CentoLight Moodliner 1430WP User manual

Carefully read this manual and properly take care of it
Leggete questo manuale e conservatelo per future consultazioni
User Manual
Manuale Utente
14x30W RGBW 4in1 Waterproof Led Bar Washer
Barra Cambia-colori da Esterno con 14x30W Led RGBW 4in1
ENG
ITA
Moodliner 1430WPMoodliner 1430WP

22
Dear customer,
First of all thanks for purchasing a CENTOLIGHT® product. Our mission is to satisfy
all possible needs of light designers and professionals of entertainment lighting, by
offering a wide range of products based on the latest technologies.
We hope you will be satisfied with this fixture and, if you want to collaborate, we
are looking for a feedback from you about product operation and possible im-
provements to be introduced in the next future. Go to our website www.centolight.
com and send an e-mail with your opinion; this will help us to build equipment ever
closer to professional’s real requirements.
The CENTOLIGHT Team
Gentile Cliente,
Grazie per aver scelto un prodotto CENTOLIGHT®. La nostra missione è quella di
soddisfare ogni possibile richiesta da parte di light designers e professionisti dell’il-
luminotecnica per l’intrattenimento, offrendo una vasta gamma di apparecchiature
basate su tecnologie di ultima generazione.
Speriamo di aver soddisfatto le vostre aspettative e, se voleste collaborare, sarem-
mo lieti di ricevere un vostro feedback sulla qualità del prodotto al fine di migliorare
costantemente la nostra produzione. Visitate il nostro sito www.centolight.com ed
inviateci una mail con la vostra opinione; questo ci aiuterà a sviluppare nuovi pro-
dotti quanto più vicini alle vostre esigenze.
Il Team CENTOLIGHT

33
Eng
Table of ConTenTs
1 - Before you Begin 4
1.1. What is included- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
1.2. Unpacking Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
1.3. Accessories - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
1.4. Disclaimer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
2 - Safety Instructions 5
2.1. Symbols Meaning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
3 - Mounting and Rigging 5
3.1. Rigging - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
3.2. Heat - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
3.3. Servicing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
4 - Introduction 7
4.1. Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
4.2. Product Dimensions- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
5 - Product Setup 8
5.1. Rear Panel Description- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
5.2. About Power Connection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9
5.3. About Dmx Connection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
5.4. DMX Terminator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
5.5. 3-Pin vs 5-Pin DMX cables - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
6 - Menu Operation 11
6.1. Setting the DMX Address - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
7 - DMX Channel Assignments and Values 13
7.1. 9-ch DMX512 Channel Chart- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
7.2. 23-ch DMX512 Channel Chart - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16
7.3. 56-ch DMX512 Channel Chart - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19
7.4. 65-ch DMX512 Channel Chart - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19
8 - Lux Chart 22
9 - Troubleshooting 24
10 - Specication 25
11 - Warranty And Service 26
12 - Warning 26

44
MOODLINER 1430WP User Manual
Eng
1 - before you begin
Thank you for purchasing MOODLINER 1430WP. Enjoy your new equipment and
make sure to read this manual carefully before operation! This user manual is made
to provide both an overview of controls, as well as information on how to use them.
1.1. What is included
Package include:
y1x CENTOLIGHT MOODLINER 1430WP Led Bar
y1x 1.5m (59in ca.) Powercon to Europlug power cable
y1x Powercon Connector (Grey)
y1X 1.5m (59in ca.) DMX Cable 3-pin XLR-M to 3-pin XLR-F
yThis User Manual
ATTENTION: Packaging bag is not a toy! Keep out of reach of children!!! Keep in
a safe place the original packaging material for future use.
1.2. Unpacking Instructions
Carefully unpack the product immediately and check the content to make sure all
the parts are in the package and are in good condition. If the box or the contents
(the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier or dealer/seller immediately. In addition, keep
the box and contents for inspection. If the fixture must be returned to the manufac-
turer, it is important that it is returned in the original manufacturer box and packing.
Please do not take any action without first contacting your dealer or getting in
touch with our after-sales support service (visit www.centolight.com for details).
1.3. Accessories
CENTOLIGHT can supply a wide range of quality accessories that you can use with
your MOODLINER Series equipment, like Cables, Splitters, DMX controllers, and a
wide range of other fixtures. Ask your CENTOLIGHT dealer or check out our website
www.centolight.com. All products in our catalogue has been long tested with this
device, so we recommend you to use Genuine CENTOLIGHT Accessories and Parts.
1.4. Disclaimer
The information and specifications contained in this Manual are subject to change
without notice. CENTOLIGHT assumes no responsibility or liability for any errors or
omissions and reserves the right to revise or to create this manual at any time.
Copyright© 2021 CENTOLIGHT. All rights reserved.

