by the Handheld Terminal can affect the operation of a
pacemaker.
•In order to protect someone wearing a pacemaker from the risk of unintentional interference,
turn off the Handheld Terminal before boarding a crowded train or entering any other crowded
area.
Caution
Foreign Objects
• Take care to ensure that metals or combustible objects are not inserted into the openings of
the Handheld Terminal and its options. Such the objects inside of the Handheld Terminal create
the danger of fire and electric shock.
Location
• Do not locate the Handheld Terminal and its options on a surface that is unstable or uneven.
Doing so creates the danger of the Handheld Terminal falling, which can cause personal injury.
• Do not locate the Handheld Terminal and its options in an area subject to large amounts of
humidity or dust. Doing so creates the danger of fire and electric shock.
• Do not leave the Handheld Terminal and its options for a long period in a car parked in direct
sunlight.
Heavy Objects
• Never place heavy objects on top of the Handheld Terminal and its options.
Doing so creates the danger of loss of balance and the objects falling, which can cause
personal injury.
LCD Screen
• Never apply strong pressure to the screen or subject it to strong impact.
Doing so can crack the screen or LCD panel glass, which can cause the danger of personal
injury.
• Should the LCD panel glass break, never touch the liquid inside. Doing so can cause skin infl
ammation.
– Should liquid from the LCD panel accidentally get into your mouth, immediately wash your
mouth with water and then consult a physician.
– Should liquid from the LCD panel accidentally get into your eyes or onto your skin, immediately
rinse for at least 15 minutes with clean tap water and then consult a physician.

— 2 —
Lithium-ion Battery Pack
Danger
•Never allow the battery pack to become wet. Water can create the danger of battery pack heat
emission, explosion, and fire.
•Never use or leave the battery pack next to open flame, near a stove, or any other area exposed
to high heat. Doing so creates the danger of battery pack heat emission, explosion, and fire.
•Never use the battery pack with any device other than the Handheld Terminal. Doing so can
create the danger of battery pack heat emission, explosion, and fire.
•Note that the battery pack’s positive (+) and negative (–) polarities must be oriented correctly
when it is loaded into battery charger or the Handheld Terminal. Connecting the battery pack
with its polarities reversed creates the danger of battery pack fluid leakage, heat emission,
explosion, and fire.
•Never dispose of the battery pack by incinerating it or otherwise expose it to heat. Doing so
creates the danger of battery pack heat emission, explosion, and fire.
•
Never allow the positive (+) and negative (–) terminals of the battery pack to become connected
(shorted) by metal. Doing so creates the danger of battery pack heat emission, explosion, and fire.
•Never transport or store the battery pack together with a necklace, hair pins or other metal
objects. Doing so can short battery pack terminals, creating the danger of battery pack
heat emission, explosion, and fire. Be sure to place the battery pack in its case whenever
transporting or storing it.
•Never throw the battery pack or otherwise subject it to strong impact. Doing so creates the
danger of battery pack heat emission, explosion, and fire.
•Never pierce the battery pack with nails, hit it with a hammer, or step on it. Doing so can create
the danger of battery pack heat emission, explosion, and fire.
•Never try to take apart the battery pack or modify it in any way. Doing so creates the danger of
battery pack heat emission, explosion, and fire.
•Use only the specified battery charger to charge the battery pack. Use of other type of battery
charger creates the danger of battery pack heat emission, explosion, and fire.

