Cenocco CC-9080 User manual

WHOLE NEW EXPERIENCE
360 Degrees All Directional Foot Massaging
CENOCCO CC-9080
The Next Generation Foot Massager
For Blessing, For Perfection, For Health
Dredging Meridians, Promoting QI and Circulating Blood Clearing Toxins,
Caring Skin and Relieving Fatigue

Thank you for purchasing our foot massager!
Please read the user manual carefully before using and pay special attention
to safety instructions for proper operation and use of the product
This provides users with safe and efficient approaches of operation, so please
properly retain it for future reference and inquiries after reading.
Table of Contents:
•Safety Instructions
•Warranty
•Product Components
•Feature and Use Diagram
•Settings
•Specifications
•Troubleshooting
•Maintenance
Maintenance:
A.) Storage
•The product should be put into the color box and stored under safe, dry, well-
ventilated, and cool condition when it is not use.
•Do not twist switching the power button and the cord.
•Do not hang the product with the cord.
•Avoids scratching by sharp objects on the surface of the product.
•Do not put the product in direct sunlight or under condition of high temperature.
B.) Cleaning
•Make sure the power button is off and unplug the power cord before cleaning.
•Use a dry cloth to clean the surface of the product.
•Do not hang the product with the cord
Note: Do not use corrosive detergents, such as benzene or thinner, to clean the product.
C.) Maintenance
•Keep the product clean and away from high humidity conditions.
•Please use a dust cover (not included in the box), to cover the product to prevent
dust from coming into it if it is not used for a long period of time.

Troubleshooting:
Please refer to the following several types and possible solutions if problems
occur during usage of this product. The product may be returned to the service
center or undergone inspection and repair by authorized technicians.
Problems
Possible Causes
Remedies
Not working
Unplugged
Connect the product to
power or check
whether the product is
well-connected
Power button not
pushed
Push the power button
Suddenly stops running
Power disconnection
Check whether the
product is well-
connected
Operation duration
over 15 minutes
Restart the product
Product overrun and
overheat
Too much operating
Restart the product
after cooling
pressure that the
massage balls stop
rotation
Restart the product
Safety Instructions:
A.) Important Safety Instructions
•Be sure to read the user manual in a detailed way prior to use to ensure safety
and proper use of the product
•Make sure to use the product by following the instructions in tis manual
•After using or before cleaning the product, please disconnect the power.
•Always cautiously use the heating function to avoid serious burns.
•Do not apply the product to too insensitive and over sensitive skins or to body
parts of poor blood circulations.
•Never allow children or those of physical and mental disorders to use the heating
function or improper operation may be dangerous.
•To prevent fire, electric shock or injuries caused by overheating, never use it
under a pillow or a blanket.
•Do not cover it during using to avoid malfunction or damage resulting from motor
overheating.
•Children, those of physical and mental disorder and the disabled should be under
guidance when using the product
•Please stop using immediately if you feel uncomfortable.
•When the power cords or plugs are damaged or dropped into water, do not use
this product. Please contact the service center for inspection and repair,
•Do not use spare parts that are not recommended by the manufacturers.
•Do not insert or drop objects into any opening of the products.
•Please close all operational controls before disconnecting the product to the
power if you want to cut off the power.
•This product cannot be used for self-diagnosis or treatment and please visit
professional medical care if in need of diagnosis or treatment.
B.) Use Environment
•Do not use this product at room temperature over 40°C
•Do not use the product outdoors.
•Do not use the product next to an electric heater or stoves or in direct sunlight.