55
MOODLINER 1430WP User Manual
Eng
2 - safeTy insTruCTions
yRead these instructions
yKeep these instructions
yHeed all warning
yFollow all instructions
2.1. Symbols Meaning
The symbol is used to indicate that some hazardous live termi-
nals are involved within this apparatus, even under the normal
operating conditions, which may be sufficient to constitute the
risk of electric shock or death.
The symbol is used to describe important installation or config-
uration problems. Not following advice and information on how
to avoid such problems may lead to product malfunction.
This symbol indicates a protective grounding terminal.
WARNING: Describes precautions that should be observed to prevent the
danger of injury or death to the operator.
To protect the environment, please try to recycle packing materi-
al and exhausted consumables as much as possible.
Don’t throw this product away just as general trash, please deal
with the product follow the abandon electronic product regula-
tion in your country.
3 - MounTing and rigging
Pay attention to safety! Please respectively consider the EN 60598-2-17 and the
national standard during the installation. Only authorized technicians can carry
out the installation.
3.1. Rigging
yThe installation of the fixture has to be built and constructed in a way that it
can hold 10 times the weight for 1 hour without any harming demolition. The
installation must always be secured with a secondary safety attachment, e.g. an

66
MOODLINER 1430WP User Manual
Eng
appropriate catch net. This secondary safety attachment must be constructed in
a way that no part of the installation can fall down if the main attachment fails.
yWhen rigging, de-rigging or servicing the fixture staying in the area below the
installation place, on bridges, under high working places and other endangered
areas is forbidden. The operator has to make sure that the safety measure and
the machine’s technical installation is approved by an expert before taking into
operation for the first time and after changes before taking into operation an-
ther time. He has also to make sure that an expert approves safety measure and
the machine’s technical installation once a years.
IMPORTANT: Overhead rigging requires extensive experience, including (but not
limited to) calculating working load limits, installation material being used, and
periodic safety inspection of all installation material and the projector. If you
lack these qualications, do not attempt the installation yourself, but instead
use a professional structural rigger. Improper installation can result in bodily
injury or property loss.
yIf the fixture shall be lowered from the ceiling or high joists, professional trussing
systems have to be used. The fixture must never be fixed swinging freely in the
room.
CAUTION: Use appropriate clamps to rig the xture on the truss. Make sure that
the device is xed properly! Ensure that the structure (truss) to which you are
attaching the xtures is secure.
3.2. Heat
yDo not use in a confined space. Always install the product in a location with
adequate ventilation, at least 20in (50 cm) from adjacent surfaces. Be sure that
no ventilation slots on the product’s housing are blocked.
yThe apparatus should be located away from heat sources such as radiators,
stoves or other appliances that produce heat.
Do not use it when maximum ambient temperature is higher than 50°C. Work
temperature ranges from -30÷55 °C (-22÷171 °F).
3.3. Servicing
yDo not implement any servicing other than those means described in the man-
ual. Refer all servicing to qualified service personnel only. The internal compo-
nents of the equipment must be purchased from the manufacturer. Only use