— 3 —
Warning
•Never place the battery pack in a microwave oven or any other high-voltage device. Doing so
creates the danger of battery pack heat emission, explosion, and fire.
•Should the battery pack emit a strange odor or heat, change color or shape, or exhibit any
other abnormal behavior, immediately stop using it. Continued use creates the danger of
battery pack heat emission, explosion, and fire.
•If the amount of time period the battery pack can serve becomes considerably short, stop
using it. It may indicate the possibility of a malfunction in the battery pack. Continued charging
the battery pack creates the danger of heat emission, explosion, and fire.
•If the battery pack does not achieve full charge after the normal charging time has passed, stop
charging it. Continued charging creates the danger of battery pack heat emission, explosion,
and fire.
•Should the battery pack start to leak or emit a strange odor, immediately move it away from any
nearby flame. Leaking battery fluid is combustible, and exposure to flame creates the danger
of explosion and fire.
•Should fluid from the battery pack accidentally get into your eyes, do not rub them.
Immediately rinse your eyes with clean tap water and then consult a physician immediately
Caution
•Never use or leave the battery pack in an area exposed to direct sunlight, in a car parked in
direct sunlight, or any other very hot area. Doing so creates the danger of heat emission and
fire, as well as deterioration of battery pack performance and shortening of its service life.
•Do not use the battery pack in areas where static electricity is being generated. Doing so
creates the danger of battery pack heat emission, explosion, and fire.
•Danger of explosion if the battery pack is incorrectly replaced.
•Replace only with same or equivalent type recommended by CASIO. Dispose of used batteries
according to the local regulation.
•Should fluid from the battery pack accidentally get onto clothing or your skin, immediately
rinse it off with clean tap water. Prolonged contact with battery pack fluid can cause skin
irritation.
•Keep the battery pack out of the reach of small children. Do not let small children remove the
battery pack from battery charger or the Handheld Terminal while it is powered on.

— 4 —
AC Power Supply
Warning
•Do not use the Handheld Terminal at a voltage other than the specified voltage. Also, do not
connect the Handheld Terminal to a multi-plug power strip. Doing so creates the danger of fire
and electric shock.
•Avoid conditions that can cause damage or breaks in the power cord. Do not place heavy
objects on the power cord and keep it away from sources of heat. Any of these conditions can
damage the power cord, creating the danger of fire and electric shock.
•Never modify, sharply bend, twist, or pull on the power cord. Doing so creates the danger of
fire and electric shock.
•Power cable (especially on the plug)
Never use a detergent to clean AC adaptor, especially on the plug and the jack.
•When using the battery chargers and the cradles, be sure to use the respective AC adaptors (sold
separately). Use of other AC adaptor model creates the danger of fire and electric shock.
•
Should the power cord become severely damaged (to the point that wires are exposed or broken),
replace it with a new cord. Use of a damaged electrical cord creates the danger of fire and
electric shock.
Caution
•Keep the power cord away from stoves and other sources of extreme heat.
Heat can melt the covering of the power cord and create the danger of fire and electric shock.
•
Never pull on the power cord when unplugging it. Doing so can damage the cord and create the
danger of fire and electric shock. (Always hold the plug when unplugging it from the wall outlet. )
•
Never touch the plug while your hands are wet. Doing so can create the danger of electric shock.
•Be sure to unplug the power cord from the wall outlet before moving the battery chargers and
the cradles. Failure to do so can result in damage to the power cord caused by pulling it, which
creates the danger of fire and electric shock.
•Be sure to unplug the power cord from the wall outlet before cleaning the battery chargers and
the cradles.
•Be sure to unplug the power cord after use.
•Unplug the power cord from the wall outlet whenever leaving the battery chargers and the
cradles unattended for a long period.

— 5 —
1-2. Operating Precautions
Your Handheld Terminal and its options are precision. Improper operation or rough handling can cause
problems with data storage and other problems. Note and observe the following precautions to ensure
proper operation.
•Do not continue operating the Handheld Terminal when battery power is low.
Doing so can cause data to be lost. When the battery goes low, charge it as soon as possible.
•Do not leave dead battery pack in the Handheld Terminal for a long period.
Dead battery pack can leak, leading to malfunction and damage to the Handheld Terminal.
• Use the Handheld Terminal and its options only within the specified temperature range.
Use outside of the specified temperature range creates the risk of malfunction.
• Avoid using the Handheld Terminal and its options in areas subject to the following conditions.
The following conditions create the risk of damage to the Handheld Terminal.
— Large amounts of static electricity
— Extreme heat or extreme cold
— High humidity
— Sudden temperature extremes
— Large amounts of dust
• Never use thinner, benzene, cosmetic cleaning fluids, or other volatile agents to clean the
Handheld Terminal.
To clean the Handheld Terminal, wipe it with a dry cloth, or a cloth moistened in a weak solution
of water and a mild neutral detergent. Wring all excess moisture from the cloth before wiping.
• Although the Handheld Terminal meets the IP54 level of the International Standard IEC529, pay
your attention to the following when using it in the rain.
— After a large amount of rain or water falls on the Handheld Terminal, wipe off it immediately.
— Do not use it in the rain for a long period of time.
— Make sure the battery cover and connect cover are closed securely before using it.
— Do not press on the screen or keys with excessive force when using it in the rain.

