Catler KE 8110 CH User manual

THERMO VACUUM ELECTRIC KETTLE
KE 8110 CH
Instruction Manual
THERMO VACUUM
ELECTRIC KETTLE
Návod kobsluze
VAKUOVÁ RYCHLOVARNÁ
TERMO KONVICE
Návod na obsluhu
VÁKUOVÁ RÝCHLOVARNÁ
TERMOKANVICA

THERMO
VACUUM
ELECTRIC
KETTLE

TABLE OF CONTENTS 1
TABLE OF CONTENTS
3 Your safety rst
11 Know your new KE 8110 CH kettle
14 Operating your KE 8110 CH kettle
18 Care and cleaning

CONGRATULATIONS
Congratulations
for the purchase of your new KE 8110 CH kettle.
2

3
CATLER RECOMMENDS SAFETY FIRST
CATLER RECOMMENDS SAFETY FIRST
We understand the importance of safety and that’swhy we put your
safety rst from the initial design concept to the production itself.
Nevertheless, please be careful and follow the instructions below
while using this appliance:
• This appliance may be used by children 8 years
of age and older and by persons with physical
or mental impairments or by inexperienced
persons, if they are properly supervised or
have been informed about how to use of the
product in asafe manner and understand the
potential dangers.
• Children must not play with the appliance.
• If the power cord is damaged, have it replaced
in aprofessional service centre in order to
prevent adangerous situation. It is forbidden
to use the appliance with the power cord
damaged.
• User cleaning and maintenance must not be
performed by children unless they are older
than 8 years of age and kept under supervision.
Keep the appliance and its power cord out of
children under 8.
• This appliance is designed for domestic use and
similar premises, such as:
– kitchenettes in stores, oces and other
workplaces;

4CATLER RECOMMENDS SAFETY FIRST
– agriculture;
– guests in hotels, motels and other dwelling
locations;
– bed and breakfast businesses.
• If the electric kettle is overlled, boiling water
could splash out.
WARNING:
WHEN PLACING THE KETTLE ON AND
REMOVING FROM THE BASE, MAKE
SURE THAT THE CONNECTOR DOES
NOT COME INTO CONTACT WITH
WATER.
• Wipe the surfaces that come into contact with
food with asoft sponge slightly moistened in
clean water. Perform the cleaning in accordance
with the instructions in the Cleaning and
maintenance chapter.
WARNING:
INCORRECT USE MAY LEAD TO INJURY.
• The heating element and the kettle body
surface is hot after use due to residual heat. Do
not touch hot surface.
• Before rst use, make sure that the voltage in
your power socket matches the nameplate

5
CATLER RECOMMENDS SAFETY FIRST
voltage on the unit bottom. In case of any
doubt, please contact aqualied electrician.
• Before operating your appliance, read all the
instructions carefully and store them in asafe
place for possible future reference.
• Before using the appliance for the rst time,
please remove all packaging and ad stickers
and discard them in an environmentally safe
manner. Check the appliance for any defects.
Under no circumstances should you use
adamaged appliance or an appliance with
adamaged power cord etc.
• To eliminate the risk of small children
suocating, remove the protective cover of the
power plug from this appliance and dispose of
it safely.
• This appliance has been designed only for
boiling drinking water. Never use the appliance
to warm up other liquids or food. Use the
appliance only for the purposes for which it has
been designed. Do not use it outdoors.
• Always put the electric kettle on astable,
even and dry surface. Do not place the kettle
on windowsills, sink drip tray or on unstable
surfaces. Do not operate the appliance on the
edge of adesktop or atable.

6CATLER RECOMMENDS SAFETY FIRST
• Do not put the kettle on or the vicinity of any
devices and equipment that generate heat.
• Never use the kettle in the near vicinity of
abath, shower or swimming pool.
• Do not place the appliance near walls, curtains
or other substances sensitive to heat or steam.
Please observe aminimum distance of 20cm
from such surfaces.
• Use the kettle only with the base designed for
and supplied with this type of kettle. Do not
use the base supplied with this kettle for other
types of kettles.
• Do not use this appliance with aprogrammable
switch, timer switch or any other device that
automatically switches the appliance on.
• Always remove the kettle from its base before
lling.
• When lling the kettle, make sure that the
water level covers at least the minimum level
mark but doesn’t exceed the maximum level
mark.
• Before turning the kettle on, make sure that the
lid is closed properly. Do not open or otherwise
handle the lid while water is boiling.
• To lift and/or carry the electric kettle, please use
the handle.