77
MOODLINER 1430WP User Manual
Eng
accessories/attachments or parts recommended by the manufacturer.
4 - inTroduCTion
Centolight MOODLINER 1420WP is an Outdoor Wash Led Bar with a 25° beam an-
gle. The light source consists of 14pcs of 30W 4in1 Led with RGBW color mixing. The
DMX control (with RDM) allows you to control every single color of each LED inde-
pendently, allowing extremely rich polychromatic effects. The MOODLINER 1430WP
is designed for outdoor architectural applications or in all those situations where
color wash effect as well as totally silent operation are required (theaters, houses of
worship, museums, auditoriums, etc.).
The fixture structure is very stout and completely waterproof. The housing is made
of die-cast aluminum and steel parts, with high-quality rubber gaskets for maximum
isolation and resistance to time. PowerCon In/Out Power connections and DMX In/
Out connections with XLR are totally waterproof.
4.1. Features
yWaterproof Washer Bar with 25° Beam Angle
y14x30W RGBW 4in1 LED with over 50,000h lifetime
yLuminous Flux: (RGBW) 3082lux/3m, 794lux/7m
yCRI: Ra≥85
yFlicker Free Operation
ySmooth 16-bit Dimmer
ySilent Operation
yIP65 Protection Degree
yWaterproof DMX and Power connections

88
MOODLINER 1430WP User Manual
Eng
4.2.Product Dimensions
MOODLINER 1430WP Importedby:
FRENEXPORTSPA
www.frenexport.com
1012mm (39.84”)
680mm (26.77”)
97mm
(3.82”)
139mm
(5.47”)
183,1mm (7.20”)
110,7mm
(4.36”) 138,5mm
(5.45”)
5 - ProduCT seTuP
5.1. Rear Panel Description
DOWN
ENTER
UP
MENU
1
2
MOODLINER 1430WP Importedby:
FRENEXPORTSPA
www.frenexport.com
3
5
4
6
The operation panel includes Connectors, security eye-bolt, 4-digit LED display and
control buttons.

99
MOODLINER 1430WP User Manual
Eng
1) LED Display
It shows the operating mode and all system information. Read “6 - Menu Operation”
on page 11 for details on all menus.
2) Control Buttons
MENU Button - Short-press it to switch the setting pages.
UP Button - It scrolls up individual items in the selection menu and sub-menus for
system settings (DMX address, Operation Mode, etc.), and increases values/settings
of parameters.
DOWN Button - It scrolls down individual items in the selection menu and sub-
menus for system settings (DMX address, Operation Mode, etc.), and increases
values/settings of parameters.
ENTER Button - Press ENTER to access menu levels and confirm parameter value
changes.
3) Power Input Socket
Plug the power-cord included with MOODLINER 1430WP into an AC socket properly
configured for this fixture. Please read “5.2. About Power Connection” on page 9
for details.
4) Power Output Socket
This fixture is also equipped with an output power connector to be used as power
mains source in case of cascade connection up to a maximum of 5 fixtures.
5) DMX Input Socket
DMX Input is a 3-pin male XLR socket for connection to a DMX control device.
Please read “5.3. About Dmx Connection” on page 10 for details on how to man-
age DMX connections.
6) DMX Output Socket
DMX output is a3-pin female socket for sending the DMX control signal to other
units. Please read “5.3. About Dmx Connection” on page 10 for details on how to
manage DMX connections.
5.2. About Power Connection
yAlways make sure that the voltage of the outlet you are connecting the product
to is within the range stated in paragraph “10 - Specification” on page 25 or
rear panel of the product (AC110V-240V 50/60Hz).
yMake sure the power cord is not crimped or damaged. Never connect this prod-