— 6 —
1-3. Precautions when handling and using the product
Charging, Feeding, Batteries
Use HA-F20BAT or HA-F21LBAT as the rechargeable battery pack.
A secondary battery is used as a backup.
Do not replace the main battery when the backup battery is not yet fully charged. Removing the main
battery while the backup battery is used-up may cause deletion of data.
The rechargeable battery pack may suffer from low voltage due to shipping inspection and natural
discharge. Make sure to charge the rechargeable battery pack before using the product.
Life of the rechargeable battery pack will be shortened as it is repeatedly charged and discharged.
Replace the rechargeable battery pack when continuous operating time becomes extremely shorter even
if it is fully charged.
Charge the main battery within the temperature from 0 to 40 °C.
Failure to do so does not charge the battery as the charging protection function starts working.
Memory (RAM) can be backed for about 10 minutes without the main battery when the backup battery is
fully charged.
Make sure to load the rechargeable battery pack when charging.
Other
This product uses sensitive wireless communication. In order to perform good communication, do not use
devices that emit radio waves (such as a cell phone) near the product during the communication. If such
devices must be used, keep them away from the product (ex. keep a cell phone away from the product
more than 30 cm.)
1-4. Storage
Remove the battery when storing the product for a long period of time.
Avoid storing the product in the environment with higher temperature (more than 60 °C) such as inside a car.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
CAUTION

— 7 —
2. GENERAL
2-1. LINE UP
MODELS Feature
Scanner Bluetooth W-LAN
DT-X100-10E Laser Class2 IEEE 802.11a/b/g/n
DT-X100-20E 2D Imager Class2 IEEE 802.11a/b/g/n
2-2. OPTIONS
CRADLE and CRADLE TYPE BATTERY CHARGER
HA-F60IO (PY-551AA) / HA-F60IO-CN (PY-551AAC)
USB Cradle
Interface : USB (ver.1.1)
Charge Time : Approx. 3 hours (HA-F20BAT)
Approx. 5.5 hours (HA-F21LBAT)
AC Adapter : AD-S42120B
HA-F62IO (PY-554AA) / HA-F62IO-CN (PY-554AAC)
LAN Cradle
Interface : LAN (10base-T/100base-T)
USB (ver.1.1)
Charge Time : Approx. 3 hours (HA-F20BAT)
Approx. 5.5 hours (HA-F21BAT)
AC Adapter : AD-S42120B
HA-F30CHG (PY-556AA) / HA-F30CHG-CN (PY-556AAC)
Cradle Type Battery Charger
Charge Time : Approx. 3 hours (HA-F20BAT)
Approx. 5.5 hours (HA-F21LBAT)
AC Adapter : AD-S15050B
HA-F36DCHG (PY-556AA)
Cradle Type Multiple Battery Charger
Charge Time : Approx. 3 hours (HA-F20BAT)
Approx. 5.5 hours (HA-F21LBAT)
AC Adapter : AD-S60160B
Up to three HA-F36DCHG can be connected.
BATTERY CHARGER
HA-F32DCHG (PY-555AA) / HA-F32DCHG-CN (PY-555AAC)
Dual Battery Charger
Charge Time : When charging one battery:
Approx. 3 hours (HA-F20BAT)
Approx. 5.5 hours (HA-F21LBAT)
When charging two batteries:
Approx. 5.5 hours (HA-F20BAT)
Approx. 10 hours (HA-F21LBAT)
AC Adapter : AD-S42120B
Up to three HA-F32DCHG can be connected.

