Cateye STRADA CADENCE CC-RD200 User manual

Click the button and follow the in-
structions.
CATEYE STRADA CADENCE
CC-RD200
Quick Start
START

Thank you for purchasing our cyclocomputer CATEYE STRADA.
This Quick Start Manual explains how to set up the computer and how to install the unit on
your bicycle.
Please set up the unit according to the specified procedure, then it will be ready for use as a
cyclocomputer.
Before use, read the instruction manual that comes with the product thoroughly
to the end to understand the functions of this unit, and to use it safely in a
correct manner.
Next

This PDF contains a movie file.
When you click on the movie screen, a message regarding security appears. Click the
“Trust in the text” or “Play” button to close the message.
Click the screen again to play the movie.
Next

CATEYE STRADA CADENCE
Quick Start Manual Contents
Click the item you wish to view.
Return to Cover
Setting up the computer
How to install the sensor
How to install the bracket (movie)

Operation of buttons
Set up the computer by operating the buttons as follows.
Check the button position before you start setting up.
MODE
MENU
Back
Press the MENU button and the MODE
button on the back of the computer.
Next

CATEYE STRADA CADENCE
Quick Start Manual Setting up the computer
Setting the speed unit
Entering the tire
circumference
Setting the clock display
Measuring screen
(Setup completed)
Setting the hour
Setting the minute
Clear all data (initialization) Clear all data (initialization)
Press the AC button on the back of the computer.
After full lighting of the screen, the computer switch-
es to the speed unit setting screen to start setup.
ACAC
Full lighting Setting the speed unit
Return to Contents
Next
Return

CATEYE STRADA CADENCE
Quick Start Manual Setting up the computer
Entering the tire
circumference
Setting the clock display
Measuring screen
(Setup completed)
Setting the hour
Setting the minute
Setting the speed unit
Clear all data (initialization)
Setting the speed unit
Setting the speed unit
When the MODE button is pressed, either “km/h” or “mph”
is selected for the speed unit display. Select the display of
your choice.
After selecting, press the MENU button to proceed to the
next step “Entering the tire circumference”.
MENU
To the next step
MODE
km/h ↔mph
Return to Contents
Next
Return

CATEYE STRADA CADENCE
Quick Start Manual Setting up the computer
Setting the clock display
Measuring screen
(Setup completed)
Setting the hour
Setting the minute
Entering the tire
circumference
Setting the speed unit
Clear all data (initialization) Entering the tire circumference
Enter the tire circumference (mm) of your bicycle with 4
digits using the tire circumference reference table.
Pressing the MODE button increases the value flashing,
and pressing and holding the MODE button moves to the
next digit.
After entering, press the MENU button to proceed to the
next step “Setting the clock display”.
Entering the tire
circumference Move digitTo the next step
MENU
To the next step
MODE
MODE
(Press and hold)
Return to Contents
Next
Return
Tire circum-
ference refer-
ence table

CATEYE STRADA CADENCE
Quick Start Manual Setting up the computer
Measuring screen
(Setup completed)
Setting the hour
Setting the minute
Setting the clock display
Entering the tire
circumference
Setting the speed unit
Clear all data (initialization) Setting the clock display
When you press and hold the MODE button, “24h” flashes.
When the MODE button is pressed, either “12h” or “24h”
is selected for the clock display. Select the display of
your choice.
After selecting, press and hold the MODE button to pro-
ceed to the next step “Setting the hour”.
Clock display
To the next step
MODE
24h ↔12h
MODE
(Press and hold)
Return to Contents
Next
Return

CATEYE STRADA CADENCE
Quick Start Manual Setting up the computer
Measuring screen
(Setup completed)
Setting the minute
Setting the hour
Setting the clock display
Entering the tire
circumference
Setting the speed unit
Clear all data (initialization) Setting the hour
Pressing the MODE button increases the value flashing
(“Hour” of the clock). Enter any value.
After entering, press and hold the MODE button to pro-
ceed to the next step “Setting the minute”.
Hour
To the next step
MODE
To the next step
MODE
(Press and hold)
Return to Contents
Next
Return

CATEYE STRADA CADENCE
Quick Start Manual Setting up the computer
Measuring screen
(Setup completed)
Setting the minute
Setting the hour
Setting the clock display
Entering the tire
circumference
Setting the speed unit
Clear all data (initialization) Setting the minute
Pressing the MODE button increases the value flashing
(“Minute” of the clock). Enter any value (Pressing and
holding MODE rapidly increases the value).
After entering, press the MENU button to switch to the
measuring screen.
Minute
MENU
Setup is completed
To the measuring screen
MODE
To the next step
Return to Contents
Next
Return

CATEYE STRADA CADENCE
Quick Start Manual Setting up the computer
Measuring screen
(Setup completed)
Setting the minute
Setting the hour
Setting the clock display
Entering the tire
circumference
Setting the speed unit
Clear all data (initialization) Now, setup of the computer is completed.
If the bracket and sensor are not installed on your bicycle,
return to Contents, click “How to install the bracket” and
How to install the sensor”, and then install them accord-
ing to the instructions.
Measuring screen
Return to Contents
Next
Return
Return to Contents