1010
MOODLINER 1430WP User Manual
Eng
uct to a dimmer pack or rheostat.
yNever disconnect the product from power cord by pulling or tugging on the cord.
yTo avoid electric shock, all fixtures must be connected to circuits with a suitable
ground and circuit breaker.
yWire correspondence is as follows:
Cable (EU) Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
Earth must be connected! Always pay attention to safety! Before taking into
operation for the rst time, the installation has to be approved by an expert.
5.3. About Dmx Connection
When use a DMX controller, please make sure that there is no interference
sources (e.g. intercom, high frequency radio waves and radiation source).
DMX machines are designed to receive data through a serial Daisy Chain. A Daisy
Chain connection is where the DATA OUT of one fixture connects to the DATA IN of
the next fixture. The order in which the machines are connected is not important
and has no effect on how a controller communicates to each of them. Use an order
that provides for the easiest and most direct cabling.
3-Pin XLR
Pin 1: GND
Pin 2: DMX -
Pin 3: DMX +
OUTPUTINPUT
DMX use of 3-Pin XLR Connectors
DMX Termonator
Unit 1 Unit 2 Last Unit
DMX 512
Connect machines using shielded 2-conductor twisted pair cable with 3-pin XLR
male to female connectors. The shield connection is pin 1, while pin 2 is Data Nega-
tive (S-), and pin 3 is Data positive (S+).
CAUTION: Wires must not come into contact with each other; otherwise the x-
tures will not work at all, or will not work properly.

1111
MOODLINER 1430WP User Manual
Eng
5.4.DMX Terminator
120ohm, 1/4W
Resistor
DMX Terminator
DMX is a resilient communication protocol, however errors still
occasionally occur. In order to prevent electrical noise from dis-
turbing and corrupting the DMX control signals, a good habit is to
connect DMX output of last fixture in the chain to a DMX termina-
tor, especially over long signal cable runs.
The DMX terminator is simply an XLR connector with a 120Ω
(ohm), 1/4 Watt resistor connected across Signal (-) and Signal (+),
respectively, pins 2 and 3, which is then plugged into the output
socket on last projector in the chain. The connections are illustrat-
ed below.
Complimentary signal cable can transmit signals to 20 unit xtures at most.
Signal amplier is a must to connect more xtures.
5.5. 3-Pin vs 5-Pin DMX cables
DMX connection protocols used by controllers and fixtures manufacturers are not
standardized around the world. However, two are the most common standards:
5-Pin XLR and 3-Pin XLR system. If you wish to connect this fixture to a 5-Pin XLR in-
put fixture, you need to use an adapter-cable or make it by yourself. Below you can
see the wiring correspondence between 3-Pin and 5-Pin plug and socket standards
5-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
6 - Menu oPeraTion
By pressing MENU button, the display will cycle through 14 menus. Press ENTER but-
ton to enter the corresponding menu, press UP or DOWN to modify current parame-
ter value. Then, press ENTER button again to save current value.
Menu N. Menu Name Description
1A001 – A512 DMX-512 address setting It ranges from 1 to 512. Press UP and
DOWN keys to adjust address; press ENTER to confirm.

