Casio V-REGI Series User manual

V-REGI series
Store support system
Standard package
Sales management
Time card System Reference Manual
V-R7000
V-R100
1

2
Contents
1. .....................................................................................5Introduction of Time card System
1.1. .................................................................................................................... 5Outline of the system
1.2. ......................................................................................................... 6System data configuration
1.3. ........................................................................................................................... 7System Operation
1.4. ...................................................................................... 8Caution for using System Operation
2. .................................................................................................... 10Setting time card system
2.1. ............................................................................................................. 10About Employee setting
2.2. ...........................................................................................................................11Time card setting
2.3. ................................................................................................................................. 12Time card key
2.4. ........................................................................................................... 14Time card device setting
3. .............................................................................................. 17Operation time card system
3.1. .............................................................................................................................. 17Enter time card
3.2. ........................................................................................................................... 18Time card report
3.3. .................................................................................................................... 19Move time card data
4. ........................................... 21Relationship with your Time and Attendance system
4.1. ............................................................................................................................................... 21Outline
4.2. ..................................................................................................................... 21TIMECARDBACK.DB
4.3. ................................................................................................................................... 21Convert data

3
Introduction
This manual explains functions and operation of Stock System.
Take advance notice
The copyrights for this manual, as well as all rights related to the software noted in this
manual are the property of CASIO Computer Co., Ltd.
The unauthorized reproduction of this manual in whole or part is prohibited without the
express, written permission of CASIO
The content of this manual may change without prior notice due to improvements to the
product and/or changes in their specifications.

4
SECTION 1
Introduction of
Time card System

1. Introduction of Time card System
1.1. Outline of the system
V-REGI Time card System offer management of employee IN/OUT information.
Move the detail to internal storage or SD
card.
Move detail
The database which has time card
operational detail.
Time card detail
Report current status and time card
operational detail.
Time card report
Enter and update time card.
Enter Time card
Set the Employee and Time card system
settings.
Time card setting
V-REGI Time card System works only for stand-alone.
V-REGI Time card System logs time card operation and can send to your time and
attendance system or software.
5

1.2. System data configuration
Time card settings:
CKA001 (Time and Attendance master) has setting of employee code and name. CKB001
(Time & Attendance setting) has setting for Time card system.
Time card status:
CKT001 (Time & Attendance status) has current employee status for time card operation.
Time card detail:
CKT002 (Time & Attendance detail) has operational detail of time card operation. CKT012
(Time & Attendance backup) is backup inside internal storage (or SD card).
Also can be printed Time card status and detail.
CKA001
CKB001
CKT002 CKT001
CKT012
Time card status inside
Time card setting
Move detail
operation
Time card
operation
Backup internal
storage or SD card
6

7
1.3. System Operation
Time card operation flow is as below.
<Install>
Set employee code and name by Time and Attendance master.
Set time card system by Time & Attendance setting.
Set time card key, time card setting and time card report on keyboard.
<When employee IN>
Open time card and set IN.
Also can be used scanner.
< When employee OUT>
Open time card and set OUT.
Also can be used scanner.
<Check current status>
Use time card report and print current status.
<Move detail>
Operate move detail for move inside time card operation detail to outside internal storage
or SD card.
<Use detail>
Get detail data from internal storage or SD card and send to your time and attendance
system. Before send to your system normally need to convert format adjust your system.
Casio does not have time and attendance system then please prepare by yourself.

8
1.4. Caution for using System Operation
Target of employee:
Target of employee is worker of shop, not only cash register operator. V-REGI Time card
system now has no relationship to cash register clerk.
About work type:
Work time is used for your time and attendance system. V-REGI Time card system has no
relationship to work type.
Operation of time card:
Operation types of time card are not only IN/OU but also BREKA-IN/OUT and
OUTSIDE/BACK. These operations do not check the integrity so can be operated at any
situation.
About move detail:
Move detail can be operated by manually. Also it can be operated by Open or Z
automatically.

9
SECTION 2
Setting Time card System

2. Setting time card system
2.1. About Employee setting
Before using time card system, please set time card settings.
All of time card settings are located at time card setting menu.
First, please set target employee at Employee setting. The employee and cash register clerk
has no relationship.
10

2.2. Time card setting
Before using time card system, please set time card setting.
Time card stock has some menu and select contents.
NO. Menu Contents
1 Time card screen type.
Preset time card screen style.
0: Enter by employee code.
1: Show touch key (Automatic layout)
2: Show touch key (Manual layout)
3: Use barcode system
Using “Show touch key (Manual layout)” and “Use
barcode system” need preset of CKB003 (Time and
attendance device setting) by DB settings.
2 Time card receipt.
Preset time card operation receipt.
0: Not issue receipt.
1: Issue receipt.
Any setting logs to EJ.
3 Write to time card detail.
Preset as logs detail or not for time card operation.
0: Log detail.
1: Not log detail.
In case of Log detail, also move detail operation is needed.
4 Time card data move timing.
Preset timing of move detail.
0: Not move automatically.
1: Move to internal storage (SD) when open.
2: Move to internal storage (SD) when Z.
5 Use break-IN/OUT. Preset using break-in/out system. 0: Invalid (not use break-in/out)
1: Valid (use break-in/out)
6 Use Outside/Back. Preset using outside/back system. 0: Invalid (not use outside/back)
1: Valid (use outside/back)
11