— 8 —
AC ADAPTER
AD-S42120BE (PX-872GE) / AD-S42120BE-CN (PX-872GEC)
For USB Cradle / LAN Cradle / Dual Battery Charger
Input : AC 100-240 V, 50/60 Hz, 1.2 A
Output : DC 12 V, 3.5 A
AD-S15050BE (PX-872EE) / AD-S15050BE-CN (PX-872EEC)
For Cradle Type Battery Charger
Input : AC 100-240 V, 50/60 Hz, 0.4 A
Output : DC 5 V, 3.0 A
AD-S60160B (PX-872HA)
For Cradle Type Multiple Battery Charger
Input : AC 100-240 V, 50/60 Hz, 1.5 A
Output : DC 16 V, 3.7 A
RECHARGEABLE BATTERY PACK
HA-F20BAT (PY-553MA) / HA-F20BAT-CN (PY-553MAC)
Battery Pack
Rated Capacitance : 1100 mAh
Rated Voltage : 3.7 V
HA-F21LBAT (PY-553LA) / HA-F21LBAT-CN (PY-553LAC)
Large Capacity Battery Pack
Rated Capacitance : 1880 mAh
Rated Voltage : 3.7 V
DRY CELLS BATTERY CASE (For DT-X7 M10 series only)
HA-F22BC (PX-552AA) / HA-F22BCC (PX-552AAC)
Dry Cells Battery Case
Requires four AAA alkaline batteries
CABLE
DT-380USB (PX-820AB)
USB Cradle - PC
2-3. CONSUMABLE ITEMS
Name Model Remark
Battery Pack HA-F20BAT
HA-F20BAT-CN Sales Option
Large Capacity Battery Pack HA-F21LBAT
HA-F21LBAT-CN Sales Option

— 9 —
2-4. SPECIFICATIONS
Item Specifi cations
CPU Marvell® PXA320 806MHz
OS Microsoft® Windows® Embedded Compact7
Memory RAM 256MB
FlashROM 512MB (User area: 300MB)
1D Laser model Frontage Straight 24 degree
Wavelength 645 ~ 664nm
Optical Output 1mW or less
No. of scans 100 ± 20scan/sec
Resolution 0.127mm
Read PCS 0.45 or higher
Readable Distance Approx 40 ~ 550mm
Scan Width Max. 424mm (Depth 550mm)
Ambient light Sunlight 50,000 lux or less
Readable
Symbologies
UPC-A/UPC-E/EAN8(JAN8)/EAN13(JAN13)/Codabar(NW-7)/
Code39Interleaved2of5(ITF)/MSI/Industrial2of5/Code93/
Code128(EAN128)/IATA/GS1 DataBar Omnidirectional(RSS-14)/
GS1 DataBar Limited(RSSLimited)/
GS1 DataBar Expanded(RSS Expanded)/
GS1 DataBar Stacked(RSS-14Stacked)/
GS1 DataBar Expanded Stacked(RSS Expanded Stacked)/
GS1 DataBar Truncated/
GS1 DataBar Stacked Omnidirectional(RSS-14 Stacked Omnidirectional)
2D Scanner
model
Principle CMOS imager, 832 × 640, Monochrome
Aimer Laser: 650nm, 1mW or less
Frontage Straight 37 degree
Resolution 1D: 0.127mm
2D Stacked: 0.168mm
2D Matrix: 0.191mm
Read PCS 0.45 or higher
Readable Distance 1D Resolution 0.25mm: 45 ~ 250mm
1D Resolution 0.5mm: 69 ~ 400mm
2D stack ed Resolution 0.25mm: 40 ~ 230mm
2D matrix Resolution 0.25mm: 64 ~ 150mm
2D matrix Resolution 0.5mm: 48 ~ 300mm
* Varies depending on the environment and transmission rate.
Scan Width Max. 39mm (Depth 45mm)
Max. 277mm (Depth 400mm)
* Varies depending on the environment and transmission rate.
Focusing 5 inch
Ambient light Sunlight 50,000 lux or less