7
CATLER RECOMMENDS SAFETY FIRST
• Do not put any subjects on the lid.
• Never touch the appliance with wet or damp
hands.
• Do not leave the appliance unattended while in
operation.
• Before removing the kettle from its base, make
sure that it has been turned o.
• Take great care to avoid scalding with boiling
water or steam while pouring out water from
the kettle.
• Always turn the kettle o and unplug from
the power socket if you leave it unattended, if
it’snot to be used or before moving or cleaning.
• When disconnecting the kettle from the mains
socket, always pull the plug, not the power
cord. Otherwise, damage to the power cord or
the socket could occur.
• Aconnected power outlet must be easily
accessible for possible sudden disconnection.
Before connecting your appliance to apower
outlet and turning it on, make sure it’sfully and
correctly assembled. Follow the instructions
provided in this user'smanual.
• Do not wash the kettle, base, mains cord and
plug under running water and do not immerse
them in water or any other liquid.

8CATLER RECOMMENDS SAFETY FIRST
• Do not use harsh abrasive or caustic detergents
to clean the appliance.
• Keep both inner and outer surface of
the appliance clean. Follow the cleaning
instructions provided in this user'smanual.
• Do not store or use any explosive and/or
ammable substances inside or in the vicinity
of this appliance, such as ammable gas sprays.
IMPORTANT SAFETY INSTRUCTIONS FOR
USING ELECTRICAL EQUIPMENT
• Fully unwind the power cord before use.
Connect the kettle only to aproperly grounded
socket.
• Do not leave the power cord hanging over the
edge of atable or countertop or allow it to
touch ahot surface or to become tangled up.
• For safety reasons, we recommend to connect
the appliance in an independent electrical
circuit separated from other appliances. Do
not use adapter plugs or extension cords to
connect the appliance to apower outlet.
• Do not use this appliance in moving vehicles
or on boats, outdoors, or for any purpose other
than intended. Otherwise, there is arisk of
personal injury.

9
CATLER RECOMMENDS SAFETY FIRST
• Any maintenance other than standard cleaning
must be performed at authorised Catler service
centre. To avoid the risk of electric shock, do
not repair and/or make any adjustments to the
electric kettle by yourselves.
• We recommend to install aresidual current
device (standard safety switches in your power
outlet) to provide ahigher level of protection
when using the appliance. We recommend to
install aresidual current device (with anominal
residual operating current of no more than
30mA) in the electric circuit in which your
appliance is to be connected. For further expert
advise, please contact your electrician.

10 CATLER RECOMMENDS SAFETY FIRST
WARNING:
NEITHER WASH THE KETTLE, ITS BASE,
ITS CORD OR CORD PLUG UNDER
RUNNING WATER NOR IMMERSE
THEM INTO WATER OR OTHER LIQUID.
DO NOT USE THE KETTLE ON AN
INCLINED SURFACE. DO NOT MOVE
THE KETTLE WHILE IT’SPLACED
ON ITS BASE AND TURNED ON.
ACONNECTED POWER SOCKET MUST
REMAIN EASILY ACCESSIBLE FOR
EASY DISCONNECTION.
WARNING:
FOR DOMESTIC USE ONLY.
DO NOT SUBMERGE IN WATER OR IN
ANY OTHER LIQUID.
FULLY UNWIND THE MAINS CORD
BEFORE USE.

11
Know your
KE 8110 CH kettle

12 KNOW YOUR KE 8110 CH KETTLE
KNOW YOUR KE 8110 CH KETTLE
7
1
6
8
2
3
4
5
1. Lid
2. Spout
3. Kettle body
4. Base with space to store the mains cord
5. Control panel
6. Lid handle with asafety switch
7. Lid lock
8. Kettle handle

13
KNOW YOUR KE 8110 CH KETTLE
CONTROL PANEL
12 3 45
1. The button is used to enable the KEEP WARM function.
2. - button (decrease temperature)
3. Display
4. + button (increase temperature)
5. The button is used to switch the kettle on or o.