12
2.3. Time card key
Time card key can be set Top Menu setting of Function key.
Time card key: Function code 300340
Time card setting key: Function code 300341
Time card report key: Function code 300342
Time card key is used not only Cash register clerk but also store employee. Some times it is
requested locate time card key on sign off screen. Below operation can set key on sign off
screen.
1. Create new function key.
Locate new time card key by using Function key setting. Check Key Code (Funckeycode)
value.
2. Update CSB022 by DB settings.
Updating CSB022 can create new key on sign off screen. Updating by DB setting is difficult
so please ask SQL professional to create SQL script and use DB management running
Script Execution.
Sample of setting CSB022 for V-R100
Field name Data example Remarks
SHEETTYPE FUNCTION Keyword
SHEETNUMBER 2 It means bottom of sign off screen.
SHEETARRANGE 1 Any layout
SHEETSEQCODE 1 1st key of this area
CONTROLTYPE FunctionButton Keyword
THEME Standard Keyword
CODE (target funckeycode) Same as CSB002 funckeycode
USECOORDINATE 1 Use x/y location
POSITIONX 250 Any X location inside area
POSITIONY 3 Any Y location inside area
WIDTH 186 Any key width
HEIGHT 54 Any key height
LABEL null Use CSB002 label
FOREGROUNDCOLOR -1 Any color code
BACKGROUNDCOLOR -8413952 Any color code
OPTIONCOLOR 0
IMAGEFLAG 1 Not use image
BGIMGCONTROLTYPE null
BGIMGTHEME null
BGIMGCODE null
FONTSIZE 22 Any
OPERATIONMODE null

13
DISPMODE null
REMARKS -
CREATEDATETIME 20141231123456 YYYYMMDDHHMMSS
UPDATEDATETIME 20141231123456 YYYYMMDDHHMMSS
Sample of V-R100 script) (Also can be used for V-R7000 adjusting x/y)
INSERT OR REPLACE INTO "CSB022"
VALUES('FUNCTION',2,1,1,'FunctionButton','Standard','400001','1',250,3,186,54,NULL,-1,-841
3952,0,'1',NULL,NULL,NULL,22,NULL,NULL,'-','20141118162347','20141118162347');
For more detail, please purchase database kit.

14
2.4. Time card device setting
Using “Show touch key (Manual layout)” or “Use barcode system” of Time card screen type,
it needs preset CKB004 (Time and attendance device master) or CKB003 (Time and
attendance device setting).
1. “Show touch key (Manual layout)”
It needs update CKB004 (Time and attendance device master) and recode for each
employee touch key on time card screen.
CKB004 (Time and attendance device master) for each employee
Field name Data Remarks
TACODE Full Employee code without zero suppresses. Same code as CKA001
Employee code
TADEVTYPE Set 01 01 means touch key
TADEVCODE Set TTKK 4 digits value.
TT is tab location starting from 00 and goto
01, 02, etc.
KK is key location inside tabs. Left-top is 01
and next is 02. Reached to most right goes to
next line.

15
2. “Use barcode system”
It needs update CKB003 (Time and attendance device setting) for using EAN 13 in-store
barcode with employee code inside. Get Employee code from barcode will be expanded as
10 digits employee code and search database.
For example, barcode “2000037145734” means employee code “00037” if set as starting
from 3 digits and width 5 digits, and search database with “0000000037”.
CKB003 (Time and attendance device setting) property value of TADEVTYPE=20.
Field name Data Remarks
1 to 2 location Barcode flag value for EAN 13 top 2 digits. Above example is 20
3 to 4 location Offset of employee code location inside
barcode. Start of barcode is 1.
Above example is 03
5 to 6 location Length of employee code inside barcode. Above example is 05

16
SECTION 3
Operation Time card System

17
3. Operation time card system
3.1. Enter time card
Entering time card needs to specify employee code and select target operation as IN or OUT.
Also can be used touch key or barcode.
Entered by code uses employee code and select operation.
Touch key type touch target employee key and select operation.
Barcode type scans barcode and select operation.
After fixed operation, can issue receipt and check it depends on setting.
Time card system does not check the integrity so you can operate IN and IN.

18
3.2. Time card report
Time card report can print time card status and operational detail.
Select report type and Enter to show report. Also print key prints report.
Report type Report meaning
Time card status Print current time card status of CKT001. Time card status is not cleared then
print all of employee used past.
Time card detail Print all of detail of CKT002 from past moved.
Internal storage (SD) detail data CKT012 is not printed.

19
3.3. Move time card data
Time card detail (CKT002) loges inside application and it need to move to internal storage
(SD) regularly.
How to move detail data is as below types.
Operate manually by using “Move time card data”.
Automatic by Open operation.
Automatic by Z operation.
Once move to internal storage (SD), database table becomes CKT012.

20
SECTION 4
Relationship with
your Time and Attendance system