CB2 chill User manual

Made in Vietnam - r09 Page 1 of 6
chill MEDIA CONSOLE
hardware
components
tools required
Thank you for purchasing the Chill Media Console.This
page lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components to this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
NOTE: 2 people are required to safely assemble this product.
Missing hardware?
Please call 800.606.6387
for replacements.
(We recommend the use of hand tools instead of power tools)
18 - cam
screws
1 - top
panel
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
1 - bottom
panel
1 - large
back panel
2 - top partitions
2 - drawer
backs
2 - side panels
(1 left, 1 right)
2 - drawer
bottoms
2 - drawer
fronts
(1 left, 1 right)
4 - drawer
sides
(2 left, 2 right)
30 - wood
dowels
18 - cams 9 - bolts
16 - screws
9 - spring
washers
phillips head screwdriver
9 - flat
washers
8 - cam
covers
1 - middle
panel
1 - small
back panel 1 - bottom partition
4 - small
screws
4 - large
screws
2 - wall
straps
4 - mounting
brackets
4 - plastic
anchors
mounting hardware

A. Insert 2 cam screws, 2 wood dowels and 4
cams into middle panel as shown. Secure, but do
not over tighten, cam screws with a phillips head
screwdriver. Make sure arrows on each cam point
toward nearest edge with holes.
B. Insert 4 cam screws, 6wood dowels and 2
cams into left and right side panels as shown.
chill MEDIA CONSOLE
Made in Vietnam - r09 Page 2 of 6
1
34
middle
panel
A
top panel
2
Fit dowels of top partitions into corresponding
holes of middle panel as shown. Secure middle
panel with 4 bolts, 4 spring washers, and 4 flat
washers, using a phillips head screwdriver. Do
not over tighten the bolts.
A. Insert 8 wood dowels and 8 cam screws into
top panel as shown.
B. Insert 4 cams into bottom panel as shown.
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
left and right
side panels
A. Insert 2 wood dowels and 2 cams into top
partitions as shown.
B. Insert 2 dowels and 2 cams into bottom
partition as shown.
top partition
bottom
partition
NOTE: Do not over
tighten the cam
screws
top partition
NOTE: Do not over
tighten the bolts
bottom
panel
B
A
B
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
middle panel
top partition

chill MEDIA CONSOLE
Made in Vietnam - r09 Page 3 of 6
5
78
Fit large back panel into corresponding groove of
assembled unit as shown.
6
A. Insert 2 wood dowels into bottom panel as
shown.
B. Fit dowels of bottom panel into corresponding
holes of small back panel as shown. Secure small
back panel with 3 bolts, 3 spring washers, and 3
flat washers, using a screwdriver.
AB
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
With the assistance of another adult, fit dowels of
bottom partition into corresponding holes of
bottom panel and large back panel into
corresponding groove of bottom panel as shown.
Secure bottom panel with 2 bolts, 2 spring
washers, and 2 flat washers, using a screwdriver.
bottom
panel
large back
panel
small back
panel
bottom
panel
Fit dowels of middle panel into corresponding
holes of bottom partition as shown. Secure
bottom partition by turning 2 cams clockwise
with a screwdriver, until each cam securely
engages each cam screw.
bottom
partition
middle panel
NOTE: Make sure glides
of bottom partition are
positioned as shown

A. With the assistance of another adult, carefully
position assembled unit upright. Fit dowels of top
panel into corresponding holes of assembled unit.
Secure all cams.
B. At this point, cover all exposed cams with cam
covers.
chill MEDIA CONSOLE
Made in Vietnam - r09 Page 4 of 6
9
11
10
top panel
12
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Attach drawer left side to drawer front with 2
screws as shown. Secure screws with a
screwdriver.
drawer
front
drawer
left side
NOTE: Do not over
tighten the screws
Slide drawer bottom into grooves of drawer
assembly as shown.
drawer
bottom
right side
panel
Fit dowels of left and right side panels into
corresponding holes of assembled unit. Secure all
cams.
left side
panel
A
B
bottom
panel

cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.
weight limitations
Holds up to a 35 inch conventional tv or 60 inch flat
screen.
chill MEDIA CONSOLE
Made in Vietnam - r09 Page 5 of 6
13
15
14
Attach drawer right side to drawer assembly with
4 screws as shown.
Repeat steaps 11-14 for remaining drawer
assembly.
drawer
right side
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Fit groove in drawer back onto drawer bottom
and dowels of drawer back into drawer side
panel. Attach drawer back to drawer assembly
with 2 screws as shown.
drawer
back
With assistance of another adult, insert glides of
drawer assemblies into corresponding glides of
case assembly. Keeping the drawer level, carefully
push the drawer until it is all the way in the case
and glides are securely engaged.
Assembly is now complete.
NOTE:
Make sure glides are
pulled out of the case, and
ball bearings are at the front of
the extended glides
NOTE: Make sure to
keep drawer level so
as not to damage glides
during assembly

chill MEDIA CONSOLE
Made in Vietnam - r09 Page 6 of 6
For added safety and stability, it is recommended that the wall mounting hardware be installed. For
safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall,
concrete, etc.). Mount to wood studs whenever possible.
A) Attach mounting bracket to top of unit using 2 small screws.
B) Determine the final location of unit. Mark position on the wall, approximately 2" below the
mounting bracket mounted to the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly
smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is
flush with the wall.
D) Attach the mounting bracket to the wall by inserting 2 large screws through the mounting
bracket and into the wall anchor in the wall.
E) Place the unit so the mounting bracket on the back edge is allowed with the wall bracket.
F) Lace one end of the wall strap through both brackets, and into the other end of the strap.
G) Pull the strap tightly until secure.
Repeat step A-G for remaining wall mounting assembly.
Wall mounting assembly is now complete.
NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware store.
wall mounting assembly
A
C
D
small
screw
mounting
bracket
plastic
anchor
large
screw
wall
strap
mounting
bracket
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com