CB2 SIESTA User manual

hex wrench (included)
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Made in Vietnam - r08 Page 1 of 6
siesta BED
hardware
tools required
Thank you for purchasing the Siesta Bed. This
page lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components to this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are recommended to safely assemble this product.
Missing hardware? Please call
800.606.6387 for replacements.
2 - pins
4 - small
spring
washers
2 - large
screws
components
1 - headboard
rail
2 - side rails
(1 left, 1 right) 1 - center rail
3 - center
rail legs
2 - slat
assemblies
4 - small
flat washers
4 - hex bolts 4 - brackets
4 - large
bolts
2 - medium
bolts
4 - threaded
connectors
2 - small
bolts
12 - small
screws
allen wrench (included)
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
1 - head rail 1 - foot rail
2 - long legs
(1 left, 1 right)
2 - short legs
(1 left, 1 right)
flat head screwdriver
2 - uprights
10 - large
spring
washers
10 - large
flat washers

siesta BED
Fit 2 threaded connectors into left and right
side rails as shown. Secure, but do not over
tighten, each threaded connector with a flat head
screwdriver.
Made in Vietnam - r08 Page 2 of 6
2
1
A. Fit threaded connector of right side
frame into corresponding holes of head and
foot rails.
B. Fit each threaded connector through 1
bracket, 1 large flat washer, 1 large spring
washer and 1 hex nut. Secure assembly
using a hex wrench.
Repeat for left side rail.
B
threaded
connector
left and right
side rail
head rail
A
foot rail
left side rail
hex nut
large spring washer
bracket
large flat washer
threaded
connector
L
L
R
R
L
L
RR
NOTE: Make sure
label “THIS SIDE
DOWN” is visible
during assembly
T
H
I
S
S
I
D
E
D
O
W
N
right side rail
2.625”
5”
NOTE: The end of the
side rail with 2.625” of
space from the end
attached to the head rail
NOTE: The end of the side
rail with 5” of space from the
end attached to the foot rail
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

siesta BED
Made in Vietnam - r08 Page 3 of 6
3
right
short leg
4
With the assistance of another adult, turn
assembly and fit pre-assembled dowels of left
and right short legs into corresponding holes
of left and right side rails. Secure each
short leg with 1 large flat washer, 1 large
spring washer and 1 large bolt, using an
allen wrench. Do not over tighten the bolts.
left
short leg
NOTE: Do not over
tighten the bolts
Fit pre-assembled dowels of left and right
long legs into corresponding holes of left
and right side rails. Secure each long leg
with 1 large flat washer, 1 large spring
washer and 1 large bolt, using an allen
wrench.
right
long leg
left
long leg
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

siesta BED
Made in Vietnam - r08 Page 4 of 6
5
A. Attach 2 uprights to headboard rail by
turning each upright clockwise to secure.
B. Fit 2 pins into headboard rail as shown.
headboard
rail
6
upright
pin
A. With the assistance of another adult, fit
uprights and pins of headboard rail into
corresponding holes of assembled unit as
shown. Secure each upright with 1 large flat
washer, 1 large spring washer and 1
medium bolt, using an allen wrench.
B. Secure headboard rail to long legs with
1 small flat washer, 1 small spring washer
and 1 large screw per leg as shown, using a
phillips head screwdriver. Do not over
tighten the screws.
BA
B
A
B
A
NOTE: Do not over
tighten the screws
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

siesta BED
Made in Vietnam - r08 Page 5 of 6
7
Attach 3 center rail legs to center rail as
shown. Secure by turning each leg clock-
wise.
center rail
leg
8
Fit center rail assembly into brackets of
head and foot rails as shown. Secure
center rail with 2 small flat washers, 2
small spring washers and 2 small bolts,
using an allen wrench.
center rail
center rail
assembly
bracket
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

cleaning & care
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners.
siesta BED
Made in Vietnam - r08 Page 6 of 6
9
Attach 2 slat assemblies to left/right side
frames and center rail with 12 small
screws as shown. Make sure each slat is
securely attached.
Assembly is now complete.
slat
assembly
slat
assembly
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com