14
Using your
KE 8110 CH kettle

15
OPERATING YOUR KE 8110 CH KETTLE
BEFORE FIRST USE
Before rst use, remove all packaging
and advertising labels / stickers from the
appliance. Before using the kettle for the rst
time, allow the kettle to boil clean water. Fill
the cattle with clean water, bring to aboil
and then pour the water out. Repeat this
procedure 3 to 4 times. The kettle is then
ready for use. Your kettle will only operate
correctly if placed on its base connected to an
electric outlet. As soon as the water boils, the
kettle will switch o automatically.
USING YOUR KETTLE
1. To ll the kettle with water, remove it
from its base and press the handle to
open the lid. This will release the lid
safety switch. Fill the kettle with the
required amount of water. Do not ll
the kettle below the minimum or above
the maximum level mark. Lack of water
would lead to turning the kettle o
before boiling. If the kettle is overlled,
the boiling water might splash out.
2. Closed lid and make sure it’srmly
secured. Place the kettle on its base.
Insert the mains cord plug into apower
socket. Ashort acoustic signal will sound.
The display will light, showing the current
temperature inside the kettle.
3. Press the button to turn the kettle
on. The display will show“HEAT”. Press +
or – to set the required temperature. You
can set the temperature in the range of
40°C to 100°C with 5°C increments. If no
required temperature is set, the kettle
will heat water to 100°C.
4. The kettle will start after the set
temperature has ashed three times on
the display. The display will show the
increasing temperature step-by-step
while the heating is in progress.
NOTE
If the dierence between the newly
set temperature and the kettle water
temperature is less than 5°C, the kettle
will not start. In such case, either
increase the set temperature or wait
until the kettle water temperature has
decreased.
NOTE
Never ll the kettle if it is located on
the base. Do not ll the kettle below
the minimum or above the maximum
level mark. Lack of water would lead
to turning the kettle o before boiling.
If the kettle is overlled, boiling water
may splash out.
NOTE
This kettle should be used only with
the supplied base. When pouring out
water from the kettle, be careful to
avoid scalding with hot water. Do not
pour water too fast.
5. As soon as the water boils the kettle will
turn o automatically and an acoustic
alert will sound. Remove the kettle from
its base and press the lid lock to pour
water in cup, mug or other container.
To boil water repeatedly, it’snecessary
to wait afew seconds for the heating
element to cool down.
6. To interrupt the water boiling process at
any time, press . The“HEAT”symbol will
disappear from the display and the kettle
will stop.
OPERATING YOUR KE 8110 CH KETTLE

16 OPERATING YOUR KE 8110 CH KETTLE
NOTE
Take great care while pouring water in
your cup. Never open the lid. Escaping
steam may cause burns.
Do not start or use the kettle without water.
Incorrect use of the appliance may negatively
aect its lifetime.
Thanks to the thermo insulated vacuum
layer, the boiled water will remain warm
longer in the kettle. In such condition, there
is no power consumption.
If the kettle is not to be used, unplug the
power cord from the socket. You may store
the kettle on the base if it’snot to be used.
KEEP WARM FUNCTION
Press the button and the display will
show“WARM”. Press + or – to set the
temperature you want the kettle to keep for
up to 4 hours. You can set the temperature
from 40°C to 100°C. The keep warm function
will start after the set temperature ashes
three times on the display.
NOTE
It the set temperature is 100°C, the
kettle will keep the maximum water
temperature of 97°C.
You can select the keep warm function both
while the water is being heated as well as
when it’sboiled.
The kettle will keep the last water
temperature set during heating except
for 100°C unless you set the required
temperature. If the last set temperature was
100°C, the kettle will keep the maximum
water temperature of 97°C.
This is asafety protection feature to
prevent water from boiling out of the
kettle completely, which leads to the kettle
damage.
While the keep warm function is enabled, the
kettle will turn on and o regularly. This is
anormal state when water is being heated to
the set temperature.
If you remove the kettle from its base, the
keep warm function will be automatically
disabled. If you need to restore the function,
put the kettle on the base, press and the
display will show“WARM”.
The kettle will turn o automatically after 4
hours of continuous operation in the keep
warm mode.
STANDBY MODE
The kettle will automatically switch to
standby mode after about 30 seconds of
inactivity. The display goes out in standby. To
cancel the standby mode, press any button
or lift the kettle.
NOTE
The“---” symbol on display indicates
that the kettle is not placed on the
base.

17
OPERATING YOUR KE 8110 CH KETTLE
WARNING
This appliance has
been designed only
for boiling drinking
water. Do not use
this appliance for
boiling liquids
other than water.
Before turning the
kettle on, always
make sure that the
lid is firmly closed.
Do not operate the
lid handle while
the water is being
heated or when the
heating is finished.
This could cause the
water to splash out.
Before opening the
lid, please empty
the kettle.
PROTECTION AGAINST EMPTY
OPERATION
The kettle is equipped with asafety device
to protect it against damage by overheating
and operating with insucient amount of/
without water. If you turn the kettle on by
mistake with insucient amount of water/no
water inside, the safety device will cut o the
power supply circuit automatically and turn
the kettle o when acertain temperature
is reached. You cannot turn the kettle back
on at this moment. Set the switch to the o
position and allow the kettle to cool down
before lling.
The kettle can be turned back on once it
has cooled down. The safety device will
reset automatically. In order to increase
the safety, the kettle is equipped with an
additional thermal fuse. Should the safety
device fail with subsequent overheating,
the kettle will automatically and irreversibly
turn o to prevent further damage. Should
such condition occur, please contact an
authorised service centre.

Care and cleaning