1212
MOODLINER 1430WP User Manual
Eng
209CH – 23CH
56CH – 65CH
Channel Mode selection. You can choose among 09ch, 23ch, 56ch
and 65ch modes. Please check “7 - DMX Channel Assignments and
Values” on page 13 for details on each function. Press UP and
DOWN keys to choose the desired mode; press ENTER to confirm.
3 CC00-CC99
Color Jump function mode. Jump speed ranges from 00 (slow)
to 99 (fast). Press UP and DOWN keys to adjust the speed; press
ENTER to confirm.
4 Ed00-Ed99
Pulse Gradient function with speed ranging from 00 (slow) to 99
(fast). Press UP and DOWN keys to adjust the speed; press ENTER
to confirm.
5 Er00-Er99
7-color Running #1 function with jump speed ranging from 00
(slow) to 99 (fast). Press UP and DOWN keys to adjust the speed;
press ENTER to confirm.
NOTE: In case of multiple MOODLINER 1430WP bars connected
through a DMX-In/Out daisy chain and with different Id value
assigned to each of them, you can realize a multi-table lamp
running water.
6 Po00-Po99
7-color Running #1 function with jump speed ranging from 00
(slow) to 99 (fast). Press UP and DOWN keys to adjust the speed;
press ENTER to confirm.
NOTE: In case of multiple MOODLINER 1430WP bars connected
through a DMX-In/Out daisy chain and with different ID value
assigned to each of them, you can realize a multi-table lamp
running water.
7 tr00-tr36
Auto Program Running with a selection of 36 presets with various
configuration. It ranges from 00 to 36. Press UP and DOWN keys
to choose the desired preset; press ENTER to confirm.
8 tU00-tu99
Auto Program Running speed adjustment from 00 (slow) to 99
(fast). Press UP and DOWN keys to adjust the speed; press ENTER
to confirm.
9 bE00-bE99
The MOODLINER 1430WP features a built-in microphone with light
effects controlled by the environment sound. The microphone sen-
sibility ranges from 00 (less sens.) to 99 (more sens.). Press UP and
DOWN keys to modify the sensitivity; press ENTER to confirm.
10 r000-r255
Red color manual dimmer. It ranges from 000 to 255. Press UP
and DOWN keys to change the brightness level; press ENTER to
confirm.
11 G000-G255
Green color manual dimmer. It ranges from 000 (dark) to 255 (max
brightness). Press UP and DOWN keys to change the brightness
level; press ENTER to confirm.
12 b000-b255
Blue color manual dimmer. It ranges from 000 (dark) to 255 (max
brightness). Press UP and DOWN keys to change the brightness
level; press ENTER to confirm.
13 o000-o255
White color manual dimmer. It ranges from 000 (dark) to 255 (max
brightness). Press UP and DOWN keys to change the brightness
level; press ENTER to confirm.

1313
MOODLINER 1430WP User Manual
Eng
14 Id01-Id18
In case of multiple MOODLINER 1430WP units connected through
a DMX-In/Out daisy chain, you can assign to each of them one
of the 18 ID values, and use the multiple connection to realize
amazing multi-table lamp running water effects. Lamp ID ranges
from 01 to 18. Press UP and DOWN keys to change ID value; press
ENTER to confirm.
6.1. Setting the DMX Address
When selecting a starting DMX address, always consider the number of DMX chan-
nels of each mode. If you choose a starting address that is too high, you could re-
strict the access to some of the product channels. MOODLINER 1430WP uses 9, 23,
56 and 65 DMX channels according to the selected mode, which defines the highest
configurable address, respectively, to 496, 485 and 391 to have all channels control-
lable. This allows you to control of up to 56 units in the 9-channel control mode, 22
units in the 23-channel, 9 units in the 56-channel and 7units in the 65-channel mode.
7 - dMX Channel assignMenTs and Values
As anticipated, the MOODLINER 1430WP can use 9, 23, 56 and 65 DMX channels.
Below you can see the assignment of each channel.
7.1. 9-ch DMX512 Channel Chart
CH Function Value Description.
CH1 Dimmer 000-255 R, G, B, W dimmer, from (0-100%)
CH2 Strobe 000-255 R, G, B, W strobe, from slow to fast (0-100%)
CH3 Function 1
000-036 No effect
037-045 No effect
046-050
Rainbow water effects (Jump). In case of multiple
bars with different ID as-signed to each of them, you
can make water multiple-chase effects. Channel 4
will change effect direction; CH1 and CH6-to-CH9
will control master and single-color dimmer.
051-055
Rainbow water effects (Jump gradually). In case of
multiple bars with differ-ent ID assigned to each of
them, you can make water multiple-chase effects.
Channel 4 will change effect direction; CH1 and
CH6-to-CH9 will control master and single-color
dimmer.
056-060 Static Colors. Move channel-4 to 056-060 first, then
choose colors by using channel 1-to-4.
061-065 Jump effect. *
066-070 Gradually and Pulse color change. *
071-075 Running effect 1. *
076-080 Running effect 2. *