CATEYE STRADA CADENCE
Quick Start Manual How to install the bracket
The Bracket being used in this movie is for wireless products and• there is no wire attached.
When you install the bracket band to your bicycle, tighten it so the wire will not be pinched by the stem•
or handlebar.
Return to Contents

Prepare the following parts from the packaged items.
Speed sensor
Cadence sensor
Wheel magnet Cadence magnet
Sensor rubber pad
Nylon ties (x10)
Next

CATEYE STRADA CADENCE
Quick Start Manual How to install the sensor
Install the wheel magnet
Install the cadence sensor
Install the cadence magnet
Adjust the positions of the
sensor and magnet
Adjust the clearance between
the sensor and magnet
Route the cable
Fixing the sensor and magnet
(Installation is completed)
Install the speed sensor Install the speed sensor
Temporarily secure the speed sensor to the inside
of the left chain stay of your bicycle with two nylon
ties.
Tighten the speed sensor to such an extent that it
can be moved.
Left Chain Stay
Front
Speed sensor Nylon ties
Return to Contents
Next
Return

CATEYE STRADA CADENCE
Quick Start Manual How to install the sensor
Install the cadence sensor
Install the cadence magnet
Adjust the positions of the
sensor and magnet
Adjust the clearance between
the sensor and magnet
Route the cable
Fixing the sensor and magnet
(Installation is completed)
Install the wheel magnet
Install the speed sensor Install the wheel magnet
Temporarily secure the wheel magnet to the left
spoke of the rear wheel.
Tighten the wheel magnet to such an extent that it
can be moved.
Rear wheel spoke
Wheel magnet
Speed sensor
To the SENSOR LINE
Return to Contents
Next
Return

CATEYE STRADA CADENCE
Quick Start Manual How to install the sensor
Install the cadence magnet
Adjust the positions of the
sensor and magnet
Adjust the clearance between
the sensor and magnet
Route the cable
Fixing the sensor and magnet
(Installation is completed)
Install the cadence sensor
Install the wheel magnet
Install the speed sensor Install the cadence sensor
Temporarily secure the cadence sensor to the out-
side of the left chain stay of your bicycle with two
nylon ties.
When the clearance with the cadence magnet is*
more than 3 mm, install the cadence sensor with
sensor rubber pads in layers. When temporarily
securing, keep allowance for sensor rubber pads.
Left Chain Stay
Cadence sensor
Nylon ties
Front
Return to Contents
Next
Return

CATEYE STRADA CADENCE
Quick Start Manual How to install the sensor
Adjust the positions of the
sensor and magnet
Adjust the clearance between
the sensor and magnet
Route the cable
Fixing the sensor and magnet
(Installation is completed)
Install the cadence magnet
Install the cadence sensor
Install the wheel magnet
Install the speed sensor Install the cadence magnet
Temporarily secure the cadence magnet to the in-
side of the left crank with nylon ties.
Tighten the cadence magnet to such an extent that
it can be moved.
Left crank (Inside)
Nylon ties
Cadence magnet
Cadence sensor
To the SENSOR LINE
Return to Contents
Next
Return

CATEYE STRADA CADENCE
Quick Start Manual How to install the sensor
Adjust the clearance between
the sensor and magnet
Route the cable
Fixing the sensor and magnet
(Installation is completed)
Install the cadence magnet
Install the cadence sensor
Install the wheel magnet
Install the speed sensor
Adjust the positions of the sensor and magnet
Adjust the positions so that the wheel magnet pass-
es through the SENSOR LINE of the speed sen-
sor, and the cadence magnet passes through the
SENSOR LINE of the cadence sensor.
Wheel magnet
Cadence
magnet
SENSOR LINE
(Speed sensor)
SENSOR LINE
(Cadence sensor)
Adjust the positions of the
sensor and magnet
Return to Contents
Next
Return

CATEYE STRADA CADENCE
Quick Start Manual How to install the sensor
Route the cable
Fixing the sensor and magnet
(Installation is completed)
Adjust the clearance between
the sensor and magnet
Install the cadence magnet
Install the cadence sensor
Install the wheel magnet
Install the speed sensor
3 mm
Adjust the clearance between the sen-
sor and magnet
Adjust the clearances between the speed sensor and
wheel magnet and the cadence sensor and cadence
magnet, so that both of them are within 3 mm.
When the clearance between the cadence sensor*
and cadence magnet is more than 3 mm, install the
cadence sensor with sensor rubber pads in layers.
3 mm
Left Chain Stay (Outside) Left Chain Stay (Inside)
Cadence sensor
Speed sensor
Wheel magnet
Cadence magnet
Adjust the positions of the
sensor and magnet
Return to Contents
Next
Return