— 10 —
Item Specifications
2D Scanner
model
Readable
Symbologies
(1D)
UPC-A/UPC-E/EAN8(JAN8)/EAN13(JAN13)/Codabar(NW-7)/
Code39Interleaved2of5(ITF)/MSI/Code93/
Code128(GS1-128(EAN128))/Code11/
GS1 DataBar Omnidirectional(RSS-14)/
GS1 DataBar Limited(RSSLimited)/
GS1 DataBar Expanded(RSS Expanded)/
Code32/GS1 DataBar Truncated(RSS-14 Truncated)/ISBT
Readable
Symbologies
(2D Stacked)
PDF417/Micro PDF/Composite/Codablock F/
GS1 DataBar Stacked Omnidirectional (RSS-14 Stacked Omnidirectional)/
GS1 DataBar Expanded Stacked (RSS Expanted Stacked)/
GS1 DataBar Stacked (RSS-14 Stacked)/
GS1DataBar Truncated (RSS-14 Truncated)
Readable
Symbologies
(2D Matrix)
Aztec,DataMatrix,Maxicode,QR Code,Micro QR
Vibrator Notices scan reading
Display System TFT
Display Size 2.4 inch
No. of Dots 240 (horizontal) × 320 (vertical) (QVGA)
Dot Pitch 0.15mm (vertical) × 0.15mm (horizontal)
Gradation 65,536 colors
Display Font Scalable font
Backlight LED backlight
View Angle 80 degrees (right - left - up - down)
* Contrast: more than 10
Indicator LED 3-color (Red, Green, Blue) LED × 1
2-color (Red, Green) LED × 1
Input Keyboard With key backlight
Control Keys Power, Reset
Side (Trigger) Keys Center, L, R
WLAN Standards IEEE 802.11a/b/g/n
Type of Emission Spread spectrum communication system
Spread Spectrum
Modulation
802.11a/g/n: OFDM (Orthogonal Frequency Division Multiplexing) method
802.11b: DSSS (Direct Sequence Spread Spectrum) method
Modulation Method BPSK,QPSK,CCK,16QAM,64QAM
ITU code
(Emission Identifier)
802.11a/g/n: D1D, G1D
802.11b: G1D

— 11 —
Item Specifications
WLAN Radio Frequency
Center frequency
Frequency range
IEEE802.11a/n(5GHz)
W52: 36/40/44/48ch (5.18 ~ 5.24GHz)
W53: 52/56/60/64ch (5.26 ~ 5.32GHz)
W56: 100/104/108/112/116/120/124/128/132/136/140ch
(5.50 ~ 5.70GHz)
IEEE802.11b: 1 ~ 13ch (2.412 ~ 2.484GHz)
IEEE802.11g/n(2.4GHz): 1 ~ 13ch (2.412 ~ 2.472GHz)
IEEE802.11a/n(5GHz)
W52,W53: 5.15 ~ 5.35GHz
W56: 5.47 ~ 5.725GHz
IEEE802.11b: 2.400 ~ 2.497GHz
IEEE802.11g/n(2.4GHz): 2.400 ~ 2.4835GHz
Transmission Rate 802.11a/g: Max. 54Mbps
802.11b: Max. 11Mbps
802.11n: Max. 65Mbps
* Varies depending on the environment.
Transmission
Distance
802.11b/g/n(2.4GHz): In doors - 50m, Out of doors - 150m
802.11a/n(5GHz): In doors - 50m, Out of doors - 150m
* Varies depending on the environment and transmission rate.
No. of Channels 802.11a/n(5GHz)
W52,W53: 4ch
W56: 11ch
802.11b: 13ch
802.11g/n(2.4GHz): 13ch
Channel Interval 802.11a/n(5GHz): 20MHz
802.11b/g/n(2.4GHz): 5MHz
Channel Bandwidth 802.11a/b/g/n: 20MHz
Output 802.11a: Max. 14Mbps
802.11b: Max. 20Mbps
802.11g: Max. 15Mbps
802.11n: Max. 14Mbps
Other Function Roaming among multiple access points
* Depends on access point
Security Security: WEP(64/128bit)/WPA/WPA2WPA
Encryption scheme: TKIP/AES
Authentication method: PSK/EAP-TLS/PEAP-MSCHAP-V2