1414
MOODLINER 1430WP User Manual
Eng
CH3 Function 1
081-085 Running effect 3. *
086-090 Running effect 4. *
091-095 Running effect 5. *
096-100 Running effect 6. *
101-105 Running effect 7. *
106-110 Running effect 8. *
116-120 Running effect 9. *
121-125 Running effect 10. *
126-130 Running effect 11. *
131-135 Running effect 12. *
136-140 Running effect 13. *
141-145 Running effect 14. *
146-150 Running effect 15. *
151-155 Running effect 16. *
156-160 Running effect 17. *
161-165 Running effect 18. *
166-170 Running effect 19. *
171-175 Running effect 20. *
176-180 Running effect 21. *
181-185 Running effect 22. *
186-190 Running effect 23. *
191-195 Running effect 24. *
196-200 Running effect 25. *
201-205 Running effect 26. *
206-210 Running effect 27. *
211-215 Running effect 28. *
216-220 Running effect 29. *
221-225 Running effect 30. *
226-230 Running effect 31. *
231-235 Running effect 32. *
236-240 Running effect 33. *
241-245 Running effect 34. *
246-250 Running effect 35. *
251-255 Sound Control. *
CH4 Function 2
000-008 No effect
009-012 Running effect 1. *
013-018 Running effect 2. *
019-025 Running effect 3. *
026-030 Running effect 4. *
031-032 Running effect 6. *
033-039 Running effect 7. *

1515
MOODLINER 1430WP User Manual
Eng
CH4
Function 2
040-046 Running effect 8. *
047-053 Running effect 9. *
054-060 Running effect 10. *
061-067 Running effect 11. *
068-074 Running effect 12. *
075-081 Running effect 13. *
082-088 Running effect 14. *
089-095 Running effect 15. *
096-102 Running effect 16. *
103-109 Running effect 17. *
110-116 Running effect 18. *
117-123 Running effect 19. *
124-130 Running effect 20. *
131-137 Running effect 21. *
138-144 Running effect 22. *
145-151 Running effect 23. *
152-158 Running effect 24. *
159-165 Running effect 25. *
166-172 Running effect 26. *
173-179 Running effect 27. *
180-186 Running effect 28. *
187-193 Running effect 29. *
194-200 Running effect 30. *
201-207 Running effect 31. *
208-214 Running effect 32. *
215-221 Running effect 33. *
222-228 Running effect 34. *
229-235 Running effect 35. *
236-242 Running effect 36. *
243-249 Running effect 37. *
250-255 Running effect 38. *
Function 3
000-127
When Channel 3 value is between 46 and 55 (Jamp/
Fade Rainow ef-fects), Channel 4 controls the direc-
tion from left to right.
128-255
When Channel 3 value is between 46 and 55 (Jamp/
Fade Rainow effects), Channel 4 controls the direc-
tion from right to left.
000-255 When Channel 3 value is between 56 and60 (static
colors), Channel 4 changes colors
CH5 Function speed 000-255 Adjusts Function speed from slow to fast (0-100%)
CH6 R dimming 000-255 Red color linear dimming (0-100%)
CH7 G dimming 000-255 Green color linear dimming (0-100%)

1616
MOODLINER 1430WP User Manual
Eng
CH8 B dimming 000-255 Blue color linear dimming (0-100%)
CH9 W dimming 000-255 White color linear dimming (0-100%)
* Use CH1 and CH6-to-CH9 to control master and single-color dimmer.
7.2. 23-ch DMX512 Channel Chart
CH Function Value Description.
CH1 Dimmer 000-255 R, G, B, W dimmer, from (0-100%)
CH2 Strobe 000-255 R, G, B, W strobe, from slow to fast (0-100%)
CH3 Function 1
000-036 No effect
037-045 No effect
046-050
Rainbow water effects (Jump). In case of multiple
bars with different ID as-signed to each of them, you
can make water multiple-chase effects. Channel 4
will change effect direction; CH1 and CH6-to-CH9
will control master and single-color dimmer.
051-055
Rainbow water effects (Jump gradually). In case of
multiple bars with differ-ent ID assigned to each of
them, you can make water multiple-chase effects.
Channel 4 will change effect direction; CH1 and
CH6-to-CH9 will control master and single-color
dimmer.
056-060 Static Colors. Move channel-4 to 056-060 first, then
choose colors by using channel 1-to-4.
061-065 Jump effect. *
066-070 Gradually and Pulse color change. *
071-075 Running effect 1. *
076-080 Running effect 2. *
081-085 Running effect 3. *
086-090 Running effect 4. *
091-095 Running effect 5. *
096-100 Running effect 6. *
101-105 Running effect 7. *
106-110 Running effect 8. *
116-120 Running effect 9. *
121-125 Running effect 10. *
126-130 Running effect 11. *
131-135 Running effect 12. *
136-140 Running effect 13. *
141-145 Running effect 14. *
146-150 Running effect 15. *
151-155 Running effect 16. *

