Casio 5696EN User manual

© 2022 CASIO COMPUTER CO., LTD.
MA2206-A
User’s Guide
Watch
5696 EN

Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is
designed, carefully read and follow the instructions in this manual, especially the
information under “Operating Precautions” and “User Maintenance”.

EN-1
About This Manual
•Depending on the model of your watch, display text
appears either as dark figures on a light background, or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
•Button operations are indicated using the letters shown
in the illustration.
•Each section of this manual provides you with the
information you need to perform operations in each
mode.
•Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.

EN-2
Contents
About This Manual.............................................................................................. EN-1
Watch Features................................................................................................... EN-4
Configuring Time and Date Settings................................................................. EN-5
To configure the digital time settings...............................................................EN-5
To configure date settings ...............................................................................EN-7
To adjust the analog time setting.....................................................................EN-8
Selecting a Mode................................................................................................ EN-9
Alarm.................................................................................................................. EN-11
To configure alarm and hourly time signal settings........................................EN-11
To stop the alarm ...........................................................................................EN-14
To test the alarm ............................................................................................EN-14
Dual Time .......................................................................................................... EN-15
To configure Dual Time settings ....................................................................EN-15

EN-3
Stopwatch ......................................................................................................... EN-18
To measure elapsed time...............................................................................EN-18
Main Indicators ................................................................................................. EN-19
Specifications ................................................................................................... EN-20
Operating Precautions ..................................................................................... EN-22
User Maintenance ............................................................................................ EN-33

EN-4
Watch Features
◆Dual Time
Dual Time lets you keep track of the current time in another time zone in addition
to your current location’s time.
◆Alarm
◆Stopwatch

EN-5
Configuring Time and Date Settings
To configure the digital time settings
1. In the Timekeeping Mode, hold down Afor at least
two seconds. This causes the seconds to flash on the
display.
2. Press Ato move the flashing in the sequence shown
below to select a setting.
Timekeeping Mode Second
12/24-Hour Format HourMinute
A A
A
A(Two seconds)
A
PM indicator

EN-6
3. Use Bto change the selected setting.
Screen This setting item:
Reset the second to 00
•30 to 59 seconds: Adds 1 to minutes
Change the hour or minute
•Holding down Bchanges the current selection at high speed.
Toggle between 12-hour (12H) and 24-hour (24H) timekeeping
4. Press Ato return to the Timekeeping Mode.
The setting operation is complete when the screen stops flashing.
•The watch returns to the Timekeeping Mode automatically if you do not perform
any button operation for one or two minutes in the setting screen.

EN-7
To configure date settings
1. In the Date Mode, hold down Afor at least two
seconds. This causes the month to flash.
2. Use Ato select the setting item you want to change.
Date Mode Month
Day of the week Day
A A
A
A(Two seconds)
3. Press Bto change the currently selected setting.
•Holding down Bscrolls the setting at high speed.
Month
Day
Day of the week

EN-8
4. Press Ato return to the Date Mode.
The setting operation is complete when the screen stops flashing.
•The watch will automatically return to the Timekeeping Mode if you do not perform
any button operation for one or two minutes.
•The Auto Calendar automatically distinguishes between months of different lengths.
You do not need to change the setting except for leap years or after replacing the
watch’s battery.
To adjust the analog time setting
In any mode, press Cto advance the time setting by
20seconds.
•Holding down Cadvances the setting at high speed.