
10 USING YOUR KE 550 KETTLE
BEFORE FIRST USE
Before rst use, remove all packaging
and advertising labels/stickers from the
appliance.
Before using the kettle for the rst time, allow
the kettle to boil clean water. Fill the cattle
with clean water, bring to aboil and then
pour the water out. Repeat this procedure
3 to 4 times. The kettle is then ready for
use. Your kettle will only operate correctly if
placed on its base connected to an electric
outlet. As soon as the water boils, the kettle
will switch o automatically.
USING YOUR KETTLE
To ll the kettle with water, remove it from
the base and press the button to open the
lid. Fill the kettle with the required amount
of water. Do not ll the kettle below the
minimum or above the maximum level
mark. Lack of water would lead to turning
the kettle o before boiling. If the kettle is
overlled, the boiling water might splash out.
Closed lid and make sure it’srmly secured.
Place the kettle on its base. Insert the mains
cord plug into apower socket.
Press the desired temperature button (70°C,
80°C, 90°C or 100°C) and then press the
.
As soon as the water boils, the kettle will
switch o automatically. Take the kettle
from the base and pour water in cup, mug
or other container. To boil water repeatedly,
it’snecessary to wait afew seconds for the
heating element to cool down.
Do not start or use the kettle without water.
Incorrect use of the appliance may negatively
aect its lifetime.
If the kettle is not to be used, unplug the
power cord from the socket. You may store
the kettle on the base if it’snot to be used.
WARNING!
Never fill the kettle if it is
located on the base.
NOTE:
This kettle should be used only with
the supplied base. When pouring out
water from the kettle, be careful to
avoid scalding with hot water. Do not
pour water too fast.
WARNING!
THIS APPLIANCE HAS
BEEN DESIGNED ONLY FOR
BOILING DRINKING WATER. DO NOT
USE THIS APPLIANCE TO COOK OTHER
LIQUIDS OR FOODS. BEFORE TURNING
THE KETTLE ON, ALWAYS MAKE SURE
THAT THE LID IS FIRMLY CLOSED.
DO NOT OPERATE THE LID RELEASE
BUTTON WHILE THE WATER IS HEATING
OR AFTER IT HAS FINISHED HEATING.
THIS COULD CAUSE THE WATER TO
SPLASH OUT. BEFORE OPENING THE
LID, PLEASE EMPTY THE KETTLE.
USING YOUR KE 550 KETTLE