1717
MOODLINER 1430WP User Manual
Eng
CH3 Function 1
156-160 Running effect 17. *
161-165 Running effect 18. *
166-170 Running effect 19. *
171-175 Running effect 20. *
176-180 Running effect 21. *
181-185 Running effect 22. *
186-190 Running effect 23. *
191-195 Running effect 24. *
196-200 Running effect 25. *
201-205 Running effect 26. *
206-210 Running effect 27. *
211-215 Running effect 28. *
216-220 Running effect 29. *
221-225 Running effect 30. *
226-230 Running effect 31. *
231-235 Running effect 32. *
236-240 Running effect 33. *
241-245 Running effect 34. *
246-250 Running effect 35. *
251-255 Sound Control. *
CH4 Function 2
000-008 No effect
009-012 Running effect 1. *
013-018 Running effect 2. *
019-025 Running effect 3. *
026-030 Running effect 4. *
031-032 Running effect 6. *
033-039 Running effect 7. *
040-046 Running effect 8. *
047-053 Running effect 9. *
054-060 Running effect 10. *
061-067 Running effect 11. *
068-074 Running effect 12. *
075-081 Running effect 13. *
082-088 Running effect 14. *
089-095 Running effect 15. *
096-102 Running effect 16. *
103-109 Running effect 17. *
110-116 Running effect 18. *
117-123 Running effect 19. *
124-130 Running effect 20. *
131-137 Running effect 21. *

1818
MOODLINER 1430WP User Manual
Eng
CH4
Function 2
138-144 Running effect 22. *
145-151 Running effect 23. *
152-158 Running effect 24. *
159-165 Running effect 25. *
166-172 Running effect 26. *
173-179 Running effect 27. *
180-186 Running effect 28. *
187-193 Running effect 29. *
194-200 Running effect 30. *
201-207 Running effect 31. *
208-214 Running effect 32. *
215-221 Running effect 33. *
222-228 Running effect 34. *
229-235 Running effect 35. *
236-242 Running effect 36. *
243-249 Running effect 37. *
250-255 Running effect 38. *
Function 3
000-127
When Channel 3 value is between 46 and 55 (Jamp/
Fade Rainow ef-fects), Channel 4 controls the direc-
tion from left to right.
128-255
When Channel 3 value is between 46 and 55 (Jamp/
Fade Rainow effects), Channel 4 controls the direc-
tion from right to left.
000-255 When Channel 3 value is between 56 and60 (static
colors), Channel 4 changes colors
CH5 Function speed 000-255 Adjusts Function speed from slow to fast (0-100%)
CH6 R dimming 000-255 Red color linear dimming (0-100%)
CH7 G dimming 000-255 Green color linear dimming (0-100%)
CH8 B dimming 000-255 Blue color linear dimming (0-100%)
CH9 W dimming 000-255 White color linear dimming (0-100%)
CH10 Led 1 dimmer 000-255 R, G, B, W dimmer (0-100%)
CH11 Led 2 dimmer 000-255 R, G, B, W dimmer (0-100%)
CH12 Led 3 dimmer 000-255 R, G, B, W dimmer (0-100%)
CH13 Led 4 dimmer 000-255 R, G, B, W dimmer (0-100%)
CH14 Led 5 dimmer 000-255 R, G, B, W dimmer (0-100%)
….. ….. ….. …..
CH23 Led 14 dimmer 000-255 R, G, B, W dimmer (0-100%)
* Use CH1 and CH6-to-CH9 to control master and single-color dimmer.

