CB2 HEYDAY User manual

Made in China - r11 Page 1 of 4
heyday LOW DRESSER
hardware
components - box 1
tools required
Thank you for purchasing the Heyday Low Dresser.
This page lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components to this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
Missing hardware?
Please call 800.606.6387 for replacements.
(We recommend the use of hand tools instead of power tools)
2 - side panels
(1 left, 1 right)
12 - wood
dowels
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
1 - partition
(glides on both
sides)
1 - back
panel
1 - top
panel
1 - bottom
panel
4 - drawer
fronts
4 - left drawer
sides
4 - drawer
bottoms
4 - right drawer
sides
4 - drawer
backs
4 - legs
(2 left, 2 right)
1 - support
leg
6 - cam
screws
6 - cams 12 - leg
screws
32 - medium
screws
15 - large
screws
phillips head screwdriver
6 - cam
covers
16 - small
screws
components - box 2

A. Insert 2 cams and 4 wood dowels into left and
right side panel as shown. Make sure arrows on
each cam points toward nearest edge with holes.
B. Insert 2 cams and 4 wood dowels into
partition.
heyday LOW DRESSER
Made in China - r11 Page 2 of 4
1 2
A
left and right
side panels
NOTE: Make sure arrows
on each cam points toward
nearest edge with holes
3 4
partition
B
Insert 6 cam screws into top panel as shown.
Secure, but do not over tighten, screws with a
phillips head screwdriver.
top
panel
NOTE: Do not
over tighten
the cam screws
Attach back panel to assembled unit with 3 large
screws per side panel as shown. Secure, but do
not over tighten the screws with a screwdriver.
With assistance of another adult, fit dowels of
partition and left/right side panels into
corresponding holes of top panel as shown. Make
sure glides pull out away from the grooves on top
panel and cams are oriented as shown. Secure all
cams.
NOTE: Make sure glides
pull out away from grooves
of top panel and cams are
oriented as shown NOTE: Do not
over tighten the screws
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
right side
panel
left side
panel
top
panel
partition right side
panel
left side
panel
back
panel

heyday LOW DRESSER
Made in China - r11 Page 3 of 4
5
7 8
A. With the assistance of another adult, fit dowels
and back panel of assembled unit into corresponding
groove of bottom assembly as shown. At this point,
secure bottom assembly with 9 large screws as
shown, using a screwdriver.
B. At this point, cover all exposed cams with cam
covers.
B
6
A
A
B
NOTE: Do not
over tighten
the screws
A. Attach 4 left/right legs to bottom panel with 3
leg screws per leg as shown. Secure screws with
a screwdriver.
B. Attach support leg to bottom panel. Turn
support clockwise to secure.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Attach drawer left side to drawer front assembly
with 2 medium screws and secure using a
screwdriver as shown. Make sure the angled side
is towards the drawer front assembly, and
grooves on sides and drawer front are aligned.
bottom
assembly
bottom
panel
support
leg
left side
legs
A
B
right side
legs
Slide drawer bottom into grooves of drawer
assembly as shown.
drawer
bottom
drawer front
assembly
drawer
left side
NOTE: Make sure the angled
side is towards the drawer front
assembly, and grooves on sides
and drawer front are aligned.
SIDE VIEW
drawer
left side
drawer front

11
cleaning & care
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.
heyday LOW DRESSER
Made in China - r11 Page 4 of 4
9 10
Attach drawer right side to the drawer assembly
with 4 medium screws as shown.
Repeat steps 7-10 for remaining drawer
assemblies.
Attach drawer back with 2 medium screws as
shown.
A. Fully extend drawer glides from assembled unit.
B. Position and rest the drawer assembly on top of
tabs of drawer glides as shown. Secure each glide
to drawer with 2 small screws as shown, using a
screwdriver.
Repeat step 11 for remaining drawer assemblies.
Assembly is now complete.
A
B
B
drawer
assembly
Customer Service 800.606.6252 I Latest instructions available at www.cb2.com
drawer
back
drawer
right
side