Ccs Psb series User manual

PSB-1012V-WW/ PSB-1024V-WW

CCS Inc.

Power requirements

Output

Mass

Connector type

Model

POWER

LIGHT

100-240V

GND

15.5 100 15.5 5411 11

(8.5) 131 (15)

505

INTENSITY

AC100-240V 27VA

12V/10W

PSB-1012V-WW PSB-1024V-WW

440g

AC100-240V 27VA

24V/10W

440g

2P (1:+ , 2:_) x1

3P (1:+ , 2:NC , 3:_) x1

Third Angle Projection Units: mm

The PSB Series is an analog power supply series providing stepless 

intensity control through variable voltage control.

It is ideal for continuous use with cameras having a shutter speed of 

1/4000 or faster. Worldwise type also available.

* Models with lock of dimming control knob are available as option.

Models: PSB-512VL/PSB-524VL/PSB-1012VBL/PSB-1024VBL/

PSB-3012VBL/PSB-3024VBL

PSB Series

CCS Standard Analog Power Supplies

Analog Power Supplies

Dimensions (Unit: mm)

Model

PSB-512V

PSB-524V

PSB-1012VB

PSB-1024VB

PSB-3012VB

PSB-3024VB

PSB-1012V-WW

PSB-1024V-WW

Power requirements

AC100 ~ 120V 15VA

AC100 ~ 120V 27VA

AC100 ~ 120V 78VA

AC100 ~ 240V 27VA

Output

12V/5W

24V/5W

12V/10W

24V/10W

12V/30W

24V/30W

12V/10W

24V/10W

Circuit

Connector

SMP-02VX1

SMP-03VX1

SMP-02VX1

SMP-03VX1

SMP-02VX2

SMP-03VX2

SMP-02VX1

SMP-03VX1

Specifications

Models with CE Marking

PSB-1012V-WW / PSB-1024V-WW

PSB-1012VB / 1024VB

PSB-3012VB / 3024VB

PSB-512V / 524V

PSB-1012V-WW / 1024V-WW

AC cable

(2.3m)

11 80 22 4012.5 12.5

113 (17)

425

GND

120

148 (17)

555

GND

POWER

LIGHT

100-240V

GND

15.5 100 15.5 5411 11

(8.5) 131 (15)

505

INTENSITY

109314

117 (17)

5411 11

455

GND

PSB-512V/PSB-524V

PSB-3012VB/PSB-3024VB

PSB-1012VB/PSB-1024VB

AC cable

(2.3m)

AC cable

(2.3m)

RoHS Directive Compatible

   

             

             Operation Manualfor the PSB series 

Power Supply Units for LED Lighting



                            



1.Articles for safety- Be sure toread before using-

Thank you for purchasing Power Supply Units for LED Lighting. Be sure to read this operation manual carefully

and use as described. This manual should be kept with the product and referred to whenever needed. Obey the

following articles with    Warning,Caution in this manual to prevent accidents such as bodily

injuries and electric shocks.

＜Safety precautions＞

                    



Warning

(1)

Do not open the cover of theproduct

Electric shock may occur asthe voltage of some internal parts is high.

(2)

Connect the power plug directly to the outlet.

Fire and electric shock may occur when connected to an extended table tap or a multiple

outlet extension plug. Install and remove the product after disconnecting the power plugs

of the mainbody and peripheral devices fromoutlets.

(3)

Do not touch the power plug with wet hands.

Otherwise,electric shock mayoccur.

(4)

Ground properly.

Otherwise,electric shock mayoccur incaseoftouching the equipmentand the power unit at

thesame time.

(5)

In the following cases, turn off the power, pull the power plug from the outlet and

stop using instantly.

・Smokerising fromtheunit.

・Theoutside of the unitistoo hot.

・There are strange smells or strangesounds.  

(6)

Do not look at the light of high lumen directly.

LED Lighting doesn’t have a quality of gathering light like a semiconductor laser, however,

do not look at the light of high lumen directly or do not view the electric flashing light directly

for a long time. Eye damage may occur.



DeclarationofConformityfor

PSB-xxxx-WWseriespowersupply



StatementofConformity

Basedontestresultsusingappropriatestandards,

theproductisinconformitywith

ElectromagneticCompatibilityDirective89/336/EEC



LowVoltageDirective73/23/EEC

SampletestsStandardsused:

Safety:EN61010-1,EMC:EN50081-2,EN50082-2



ThisConformityisindicatedbythesymbol.

                         Caution

(1)

There is a risk of electric shock when touching the metal housing of this power supply and another unit at

thesame time. To avoidelectricshock, ground the FG terminal with 0.5〜1.25sq (AWG20〜AWG16).

