
HOW TO USE
- Use the attached USB cable to charge the digital prod-
uct. Connect USB plug to the “OUT” port of the Power-
bank5200 and plug the digital device with the Included tips.
You can also use the USB cable provided together with the
digital device (in this case you won’t need the tip).
Press “ON” button once , it will start to charge and the green
LED will indicate the charging process.
- Once charging process will be ended, or if the charge would
fail, the LED will stop flashing and powerbank will turn off auto-
matically after 30 seconds.
- If during charging process, the LED flashes quickly, it will mean
low power, and it will need to be charged.
- FLASHLIGHT FUNCTION (optional, not included in package)
Press “ON “ button twice to turn ON or OFF the torch within 1
second.
NOTE: If the current would be oversized charging the digital prod-
uct, Powerbank5200 will turn to protected mode automatically. To
remove protected mode just charge Powerbank5200.
EN EN
HOW TO CHARGE THE POWERBANK5200
The“IN”port is the charging port of the power bank. The red LED
will light on when charge the power bank,and the red LED will
light off after full charging.
UNIT VIEW DESCRIPTION
1. ON/OFF button
2. DC5V input port
3. USB output port