— 12 —
Item Specifications
Bluetooth
Communication
Class 2
Standard Bluetooth®Specification Ver.2.1+EDR
Type of Emission Spread spectrum communication system
Spread Spectrum
Modulation
FHSS (Frequency Hopping Spread Spectrum) method
Modulation Method GFSK (1MbpS), Π/4-dqpsk (2Mbps), 8-DPSK(3Mbps)
ITU Code
(Emission Identifier)
F1D,G1D
Radio Frequency 2.400 ~ 2.4835GHz
Transmission
Distance
Approx. 3 m
* Varies depending on the radio wave conditions and environment.
No. of Channels 79ch
Channel Interval 1MHz
Channel Bandwidth 1MHz
Output Max. 4dBm (PowerClass2)
Profile GAP, SDP, SPP(Client, Server),DUN, OBEX Object Push Profile
USB Host Transmission rate: Full speed (12 Mbps), Low speed (1.5 Mbps)
Client Transmission rate: Full speed (12 Mbps)
Speaker Monaural
Microphone Monaural
<
Power Supply/Data Communication Terminals
>
1 2 3 4
65
Pin No. Name Function Input/Output
1 D+ USB D+ IN / OUT
2 D– USB D– IN / OUT
3 USB_ID USB host/client switching IN
4 V BUS USB power -
5 GND GND -
6 V CRADLE Power supply/charge to DT-X200 -

— 13 —
<
Power
>
Item Specifications Remarks
Main Battery Lithium ion battery Standard/Large-capacity
Backup Battery Rechargeable lithium battery × 1 Built-in type
Operating Time
* Normal temperature
* Brand-new battery
Standard Battery Pack
- Laser model: Approx. 15 hours
- 2D model: Approx. 13.5 hours
Large-capacity Battery Pack
- Laser model: Approx. 26 hours
- 2D model: Approx. 23 hours
• CPU speed setting
= Automatic power saving mode
• Backlight = OFF
• Standby:Key input:Scan = 20:1:1
Standard Battery Pack
- Laser model: Approx. 10 hours
- 2D model: Approx. 9 hours
Large-capacity Battery Pack
- Laser model: Approx. 17 hours
- 2D model: Approx. 15 hours
• CPU speed setting
= Automatic power saving mode
• Backlight = OFF
• Standby:Key input:Scan:Wireless
= 20:1:1:1
Standard Battery Pack:
Approx. 5 hours
Large-capacity Battery Pack
Approx. 9 hours
• CPU speed setting
= Automatic power saving mode
• Backlight = TYP
• Wireless LAN power = ON
• Bluetooth power = ON
• Automatic power OFF = Disabled
• Auto dimmer = Disabled
• Automatic backlight OFF = Disabled
• Standby:Key input:Scan:Wlan:Bluetooth
= 467:140:59:49:5
Backup Time
(Backup Battery only)
RAM: 10 minutes
RTC: 72 hours or more
• Normal temperature
• Backup battery is fully charged.
Backup Time
(Main Battery +
Backup Battery)
RAM: Approx. 72 hours • After a main-battery remaining alarm occurs.
Main Battery Charge
Time
Standard Battery Pack:
Approx. 3 hours
Large-capacity Battery Pack
Approx. 5.5 hours
• Normal temperature
• Power = OFF
Standard Battery Pack
- In 30 minutes after battery alarm, charged up
to 50%.
- In 10 minutes, charged to the amount worth 1
hour (50 minutes or more) operation .
Backup Battery
Charge Time
Approx. 4 days • Normal temperature
• Time required to be fully charged with the Main
Battery is installed.

— 14 —
<
Dimensions
>
Approx. 53mm
(Display)
Approx. 51mm
(Grip)
Approx. 24mm
(Display)
Approx. 169mm
Approx. 31mm
(Grip)
<
Weight
>
Approximotely 175g
(when standard battery pack and bumper are installed)
Approximotely 195g
(when Large-capacity battery pack and bumper are installed)