Safety Instructions:
C.) People Not Recommended Using the Product
•Please consult your doctor before using if you have the following situations,
•Receiving medical treatment or experiencing physical discomfort
•Suffering from hypertension, heart disease, cerebral atherosclerosis, and cerebral
thrombosis
•Suffering from cancer
•Pregnant or in a period
•Suffering from osteoporosis
•Using a pacemaker or implantable medical devices
•Suffering from acute diseases
•Minors
D.) Buttons
•Do not operate the buttons with wet hands.
•Keep the buttons from water or other liquid.
•Do not fall asleep when using the product.
•Do not use this product when you are drunk or feeling uncomfortable.
•Do not directly contact the massager pad with your hands, feet joints, knees,
chest, and abdomen.
•Do not use this product over thirty minutes in a row.
•Do not use if the product's one hour before and after eating to avoid adverse
effects.
•Do not enable the heating function when the product is being used in a low room
temperature, it is recommended that you should gradually adjust the
temperature to a normal range before enabling heating.
•If the product is used immediately after being transferred from a cold
environment to a warm environment, the accumulation of water vapor inside the
product may affect the normal operation of the productor even cause mechanical
failure. You are suggested to put the products in a normal room temperature for
1 hour before starting to use it after the transfer
Specifications:
Name
Airbag Heating Foot Massager
Rated Voltage
220V
Rated Power
50W
Standards
GB 4706.1-2005
Standards
GB 4706.1-2008
Timer
15 minutes

Displays:
Display
Timer Button: To set massage duration
on timer.
Mode Button: To switch between
massage modes. This product provides
two modes of massage with red and
blue light indicators for each.
Intensity Button: To control the
message intensity, where the red light
indicates a high intensity and blue light
indicates a low intensity
Heating Button: When the product is
turned on, push this button to control
the heating independently with a red-
light indicator (The heating is on is
default)
Power Button: To turn on/off the
product
A.) Before use
•Check the product for any damage.
•Ensure a stable and comfortable use environment.
B.) Use
•Untie the power cord and connect to power of 220V/50Hz
Default Settings
•Press the Power Button Once, and the heating function is ON in a red indicator:
The Intensity is low in a blue indicator, and the product is on Mode 1 in a blue
indicator.
•Press the Power Button ONCE, then press the Heating Button ONCE, and the
heating function will be OFF as the red indicator goes off.
•When the product is in operation, press the Intensity Button to switch between
the two types of intensity. Blue light indicates low Intensity and red light indicates
high Intensity.
•When the products is in operations, press the MODE Button to switch between
two modes. Blue light indicates Mode 1 and red light indicates Mode 2.
Warranty:
1. Warranty is not transferable.
2. Users can be enjoying free warranty from the date of purchase during the
warranty period) The surface is not covered under warranty.)
3. Product warranty is valid for one year.
4. Please present the original proof of purchase and warranty card when applying
for warranty service.
5. The purchasing date shall be based on the effective receipt or invoice issued by
the retailers.
6. This warranty shall not apply to leasing, trade, commence, institutions and other
non-buyer users.
7. The following situations are not covered by the warranty and only paid service
are provided (charging labor costs and materials costs)
•Destruction caused by human factors, including the non-normal using
environment, usage and storage that are not complaint to the instructions,
and damage caused by improper use. etc.
•Disassemble, repair and modification of the products without our
authorization.
•Damage caused by user poor transportation after purchase.
•Damage resulting from any other force majeure (such as flood, fire, lighting,
and earthquakes).
MODE
Intensity
HEATING

Product Components:
1. Central Surface: Four Independent Buttons - Controlling the product's settings
and functions
2. Central Massager Pad: Scratching - Acupressure on the arches with heating.
3. Front Massager Pad: Roller Kneading - Acupressure on the front soles.
4. Rear Massager Pad: Push Kneading - Acupressure on the heels
5. Interior airbag - Air pressure on the insteps
6. Removable and washable fabric cover - cleaning
7. Bottom: Cord Wrap - keeps things tidy
Features and Use Diagram:
Product Features:
•Egg-shaded design, fashionable and beautiful, lightweight, and portable:
•A combination of a variety of functions including scratching, roller kneading
and push kneading acupressure, air pressure and heating.
•Massager Pad that provides all-around massages and in-deep acupressure to
clear the body’s meridians and foot reactions zones.
•Removable and washable cover, allowing you to keep clean at any moment.
•Cord Wrap, bringing convenience to life.
Use Diagram:

Table of contents
Other Cenocco Massager manuals