If the housing of the device touched at the same time has not been grounded and has potential for

electricshock, there isa way to connectthe FG terminalsto avoida shock.

(2)

Do not extend a cable for the light input to more than 5m. Otherwise, the voltage is lowered because of

voltage drop occurred by a DC resistance of the cable. The quantity of light decreases since the voltage

suppliedto the lightdoesn’treachtherate voltage in spite of 100%light-up.

(3)

In case of that the power supply unit is mounted to another system rack or frame case, remove four legs

from bottom of the unit. Mount the unit with M3 screws and make sure the insertion of screw less than

5mmtoavoidshort circuit.

(4)

To conform to EMC Directive, attach a ferrite core ESD-SR-25 [TOKIN] or equivalent to the power cord

for removing the high frequency noise.

(5)

Switch off the power when connecting and disconnectingcables.

Otherwise,fire andelectric shock may occur.

(6)

Disconnect the power cableand the external cable when you move the unit.

Damaged cables may causefire andelectric shock.

(7)

Do notuse the unit in a closed system, as thelight becomeshot.

Cool down with fans,etc.in case ofusingin a closed space.

(8)

In the followingcases, turn off the power,pull the power plug fromthe outlet and stop using instantly.

・Smokerising fromtheunit.

・Theoutside of the unitistoo hot.

・There are strange smells or strangesounds.

Please contact the local sales office of CCSasitis dangerous for youtorepairit.

(9)

In caseof dropping and damagingtheunit, please contact the local sales office of CCSafter turning off

thepower andpulling the power plug from the outlet.

Fire and electric shock may occur if you continue to use the unit.

(10)

Install the unit in the followingsite.

・Temperature: 0 –40℃. Humidity:20 –85%RH. (No condensation.)

・At a flat site without vibration.

・At a site with good ventilation, not exposed to dust.

・Notat the site where the temperature immediately changes.

・Notnear a faucet, a water heater, ahumidifier,an airconditioner ora heater.

(Not at the site where temperature andhumidity is too high, nor too low.)

・Notnear things containing water.

(11)

Obey the following articlesfor the power source.

・Take the power as a dedicated powersource from the space with steady voltage.

Do not operate the unit from the same power source as an air conditioner, a copy machine, etc. as this

causesincorrectoperation.

・Pull off thepower plug fromthe outlet when notusing for anextended time.

・Do not put the power cable nearheating machinesnor damage it.

・Do not touchtheproduct and thepower plug during theelectrical storm.

(12)

Bundlingthe cameracableand the power cable together may affect the screen badly.

(13)

When using colorimage processing with whiteLED,

・In continuous light-up, the quantity of light and color varyinresponse to the temperature.

・Regulate the whitebalance of the camera again about 1 hour after switching on thepower.

・In intermittentlight-up,it is possibleto use theunitassoon as thepower is on.

(14)

Use theLED light with controlledheat-generation.

・The lifetime of the LED light is shorter when used at high temperature. In case of continuous use

keeping the dimming quantityof light around 50%shows stableperformance for a longer time.

・Turning on the light only when taking inthe image, the Intermittent light-up, makesit possible to usethe

unit under the stable condition with less heat generation.

(15)

In using the unit under the following conditions, consider the rates, the functions, and safety like a

fail-safe.Also, contact the sales local office of CCS.

・In case of using it under conditionsand environments not written in this manual.

・In case of using it for atomic energy, a railway, an airplane, a car, a burning machine, a medical



instrument, an entertainment facility or a safety device.

・In the case whenseriousinfluenceson life and property are predicted and special safety isrequired.

2. Illuminator output connector                                     

   Pin number PSB-XX12 PSB-XX24

1 +12V +24V

2 GND non-connection

3 GND

  Connector SMP-02V-BC(JST) SMP-03V-BC(JST)

3. How to operate                                               

(1) Connection

    Turn thepower supplyswitch off.

Connect the receptacle of the LED illuminator tothe output plug connector ontheback part of

thepower supply. Ground the FG terminal with 0.5-1.25sq(AWG20-16) wire. 〔caution1〕

Connect theplug of theAC cord to anAC100V outlet.

(2) Power supply operation

Turn the power supplyswitch on.

(3) Intensity control

PSB series power supply controlsintensity variably.

Intensity voltage rangeis 8.3〜12V for the12Villuminator, 5W model is 15〜24V for the 24V

Illuminator and the 10, 30W model is 12〜24V. The LED intensifies by turning the dial to the right and

dims by turning it left. Some illuminators may deactivate if the dial is turned completely left. The dimming

range of some lightings may be limited. Although we select and use LEDs that have the equivalent

features, the slight unevenness of the forward voltage before turning off makes some LEDs turn off earlier

or flash on. Thisis not due tothe degradation of LEDlightings.