— 15 —
2-5. Mouse emulator function
The mouse emulator function lets you make settings and adjustments by using a mouse cursor.
To use this function, activate it as follows.
YActivating the mouse emulator function
• While no mouse cursor is shown on the screen, press the “Fn” key followed by the “4” key. The mouse
cursor appears, and the mouse emulator function is now active.
* To turn off the function, press the same key sequence again, i.e. “Fn” key “4” key.
* Each push of this key sequence toggles the function between on and off.
YUsing the mouse cursor
Activate the mouse emulator function as described above.
Mouse cursor movement
• Press a numeric key for the direction in which you want to move the mouse cursor.
Mouse cursor moves in the arrow direction.
* Holding down a key moves the mouse cursor continuously.
Left click
This serves for selecting a file, making a menu selection, or a similar action.
• Move the mouse cursor to the position where you want to click, and press the “5” key.
Right click (calling up a menu)
• Move the mouse cursor to the position where you want to click, and press the Trigger R key.
Left double click
Performing this action while the mouse cursor is on an icon starts an application, opens a file, etc.
•
Move the mouse cursor to the position where you want to double click, and press the “5” key twice.
* The double click timing follows the double tap setting of Windows CE. The setting can be changed by
accessing the “Mouse” icon in the Control Panel.
Dragging
This action allows you to move an application icon on the screen or a file or folder in File Explorer.
•
Move the mouse cursor to the position where you want to start dragging, and press the “5” key. Then move
the mouse cursor by holding down the “5” key and pressing another numeric key for the direction in which
you want to move. The selected item will be dragged along with the cursor. When you release the “5” key,
the item is dropped at the current location.

— 16 —
3. RESET
When a power on factor occurs, resume or reset is used to start the system.
A reset clears program execution status. Therefore, data on the RAM in work is discarded, because there is a
possibility that in the middle of writing a file is corrupt, you need to be careful. Resume, will return to the program
execution state before power OFF.
(1) Resume
If the device has had its power turned off (to suspend) normally, it resumes the next time its power is turned
on. Resume, and continue the process that was running the last of the power supply is OFF. Program
execution memory in RAM, unsaved data in use, and data in data storage memory and FlashDisk are
retained.
(2) Reset
When you press the RESET button, or you can run when you perform a soft reset function.
Running program is discontinued, after shutdown process, and then run the reboot of the OS. Root disk (¥, ¥
Windows folder, etc.) and registry information, FlashDisk, data on the SD card will be retained.
[Caution]
(1) If you lock the system during the reset process (when no response time is more than about 10 seconds),
it will be forced to reset by skipping the shutdown process.
(2) When not restarting the body even if a RESET button is pressed, please do the following operation."CLR"
while a key and a "0" key are being pushed, a RESET button in the body back is pressed.
(3) Full reset
This occurs if both Power and CLR keys are held down at the same time and then the Reset button is
pressed for a period of one second or longer, by default, while the terminal is in operation.
Running program is discontinued, after shutdown process, and then restart the OS.
In this situation, the confirmation message “OK to clear?” is displayed twice. Use the right trigger key and left
trigger key to confirm. If the right trigger key is pressed in response to both times the confirmation message
is displayed, the memory (data storage memory, and OS and program execution memory) is cleared, and
initialization is performed. However, data on FlashDisk is retained.

— 17 —
(4) User disk clear
Press the Reset button for a period of one second or longer while the Fn key, CLR key, and the period key
are pressed. Full reset and similar warning screen appears.
Operation is also the same. Root disk (¥, ¥ Windows folder, etc.) and the registry, is initialized to the factory
default state. After formatting the FlashDisk, you can start it and then re-load the OS to RAM do the reset
process.
(Such as patch that is placed on a FlashDisk (CAB file) also disappears.)
[Caution]
The format of FlashDisk, takes time. Therefore, when you press the power button immediately after DISK
clear, there are times when it does not start device. In this case, please perform the operation after waiting
for a while.
(5) Power-on reset
This happens if there is no external power supply (AC) and the main battery are not in place, so the unit has
absolutely no battery power (discharged), and then a battery is fitted into the unit.
All RAM data storage memory (data and databases saved by the user, applications installed in RAM, etc.),
program execution memory used by the OS and applications, and memory used by drivers are all “completely
initialized” (clear). However, data on FlashDisk is retained.
RAM 4 minutes in a state of disconnect the battery, clock, 72 hours will be backed up.
(I call the state that holds only watch and RTC backup state).