1919
MOODLINER 1430WP User Manual
Eng
7.3. 56-ch DMX512 Channel Chart
CH Function Value Description.
CH1 Led 1 dimmer 000-255 Red 1 linear dimmer (0-100%)
CH2 Led 1 dimmer 000-255 Green 1 linear dimmer (0-100%)
CH3 Led 1 dimmer 000-255 Blue 1 linear dimmer (0-100%)
CH4 Led 1 dimmer 000-255 White 1 linear dimmer (0-100%)
CH5 Led 2 dimmer 000-255 Red 2 linear dimmer (0-100%)
CH6 Led 2 dimmer 000-255 Green 2 linear dimmer (0-100%)
CH7 Led 2 dimmer 000-255 Blue 2 linear dimmer (0-100%)
CH8 Led 2 dimmer 000-255 White 2 linear dimmer (0-100%)
….. ….. ….. …..
CH56 Led 14 dimmer 000-255 White 14 linear dimmer (0-100%)
7.4.65-ch DMX512 Channel Chart
CH Function Value Description.
CH1 Dimmer 000-255 R, G, B, W dimmer, from (0-100%)
CH2 Strobe 000-255 R, G, B, W strobe, from slow to fast (0-100%)
CH3 Function 1
000-036 No effect
037-045 No effect
046-050
Rainbow water effects (Jump). In case of multiple
bars with different ID as-signed to each of them, you
can make water multiple-chase effects. Channel 4
will change effect direction; CH1 and CH6-to-CH9
will control master and single-color dimmer.
051-055
Rainbow water effects (Jump gradually). In case of
multiple bars with differ-ent ID assigned to each of
them, you can make water multiple-chase effects.
Channel 4 will change effect direction; CH1 and
CH6-to-CH9 will control master and single-color
dimmer.
056-060 Static Colors. Move channel-4 to 056-060 first, then
choose colors by using channel 1-to-4.
061-065 Jump effect. *
066-070 Gradually and Pulse color change. *
071-075 Running effect 1. *
076-080 Running effect 2. *
081-085 Running effect 3. *
086-090 Running effect 4. *
091-095 Running effect 5. *
096-100 Running effect 6. *
101-105 Running effect 7. *
106-110 Running effect 8. *

2020
MOODLINER 1430WP User Manual
Eng
CH3 Function 1
116-120 Running effect 9. *
121-125 Running effect 10. *
126-130 Running effect 11. *
131-135 Running effect 12. *
136-140 Running effect 13. *
141-145 Running effect 14. *
146-150 Running effect 15. *
151-155 Running effect 16. *
156-160 Running effect 17. *
161-165 Running effect 18. *
166-170 Running effect 19. *
171-175 Running effect 20. *
176-180 Running effect 21. *
181-185 Running effect 22. *
186-190 Running effect 23. *
191-195 Running effect 24. *
196-200 Running effect 25. *
201-205 Running effect 26. *
206-210 Running effect 27. *
211-215 Running effect 28. *
216-220 Running effect 29. *
221-225 Running effect 30. *
226-230 Running effect 31. *
231-235 Running effect 32. *
236-240 Running effect 33. *
241-245 Running effect 34. *
246-250 Running effect 35. *
251-255 Sound Control. *
CH4 Function 2
000-008 No effect
009-012 Running effect 1. *
013-018 Running effect 2. *
019-025 Running effect 3. *
026-030 Running effect 4. *
031-032 Running effect 6. *
033-039 Running effect 7. *
040-046 Running effect 8. *
047-053 Running effect 9. *
054-060 Running effect 10. *
061-067 Running effect 11. *
068-074 Running effect 12. *
075-081 Running effect 13. *