4. Factory Options                                              



（１） Latch with the intensity control VR lock noted with aL

Control theintensity with a minus driver.

To lock, firmthe VR shaft while screwing the M3 push screw with a hexagon

wrench.

          intensity control VR            

                                          intensity control hole

intensity control hole                          φ

１６

                                       

                                           screwhole with hexagon

                                 

１３

socketheaded bolt

 （２） External ON/OFF function noted with an EX

  Possible to control ON/OFF from external PLC and computer.

Use the illuminatoronly when necessary to avoidoverheating, consequently

affecting it'slife span.

Power supplyconnector : Microphone jack

Suitableplug : φ3.5mm US model plug

  Signal（＋） Case

                       

 GND（−）

          

＊Control ON/OFF by connecting phone plug to the power supply's external control jack.

＊The LEDilluminator will remainon when the plug andGND(−)short-circuit.

＊To eliminateexternal noize, attach a 0.1μF ceramic condenser between Signal and GND.

＊Recommended circuit

                Open Collector   Relay

（１0 ｍＡ）                      （１0 ｍＡ）

           signal signal

                      ７４ＬＳ０６

ＧＮＤ        ＵＬＮ２００３ etc. ＧＮＤ

In case of controlling ON/OFFinhigh speed conditions, drive it with an opencollectoror

an driver IC.

＊Aphone plug is not included.

(There is an optional 3m cable with a plug.)

5.Specifications                                                

ModelPSB-

512V

PSB-

524V

PSB-

1012VB

PSB-

1024VB

Input*1) AC100-120V

15VAmax.      AC100-120V

15VAmax.      

AC100-120V

27VAmax.      

AC100-120V

27VAmax.

      

Output DC12V 5W DC24V 5W DC12V10W DC24V10W

Connector SMConnector2P SM Connector 3P SMConnector 2P SM Connector 3P

Dimension*2) W65xD113xH42 W65xD113xH42 W76xD117xH45 W76xD117xH45



ModelPSB-3012VB PSB-3024VB PSB-3012V-WW PSB-3024V-WW

Input*1) AC100-120V

78VAmax.      

AC100-120V

78VAmax.      

AC100-240V

78VAmax.      

AC100-240V

78VAmax.

      

Output DC12V30W DC24V30W DC12V30W DC24V30W

Connector SMConnector2P SMConnector3P SMConnector 2P SM Connector3P

Dimension*2) W86xD148xH55 W86xD148xH55 W86xD159xH55 W86xD159xH55



Model PSB-1012V-WW PSB-1024V-WW

Input *1) AC100-240V

27VAmax.      

AC100-240V

27VAmax.      

Output DC12V10W DC24V10W

Connector SMConnector2P SMConnector3P

Dimension*2) W76xD130xH50 W76xD130xH50

 *1) The operating voltage isfrom –15%to+10% ofthe input voltage.(50/60Hz)

*2) Projected itemssuch asthe switch, latch and standarenot included.

PowerCord(2.3m)



FG Terminal

Back Panel

Front Panel

Intensity Control

117

Output

Connector

Power Cord(2.3m)

Power Switch

Screw

nsertion

Less than 5mm

Output Connector

Intensity Control

Power Cord(2.3m)

113

Screw insertion less than5mm

Back Panel

Front Panel

FG Terminal

6.Appearance



 （１） ＰＳＢ−５１２Ｖ／ＰＳＢ−５２４Ｖ



 （２） ＰＳＢ−１０１２ＶＢ／ＰＳＢ−１０２４ＶＢ

Power Cord(2.3m)

(2.3m)

Power Switch

Back Panel

Front Panel

FG Terminal

148

120

Screwinsertion

less than 5mm

Power Switch

Intensity Control

Back Panel

Front Panel

130

Output

Connector

100

rew insertion

lessthan 5mm

Output

connector

Intensity Control

（３） ＰＳＢ−３０１２ＶＢ／ＰＳＢ−３０２４ＶＢ



（４）  ＰＳＢ−１０１２Ｖ−ＷＷ／ＰＳＢ−１０２４Ｖ−ＷＷ



159

（５） ＰＳＢ−３０１２Ｖ−ＷＷ／ＰＳＢ−３０２４Ｖ−ＷＷ



AdomesticACpower (100-120V) supply cord isincludedinthe units ofWW-series. In operating atAC 200V,

make sureof using a power supplycord for 200V



BackPanel

FrontPanel

19.5

120

IntensityControl

AC Inlet

4-M3



Screwinsertionlessthan5mm

Front Panel

Power Switch

Back

Output

Connector

■ Exemption

Wearenotobliged to have anyresponsibility nor compensation for troublesand damages which occur

both directly andindirectlyfrom using the power unit and theLED light.

                                                                               